Jumbo Universal Remotes Codes: How To Program?

Are you sick of using multiple remote controls for your home entertainment equipment? 

Or, rather than unwinding and experiencing relaxation, you were tense trying to figure out which remote to use for a device? If you own a Jumbo remote, this issue will be resolved immediately. 

You may program your devices into your Jumbo remote by using codes. Here is a straightforward and easy-to-follow guide on programming all your devices to create a centralized chain of command.

CODES FOR PROGRAMMING A JUMBO UNIVERSAL REMOTE

This article lists these codes. Ensure that you locate the correct code for the brand and model of your device. 

Note that this procedure may consume some of your time and that you may encounter errors and repetitions of steps along the way. Therefore, perform the task methodically and attentively read the instructions.

The entire process could be complicated and even difficult if you’re not very tech-savvy, but consider the benefits it will offer you once you’ve completed the assignment.

It is highly recommended that you record the codes that relate to the brand of your gadget so that you can quickly provide them when requested. In addition, it will save you additional time. 

Here is a guide on how to program the Jumbo universal remote control:

• First, power on the device you wish to program, such as your television or any other available device. Check the batteries in your remote and ensure that everything is operational to avoid interruptions during the process. 
• Aim your remote control toward the device for it to receive signals and respond to orders.
• Press the button on your remote that corresponds to the device you wish to program with the remote. For example, to program the television, push the TV button.
• Press the “Code Search” button for approximately three seconds until the light remains lit.
• Enter the device’s code using the number pad. The light will blink whenever a button is pressed. If the code is valid, the light will go out. If the light flashes, the code did not function properly. Multiple codes may exist for a device. If a code does not work, start over by pressing and holding the code search button until the light remains lit, then enter a new code.
• If the initial attempt was successful, repeat the same steps when programming your additional devices. 

Don’t worry if you fail on your first attempt; this is normal. This is the primary reason why there are many codes accessible for each brand so that you have multiple options when some of them do not work. 

Follow each step precisely, as a single error will compromise the entire procedure.

JUMBO UNIVERSAL REMOTE CODES

• ADMIRAL TV CODES – 001,173
• AIWA TV CODES – 195,196
• AKAI TV CODES – 002
• AOC TV CODES – 009,014,132,156,175
• APEX TV CODES – 214
• AUDIOVOX TV CODES – 053
• CITIZEN TV CODES – 009,042,053,058,105,109,177
• CRAIG TV CODES – 042,053
• DAEWOO TV CODES – 018,019,042,058,082,085,097,100,126,127,130,138
• EMERSON TV CODES – 035,036,037,038,039,040,041,042,043,045,049,051,053
• FUJITSU TV CODES – 051,197
• FUNAI TV CODES – 042,051,053,155,189,198
• GE TV CODES – 015,022,031,044,052,054,055,087,092,103,107,125,164
• HITACHI TV CODES – 

• 001,004,009,013,059,060,061,088,091,137,139,140,141,142,143,144
• HAIER TV CODES – 216,217
• JENSEN TV CODES – 004,009
• JVC TV CODES – 013,054,055,060,065,067,089
• LG TV CODES – 044,005,009,056,057,155,156,172
• MAGNAVOX TV CODES – 004,008,009,062,068,069,074,075,077,089
• MEMOREX TV CODES – 000,001,004,009,049,051,135
• MITSUBISHI TV CODES – 004,005,009,022,051,081,089,132,180
• NEC TV CODES – 003,004,005,009,010,085,089,095
• PANASONIC TV CODES – 003,051,055,062,070,148,170,171
• PHILIPS TV CODES – 062,068,069,074,075,077,086,087,089,163,183
• PIONEER TV CODES – 004,009,090,179,185

• PROSCAN TV CODES – 000,015,031,107
• QUASAR TV CODES – 003,054,055,062,070,148,170,171
• RCA TV CODES – 007,009,011,015,048,082,092,094,096,098,101,102,103,107,113
• SAMSUNG TV CODES – 004,005,009,015,104,105,106,109,172
• SANSUI TV CODES – 135,136
• SANYO TV CODES – 004,013,049,108,110,180,209
• SHARP TV CODES – 004,009,079,095,111,112,114,122,123,124,173
• SONY TV CODES – 002,006,071,128
• SYLVANIA TV CODES – 004,008,009,062,068,069,074,075,077,155,161,163,189,198
• TOSHIBA TV CODES – 013,049,089,105,109,117,118,120,159,178
• ZENITH TV CODES – 000,001,004,023,038,058,059,064,073,121,135,136

CODELESSLY PROGRAM JUMBO UNIVERSAL REMOTE

• Power up the television or device you wish to configure with this universal remote.
• Aim your remote control at the device.
• Press and hold the “Code Search” button on your remote until the remote’s light lights on. (it usually takes 3-4 seconds).
• To configure the device, press the button on the remote for device selection.
• Press the “TV” button to configure the TV or DVD button to establish a connection with the DVD player.
• Upon selecting the device, the remote’s light will flash and remain ON.
• Press and repeatedly press the “Power” button on the remote control until the device “Turns Off.” It indicates that your gadget has been correctly configured.
• Upon turning off the device, hit “Enter” to save the code, and the flashlight will turn off.

RETRIEVING CODE FOR JUMBO UNIVERSAL REMOTE PROGRAMMING

By retrieving the code from the remote’s memory, you can also program the universal remote with your television or any other device. This method will only work for individuals who have already configured their remote with the device; first-time users will be unable to use it. Consider how this approach operates:

• The first two steps will remain unchanged.
• Press the “Code Search” button on the remote for three seconds or until the little indicator light illuminates.
• Press the button of the device whose code you wish to obtain, such as TV, DVD, Blu-ray, etc. The remote’s light will initially blink, then remain ON.
• Now comes the tricky part. You must repeatedly push the numbers 0 through 9 and observe at which number the light blinks. The blinking light indicates that the proper number was pressed.
• To extract the second and third digits of the code, repeat step 4.

The remote’s light will switch off when the third digit is retrieved.

FREQUENTLY ASKED QUESTIONS

How do I couple my universal remote Innovage Jumbo?

Aim the remote control at the device and push and hold the CODE SEARCH button for at least three seconds until the red LED turns solid red. 3. Press the device button for the object you wish to program, such as a television, DVD player, or VCR, and the LED light will flicker once and then stay solid red.

What is the code for the Samsung Jumbo universal remote?

There are numerous ways to connect a universal remote to a Samsung television, but almost usually, a code is necessary. However, 0101 is the major code you should try first.

What is the secret code for the universal remote?

Changing the batteries will not affect your setup codes or advanced programming. Magic Key The MAGIC key configures the ONE FOR ALL 5 systems. Power The POWER button performs the same purpose on your previous remote.

How can a universal remote be programmed without codes?

If you do not have a code for your device, download and launch the One For All Setup App on your mobile device (iOS or Android) and search for your device. This Setup App provides complete access to our code database, from which you can obtain the most recent codes for your device.