How To Fix Dish Network Signal Loss? (Guide)

Paying for a TV subscription but not being able to use it to its full potential is the worst thing that could ever occur to anyone. Even worse is when a dish network signal loss causes you to miss your favorite TV show or live program.

Dish Network Signal Loss
Dish Network Signal Loss

Dish Network Signal Loss, it’s crucial to have some fundamental knowledge about repairing a dish network signal loss to avoid having to cope with such inconveniences. This will go a long way toward making sure you can still watch all of your favorite shows.

The signal loss warning that appears on the screen is typically a hint that there is a problem with the cable connection, that the signals are being distorted by the weather, or that there is a problem with the service provider. As a result, the signal strength cannot be determined.

Troubleshooting: Issues on Dish Network Signal Loss

Your satellite dish is not properly aligned.This is the most common cause of signal loss. You can try realigning the dish yourself or calling Dish Network for assistance.
There is an obstruction blocking the satellite dish.Trees, buildings, and other objects can block the signal from the satellite. If you can identify the obstruction, try to move it or reposition the dish.
Your receiver is not receiving power.Make sure that the receiver is plugged in and that the power cord is not damaged. You can also try restarting the receiver.
Your receiver is outdated.If your receiver is more than a few years old, it may not be compatible with the latest satellite signals. You may need to upgrade your receiver to fix the signal loss issue.
There is a problem with the satellite signal.This is rare, but it can happen. If you have tried all of the above solutions and you are still having signal loss, you may need to contact Dish Network for further assistance.

Video: Troubleshoot a Signal Loss Error


Every issue has a cause, and Dish outages can happen for any number of causes. We can solve the signal loss fault on the Dish network on your Samsung tv if we are aware of its possible sources. Here are some of the root reasons for this terrible problem;

How Troubleshoot Complete or Partial DISH Signal Loss?

With your DISH receiver (marked by a red tag), unplug the power cable from the wall socket for 10 seconds before plugging it back in. Turn off the Hopper by disconnecting its power line from the wall (the main, large receiver). It might take up to 5 minutes for the reset to take effect.

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)

Signal Interference

The impediment that stands between your dish antenna and the satellite is typically to blame for the signal loss problem. A building, a tree, or any other item that prevents the transmission of signals between the antenna and satellite can be considered an obstacle.

The Cables Could Be Slack.

Another possibility is that the receiver’s cables are not correctly plugged in. Perhaps you moved the receiver and in the process, the cords fell loose. Sometimes the cables just gradually become looser over time without your knowledge. In either case, a signal loss will result on your Satellite tv too.

A Bad Climate

This is a significant additional reason for dish network signal loss. You actually have no control over the weather. 

However, a few things might be able to help. Unfavorable weather conditions, such as dense clouds, might obscure signals and lead to their loss. Storms and torrential rain might also distort the signals on any tv channel.


Many people experience a signal loss due to severe weather frequently, and the only thing they can do is wait it out. Most of the time, it’s only a short-term issue, and after the severe weather passes, the signal strength will improve.


However, it’s usually simpler to avoid a problem in the first place. Here are some very helpful suggestions to assist you both prevent dish network signal loss due to bad weather and cure the problem.

  • Unplug the receiver’s power chord from the outlet if it starts to rain or there is inclement weather and you start to have signal problems or no signal at all. Before plugging it back in, wait at least ten seconds. If not, move on to the next tip. This might resolve the problem to your local channel.
  • Verify that the coaxial cable is securely attached to the decoder. If not, there is a possibility that it is preventing the signal from being delivered. Secure it.
  • Ensure that the decoder is not installed too distant from the dish antenna. In reality, the signal weakens with distance. Thus the closer your dish is to the receiver, the better the tv signal.
  • Check the coaxial cable for any cuts or breaks. Perhaps the severance allows water to enter the cable, which results in the signal being lost. To fully resolve the issue, replace the problematic portion or the entire cable.
  • Get a larger dish antenna, especially if you live where it rains a lot. This will aid in preparing for the possibility of signal loss during rain. You can speak with them to find out if your service provider offers a dish upsize to a local channel.
  • Your dish installation should use an upright polar mount. Prepare yourself for occasional signal loss troubles if it isn’t. The dish should be durable, as well. This means that it shouldn’t be affected by the wind and you shouldn’t feel any vibrations when there is a breeze.


In reality, severe weather is frequently blamed for the dish network signal loss problem. However, there are occasions when the weather is favorable, and you still experience the same problem on your smart tv.


This time, it might be something else, like a receiver issue. The receiver can frequently be fully discharged to resolve this. Here’s how you approach it;

  • Remove the receiver’s plug from the power supply.
  • The receiver’s power button should be depressed and held down for at least 15 seconds.
  • Reconnect the receiver to the power socket and hold the button down for roughly 10 seconds.
  • Give it some time to start up by pressing the power button on it.
  • Verify to see if the problem has been resolved or still exists.

When a signal loss occurs on Dish, and none of your favorite TV stations are available, all you can do is this. When all else fails, and the issue still exists, it might be time to get in touch with customer service.

The issue could be coming from the provider’s end. It’s also possible that the hardware setup is flawed. Contact customer service so they may send a technician to look at the problem and quickly resolve it.

How To Get Free Satellite TV With A Dish? (Answered!)


There are ways to avoid signal loss when it’s bad outside. However, signal loss in good conditions can be difficult. Contact Dish customer service for additional assistance if the troubleshooting technique we have described does not work.

Frequently Asked Questions

When your Dish TV reports no signal, what should you do?

Your DISH receiver’s power cord should have a red tag; unplug it from the socket for 10 seconds, then plug it back in. It could take up to five minutes to finish the reset procedure.

What can I do to regain my satellite signal?

This is as a result of your dish antenna’s dish antenna blocking or distorting the signal coming from space. Regain your signal by waiting out the storm. If the sky is clear, you can “Hard Reset” your Dish receiver by unplugging it for 10 seconds.

Why is there no satellite signal?

This notification indicates a satellite reception issue with the set-top box. Weather, obstacles, local cabling, dish alignment, and wear and tear are a few of the potential culprits.

What is DISH reset button?

You must reset your Dish Network receiver each time you wish to undo modifications you’ve made to it. The receiver returns to its normal settings after being reset. Except for the “All Chan,” “All Sub,” and “All HD,” your “Favorite Lists” will be removed.

Where is the DISH box’s reset button?

The power button is located on the left side of your receiver. Your receiver will reset if you hold down the power button for ten seconds before letting go. Some receiver types include a door that may be opened by pressing on it. Behind the door, in the top left and bottom left corners, respectively, are power and reset buttons.


CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts