How To Program GE Remote Codes For LG TV? (Complete Guide)

The remote codes for LG televisions. Here is a list of universal remote control codes for LG televisions. These codes are compatible with universal remote controls that can be programmed with a 3, 4, or 5-digit code. 

When properly programmed, the LG TV codes can be used with your existing UNIVERSAL, CABLE, or SAT remote. LG television universal remote control codes with 3, 4, and 5 digits.

WHEN YOUR GE REMOTE CODES GO MISSING

Universal remote controls are extraordinary inventions that can be nothing short of miraculous. Today, you can operate numerous devices with a single remote, which helps decrease clutter on your coffee table.

The GE Universal Remote Control is one of the most economical remotes available, while not my personal favorite. This popular remote is compatible with practically every LG television on the market. It is also compatible with DVD players, soundbars, AV receivers, and other entertainment equipment.

Check out this article on the best universal remotes for LG televisions to see some fantastic possibilities. You can also use an app to control your LG televisions.

Traditional IR-based universal remotes, such as the GE remote, can accomplish the task, but they require “codes” to enable control of specific devices. Almost sure this is true with your LG television.

If you have ever used a conventional universal remote, you know the drill: you must consult the manual to get the correct remote codes for your LG TV. If you, like me, have either a.) lost the documentation or b.) detest reading remote manuals with fine print. Look up the codes on this page.

Don’t fret. I have you covered and can spare you the trouble of perusing the documentation. I’ll also include some simple instructions for your remote control. But first, let me get you those codes.

GE REMOTE CODES FOR LG TVs

Like other GE universal remote codes, the list of GE Remote codes for LG TVs consists of four-digit model-specific codes. Consequently, codes can be utterly dissimilar across two LG TV models.

CL6 Codes List

However, some basic-level codes are compatible with most LG televisions, so I suggest you test these first. These are the fundamental codes for the GE Universal Remote:

• 0004
• 0050
• 0009
• 0005
• 0227
• 0338
• 0012
• 0057
• 0080
• 0156

These numbers may be sufficient to program your LG television with your GE universal remote. If the first one doesn’t work, work down the list until you find one that pairs your remote with your television.

HOW DO I FIND THE CODE LIST FOR MY LG TV?

Obtaining the required code is pretty simple. First, you flip over your universal remote to access the battery compartment. Then, search for a label with the Mode and Code list version inside.

There are three expected code list variations. First, check whether you possess CL3, CL4, or CL5. We have a detailed tutorial with illustrations illustrating how to complete this task.

If the basic codes above did not work, try the codes corresponding to the code list for your specific GE Universal Remote (the battery compartment will indicate CL3, CL4, or CL5 codes).

GE UNIVERSAL REMOTE CODES FOR LG TV (CL3)

• 3091,
• 1181,
• 1911,
• 0611,
• 0001,
• 3021,
• 1471,
• 0131,
• 5501,
• 5511,
• 0761,
• 3311,
• 0251,
• 3811,
• 4731,
• 5271,
• 3221,
• 3281,
• 1221,
• 0931,
• 3001,
• 1501

GE UNIVERSAL REMOTE CODES FOR LG TV (CL4)

• 1221,
• 3001,
• 5511,
• 0001,
• 1911,
• 6021,
• 1181

GE UNIVERSAL REMOTE CODES FOR LG TV (CL5)

• 6021,
• 0001,
• 5511,
• 3001,
• 1911,
• 1181,
• 1221

GE UNIVERSAL REMOTE CODES FOR LG SMART TVS

• 0156,
• 0338,
• 0004,
• 0227,
• 0005,
• 0080,
• 0012,
• 0050,
• 0009,
• 0057

HOW TO ENTERTAIN YOUR LG TV REMOTE CODE?

Once programmed, your GE universal remote is identical to any other remote control. There is nothing special about it except that it must be configured to function with various devices.

The good news is that you do not need any programming or electronics knowledge to make it work. As long as you have the remote codes for each device, connecting them to your LG television is essentially the same.

Follow the below instructions to program your GE remote to your LG television:

• Find the category of remote codes for your LG television.
• Start your LG television.
• Depress and maintain the Setup button.
• Wait until the LED indicator turns red.
• Press the Device button on your remote’s button row. (TV button).
• Utilizing the keypad, enter the first code on the list.
• The red LED light will turn off if the correct code is entered.
• Hold the remote in front of the LG television.
• To turn the device on, press the Power button.
• If the television shuts off, you have the correct code. Simply pressing it again will turn the television back on.
• Try a different code from the list if the device does not switch off.
• Once you have discovered the correct code, you may try the remaining buttons to ensure everything functions correctly.

DO THE CODES WORK IMMEDIATELY?

The top code is typically the most popular and should function quickly. If it does not, many additional remote codes can be picked from. Work your way down the list until you find a solution.

However, there are times when the issue needs to be code-related. For example, check the batteries in your remote, as weak batteries can cause programming errors. In addition, the remote may cease to function because it is not receiving sufficient power.

You may also encounter interruption from physical boundaries. Various everyday home items can easily obstruct the signal from your GE remote. Always maintain a clear line of sight between your remote and television.

WHAT IF THE CODES DO NOT WORK?

If none of the above codes work for your LG TV, it is not necessarily “game over.” Multiple codes are stored in the memory of your GE universal remote control, and you can instruct it to determine which one is compatible with your LG television.

Here’s how to program your GE remote automatically:

• Make sure your LG television is turned on.
• Press and hold the Setup button until the red LED light illuminates your remote.
• Select the TV icon on the remote.
• Wait until the red LED flashes once.
• Aim the remote control at the television and push the Power button.
• The remote will automatically test the TV’s code.
• Repeat this process until the television shuts off.
• When it turns off, you must switch it back on.
• Aim the remote at the TV and hit the Volume Up button
• Wait for the television to turn off.
• If so, hit the TV button to validate the code’s use.
• Turn on the television and test each button.

CONCLUSION

Here we are! This was all the information you required to obtain the GE remote codes for your LG television so that you can successfully connect and operate it. 

You should be able to locate the correct TV code. Don’t fret if it doesn’t work immediately. Take your time and adequately test each code to avoid missing it.

When you discover the correct code for your television, write it down so you can reaccess it if necessary. What are you waiting for, then? First, set up your universal remote to control your favorite shows with your GE remote and LG television.

FREQUENTLY ASKED QUESTIONS