How To Fix A Firestick Remote Not Working? (6 Best Answers)
Few things are more annoying during TV time than a remote that won’t respond. The Firestick remote is no exception, and these problems happen more often than you might think. If your Firestick remote has stopped working, you’ve come to the right place.

This post covers common reasons your Firestick remote may stop working, along with a fix for each one. Whether the problem is the batteries, an update bug, volume issues or something else, you can usually fix it.
Some of the most typical issues are listed here, along with suggestions on how to fix them.
Dead, weak, or improperly installed batteries are issue number one.
Troubleshooting: Common Firestick Remote Issues and Fixes
| Issue | Solution |
|---|---|
| Dead batteries | Replace the batteries with new ones. |
| Pairing issue | Press and hold the Home button on the remote for 10 seconds. |
| Remote not responding | Restart the Firestick by unplugging it from the power outlet for 30 seconds and then plugging it back in. |
| Remote not working after update | Unpair the remote from the Firestick and then pair it again. To pair the remote again, follow the steps in the “Pairing issue” solution above. |
| Remote damaged | If the remote is physically damaged, you may need to purchase a new one. |
Video: How to Fix a Firestick Remote Not Working
HOW CAN YOU CHECK IF YOUR FIRESTICK REMOTE HAS BATTERY ISSUES?
Firestick remote problems are often caused by batteries that are low on power or inserted incorrectly. Most of us know how to install and replace batteries, but mistakes still happen.
Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)
Batteries that worked a moment ago may seem fine, but that doesn’t mean they still have enough power to run the remote.
How to Reset Your Fire TV Remote
1. Unplug your Fire TV and wait one minute.
2. Press and hold the Left, Menu and Back buttons at the same time.
3. Release the buttons and wait 5 seconds.
4. Remove the batteries from the remote.
5. Plug your Fire TV back in and wait for the remote detection error message to appear on the screen.
6. Put the batteries back in the remote.
Sometimes banging the remote will briefly revive the batteries. Sound familiar? You probably know someone who has tried that fix, or maybe it brings back a few memories.
That fix doesn’t last, though. You’ll soon find yourself doing it again, possibly until the remote suffers internal damage or the batteries start to leak.
- Take the batteries out of the remote, paying close attention to how they were installed.
- Check the direction markers in the Firestick remote to make sure no one put the batteries in the wrong way. Batteries are often replaced, swapped or borrowed for another device, and it’s easy to put them back in incorrectly.
- If the batteries were installed correctly, replace them with new ones. Use matching batteries; never mix brands or types, since that can lead to leaking or worse.
If the remote still doesn’t work, the problem may be elsewhere. If you’re using rechargeable batteries, alkaline batteries might work better, because rechargeables may no longer hold a charge well.
Rechargeable batteries typically lose strength after several charge cycles and keep weakening until they stop working. Alkaline batteries are the best choice.
PROBLEM 2: FIRE TV REMOTE NOT WORKING ON YOUR CEC-ENABLED TV
Setting Up CEC with Your Firestick Remote for TV

Re-pairing often clears up CEC problems. For it to work, though, you need a TV that supports CEC.
With CEC, the remote sends the command to the Firestick, which passes it to the TV through the TV’s CEC-capable HDMI port.
Here’s the procedure.
- Make sure the Firestick has power, and turn on the TV.
- Find the CEC options in the TV’s settings (they vary by make and model) and turn on CEC. This lets the Firestick turn the TV on and off.
- Press the Power button on the Firestick remote to see whether it turns your TV on or off. If it does, you’re done. If it doesn’t, continue to Step 4.
- Turn on your TV manually or with its own remote, then check whether the Firestick remote works with the Firestick. If it doesn’t, move on to Step 5.
- If the remote doesn’t control the Firestick either, press and hold the Home button for 10 seconds to pair the remote, then test it on the TV. Repeat the process if needed.
If pairing doesn’t work, your Fire TV remote may need a reset. Amazon publishes one reset method for most Fire TV remotes, plus separate methods for the Basic Edition Remote and the Alexa Voice Remote (1st Gen). Visit Amazon to learn how to reset your Firestick remote.
PROBLEM 3: FIRESTICK NOT REACTING TO THE REMOTE
Check how far your remote is from the Fire TV Stick.
The remote has a limited range, so it may not work from across a large living room or from another room.
To see whether distance is the problem, move the remote closer to the Firestick and make sure nothing is blocking the path between them. If the remote only works when you’re very close to the TV, consider using an HDMI extender to reposition the Firestick, or change the batteries.
How To Fix Firestick Remote Volume Not Working? (Detailed Guide)
Re-Pair the Remote to the Firestick
Just as when the remote stops working with your TV, re-pairing your Fire TV Stick remote often gets it working with the Firestick again.
- Press and hold the Home button for 10 seconds to re-pair the remote.
- Your Fire TV Stick or Fire TV Cube should now respond to the remote.
- If it still doesn’t work, check the CEC settings: go to Settings > Display & Sounds > HDMI-CEC Device Control on the Firestick and make sure it’s turned on.
PROBLEM 4: REMOTE INCOMPATIBILITY
How can I check if my Firestick remote is compatible?
Have you recently replaced your old Firestick remote with a new one? If the new remote isn’t compatible with your Fire TV Stick, you may run into problems.

If you find that your remote isn’t compatible with your device, you can use your smartphone as a remote with the Fire TV app until you get a new one. The Fire TV app is available for both iPhone and Android. To use your smartphone as a remote, follow the steps below.
Download the Fire TV app on your smartphone.
Turn on the TV with its Power button or remote.
PROBLEM 5: DAMAGED REMOTE
Check for damage on your Fire TV remote
Your remote could stop working because of external damage or internal problems, such as component failure or water damage.
PROBLEM 6: FIRESTICK REMOTE NO LIGHT/NOT WORKING
If your Firestick remote doesn’t light up, try unplugging the Fire TV Stick from the back of your TV and waiting 20 seconds.

Plug it back in and see whether the problem is fixed. If the batteries are in good condition, a remote that doesn’t light up usually means it has lost its connection to the Firestick.
Fix the “No Light” Issue by Connecting Fire TV Stick Remote to TV
If unplugging and replugging the Firestick didn’t solve the issue, your Firestick remote may not be linked to the TV. To fix this, follow the steps below.
- Use the remote to turn on your Fire TV Stick.
- Press and hold the Home button for 10 seconds to pair the remote. Repeat the process if needed.
If these steps don’t fix the remote light/LED issue, make sure you’re close enough to the TV. As noted earlier, the Firestick remote has a limited range.
Also check that the batteries are installed correctly. They may simply be out of power and need replacing.
CONCLUSION
Not being able to use your Firestick remote is never fun. Fortunately, every problem has a fix, and the remote is no exception.
The two most common fixes are putting in fresh batteries and resetting and re-pairing the remote. If none of the advice in this article helps, you may want to contact Amazon customer support or get a new remote.
Frequently Asked Questions
To reset the remote, unplug your Fire TV device from power for 60 seconds. Then press and hold the Left, Menu and Back buttons on your remote for 12 seconds. Remove the batteries from the remote, plug your Fire TV device back in and wait for the remote detection error message to appear on the screen. Put the batteries back in and press the Home button.
Why won’t my remote work even with fresh batteries?
Make sure none of the remote’s buttons are stuck or jammed. The remote’s battery contacts may also be dirty. Remove the batteries, wipe the terminals with a cotton swab or soft cloth dampened with a little rubbing alcohol, then put the batteries back in.
Why won’t my Fire Stick remote work with new batteries?
Unplug your device from the outlet, then try the remote again. Reset the remote with the TV turned off. Make sure nothing is blocking the path between the TV and the remote. Check that your batteries are fresh and installed correctly (positive side up).
References:
https://www.amazon.com/gp/help/customer/display.html?nodeId=GMDKZSFRSX7NKKN3