How To Program Charter Remote Codes? (Comprehensive Guide)

Cable television provides a variety of remote controls for individuals with whistling issues. After receiving a new remote control, the next step is to program it to function with your television, cable television, DVD player, and audio device. 

However, not all paper remote controls are identical, and the programming procedure varies slightly between models.

Thanks to our team, you only have to go through the hassle of trying various codes once you find the correct one. Instead, this guide contains codes and instructions for configuring a Charter universal remote control.

KEY TAKEAWAY:

To program the remote, you must power the device and select the remote’s corresponding button. Then, press and hold the Setup button until it blinks twice, enter the numbers 9.9.1, and press the Power button. Press and hold Channel Up until the device shuts off.

CHARTER REMOTE CODES FOR DEVICES

It would be best to understand how to program a Charter remote to a TV. Upon examining the programming, you’ve likely concluded that learning it is relatively straightforward. 

As with any other new electronic device, it may take some time to get used to, but once you do, it is pretty user-friendly, even for those who need to be tech-savvy. 

The only tricky step is obtaining the correct credentials compatible with your TV brand/set. For your convenience, we have compiled a list that may assist you in locating the correct code compatible with your television:

TV Brand	Codes
Dynex	2049
Magnavox	1867, 1454, 2597, 1755, 0171, 0051, 1365, 1913, 1963, 1990, 2492
LG	1423, 0178, 0017, 1768
Philips	1867, 1454, 2597, 0171, 1365, 1990, 2492, 2622, 2992
Panasonic	1480, 1927, 1947, 1925, 0051
Samsung	0178, 0812, 1959, 2051
RCA	0047, 0090, 0051, 1661, 1868, 1958, 1959, 2183,2434, 2746, 2932, 2855, 3382, 3577, 3717
Zenith	1423, 0178, 0047, 0017, 0463, 1661, 1365
Sharp	2360
TCL	2434
Sony	0810, 1685
Vizio	1758, 2707, 0864, 1756, 0885
Toshiba	1524, 1343, 1369, 1935, 1959, 2684
Insignia	1524, 1343, 1369, 1935, 1959, 2684

PROGRAMMING INSTRUCTIONS FOR A CHARTER REMOTE CONTROL

The codes, which are typically four digits, are tailored to the brand of your TV or device for optimal connection. If the remote is not coupled, the television cannot be operated. Typically, the codes are located in the user manual or on the website of the universal remote.

No need to worry if you cannot locate any code on the website or in the manual. Our team compiled a list of all codes beneath the tutorials. Scan through them until you locate the brand of your device.

In addition, you can configure the remote to the television by scanning the remote. It should be your following action if you cannot locate a valid code for your device. During scanning, the remote will explore its memory for all available codes and provide the one corresponding to the TV or device brand.

SCANNING TECHNIQUE

Use the instructions below to scan your remote.

• Activate the device (TV, DVR [1], etc.) 
• Press the corresponding icon on your remote control.
• Hold down the Configuration button until it blinks twice.
• Input the numerals 9.9.1.
• Aim the remote control at the device and press the Power button.
• Press and hold Channel Up until the device shuts off.
• Choose the Power icon to activate the device. Press the Setup button, then.

TV PROGRAMMING WITH CODES

If you want to avoid going through the scanning procedure, below are instructions for setting up TV remote codes for Charter. 

• Turn on the television you wish to connect with the remote control.
• Press Power on the remote’s button.
• Hold the TV and SEL controls simultaneously. Wait until the LED flashes twice.
• Input your TV code from the list supplied below. Use the keypad on your remote to enter the numbers. 
• After entering the numbers, observe the remote’s behavior. If the LED blinks once, it indicates that the entered code is valid. A long blink indicates that the inputted code was incorrect.
• If the LED light blinks once, verify that the remote has been completely programmed in time. Press the Power button to switch the TV off. If the television turns off, the entered code is accurate.
• If no response is received, use a different code and repeat steps two through five.

Now that you know how to pair your Charter remote with a TV, the codes method may take some time. If you prefer a more convenient alternative, our audiovisual team recommends using the code search method.

HOW TO CONNECT THE CHARTER REMOTE TO THE TELEVISION – STEP-BY-STEP GUIDE?

• First, you must locate a four-digit code corresponding to your television brand. This code can be in the manual with the Charter TV remote’s remote control. If, for some reason, you are unable to obtain the manual, you can still obtain the code through Spectrum’s official website or the list provided in this article. You can also contact Spectrum customer service online or by calling their toll-free number to have all your questions answered immediately by a representative.
• Second, the device that will be programmed must be powered on. Then, you must hit the corresponding button; for instance, if you wish to program your DVR, press the DVR button on the remote.
• The next step is to press the Setup button. It would help if you continued to hold the trigger until a red light blinked twice.
• Now, input the four-digit passcode using the keypad. Then, the Power button must be pressed until the device is turned off. If it is not turned off, you must restart the process only from the third stage.

HOW TO CONFIGURE THE CHARTER CABLE REMOTE FOR TV – LOCATE THE CODES FIRST?

If you could not discover the corresponding code and could not figure out how to program a Charter remote to a TV, try scanning your remote to search its memory for the correct code. 

To scan the correct code and link the Charter cable remote to the television, you must examine its memory to determine its stored codes. This procedure can be time- and energy-intensive. Follow the procedures listed below to ensure that your scanning process is effective.

• First, activate the device, which must be programmed.
• Then, press the icon associated with the device (TV, DVR, etc.) to be programmed.
• Following this, hold the Setup button until a red light blinks twice.
• Enter 9.9.1 utilizing the keypad.
• The memory of the remote you intend to use may contain hundreds of codes. Therefore, only strike the button associated with the device you wish to program.
• The indicator will flash twice, whether a DVR, television, or audio device.
• While facing the device, press the Power button on the Charter remote control.
• Hold the Channel Up button until the device is turned off.
• Press the Power button to switch the device on, then press the Setup button. The code will be made inaccessible.

CONCLUSION

If you still need help connecting the Charter cable remote to your television, we recommend repeating the steps above and contacting Spectrum’s customer service if the issue persists. 

Now that you know how to connect the Charter remote to the television, nothing can prevent you from enjoying Spectrum’s limitless entertainment options.

Check the list of codes and find a step-by-step guide online for complete information on how to set up a Charter remote to a TV set if you want to learn how to program a Charter remote to an Emerson TV, a Panasonic TV, a Vizio TV, or any other set up.

FREQUENTLY ASKED QUESTIONS