Emerson TV Remote Codes: How To Program? (Easy Guide)

Commonly, remotes control intelligent devices such as televisions, gaming consoles, and home theaters. Universal Remote is an alternative or replacement for the original TV remote. 

Using the Emerson TV Universal Remote Codes, it can be programmed to operate specific TV devices. This article provides a clear and straightforward guide for programming your remote with Emerson TV Remote Codes.

Check the various Emerson TV Remote Codes and Emerson TV remote troubleshooting techniques mentioned in this article for assistance. Using the Emerson TV Universal Remote Code, the following sections of this article will explain how to program your remote control.

CODES FOR EMERSON TV UNIVERSAL REMOTES

The list of Emerson TV Universal Remote Codes is provided below. These three, four, or five-digit Emerson TV Remote Setup Codes must attach the remote to the television. First, select Emerson Remote Control Codes and follow the programming instructions.

EMERSON JUMBO UNIVERSAL REMOTE CODE

039	024
155	116
189	049
043	051
042	035
045	036
037	041
038	135
147	053
177	023
040	025
004	009
198	179

GE EMERSON TV REMOTE SETUP CODE

0053	0051
0135	0049
0189	0004
0045	0233
0024	0179
0023	0250
0041	0042
0021	0044
0035	0009
0265	0027
0025	0266
0034	0040
0037	0310
0032	0456
0227	0257
0252	0130
0030	0254
0039	0147

RCA EMERSON TV REMOTE CONTROL PROGRAMMING CODE

1043	1024
1162	1123
1027	1028
1044	1124
1049	1048
1046	1047
1073	1035
1041	1025
1177	1038
1012	1037
1032	1033
1031	1034
1030	1029
1171	1004
1196	1026
1042	1039
1179	1006
1191	1023
1208	1036

DIRECTV REMOTE CODES FOR EMERSON TV

10154	11929
10463	10180
10236	11394
10178	11928
10171	11911
11944	10280
11963	10270
10282	10623

EMERSON TV CODES FOR ONE FOR ALL REMOTE

0037	0178
0668	0714
0556

PHILIPS REMOTE CODES FOR EMERSON TV

0605	0106
0305	0304
0502	0005
0104	0705
0626	0906
0805	0614
0004	0505
0002	0115
0105	0706
0506	0006
0316	0247
0228	0826
0520	0027
0632	0134
0324	0924
0903	0804
0519	0703
0604	0327
0128

DISH NETWORK TV REMOTE CODES EMERSON

679	569
568	846
567	505
527	672
694	528

ONE FOR ALL REMOTE EMERSON TV REMOTE CONTROL PROGRAMMING CODE

0227	0039
0189	0233
0130	0147
0053	0004
0049	0051
0044	0009
0135

4 DIGIT EMERSON TV CODE LIST

0205	3203
0650	3005
3025	3031
3204	3010
3008	0490
3218	3186
3011	3015
0198	0263
3013	0207
3012	0181

BLACKWEB UNIVERSAL REMOTE CODES FOR EMERSON TV

0249	0040
0045	0252
0259	0039
0231	0179
0130	0034
0237	0032
0037	2423
0023	0027
2455	2472
2324	2471
2477	1141
1173	2467
3014	0198
2454	0004
3109	3110
1172	3022

3 DIGIT EMERSON TV CODE LIST

526	528
527	523
655	657
846	535
544	691
777	533
537	720
632	536
534	654

DIRECTV REMOTE CODES FOR EMERSON TV

10236	10154
10180	10463
10623	11394
10171	10178
11944	11928
11963	10282
11911	10280
11929	10270

EMERSON CODE FOR SPECTRUM REMOTE

1913	1661
1963	238
1578	3559
1454	1997
0236	2051
1142	0178
1665	0451
2183	0180
051	236
363	143
151	0463
050	1864
116	0154
028	0171
043	121
076	153
127	048
004	005
096	155
252	168
052	247
231	154

MAGNAVOX UNIVERSAL REMOTE CODES FOR EMERSON TV

0043	0054
0044	0056
0041	0045
0028	0047
0042	0046

VIVITAR UNIVERSAL REMOTE CODES FOR EMERSON TV

0623	0171
0181	1944
0154	0463
0182	0236
0185	0180
0270	0178
0280	0179
0183	1963

HOW TO PROGRAM AN EMERSON TV REMOTE WITHOUT THE CODE? 

Users can program their universal remote without Emerson TV Universal Remote Codes. In this instance, the auto code search technique is utilized during the remote’s scanning process. 

It simultaneously examines only one code to locate programming code suitable for a particular device. Below are instructions for using the Auto Code Search procedure.

• Turn on the smart device you wish to control with your universal remote, such as a TV, audio system, or DVD player.
• “Activate” the universal remote.
• “Press the specific device button for three seconds” on the remote control.
• The device-specific LED will illuminate when the Universal Remote is ready to be programmed for your device.
• Point the remote at the device and simultaneously press the CH+ and CH- buttons until the On/off indicator appears.
• Then, continuously press the UP and DOWN buttons until the device powers off.

This method will scan the correct barcode for your device.

Verify the specified code by tapping the Power button and adjusting the volume and channel to ensure the programming functions properly.

• In this case, the device will turn on when the power button is pressed.
• To store the specified code on the universal remote, “press the device button.”
• The device’s LED will blink twice to signify that the code has been saved.

METHODS FOR PROGRAMMING THE EMERSON TV UNIVERSAL REMOTE

Specific remote control devices include remotes that are already activated. In addition, the Emerson TV Universal Remote controls multiple devices as a replacement or alternative device.

Therefore, it must be programmed or configured to control any device with the Emerson TV remote. Programming the Emerson Remote is a straightforward and time-efficient procedure that is a replacement controller for any remote-controlled device.

Below are five straightforward methods for programming the Emerson TV remote.

• Browse the Emerson Remote Support website.
• Locate the specific television device’s device code from the table on the Emerson Remote Support website.
• Turn on the TV you desire to control with the Emerson TV remote.
• Press the Device icon labeled Presence TV for three seconds on the upper portion of your Emerson TV Universal Remote.
• The Emerson TV Universal Remote can be linked to your device by pressing the TV button and entering the specified DIG code.
• After programming the remote with your device, you should always test its functionality by adjusting the channel and volume.

HOW TO RECONFIGURE THE EMERSON TELEVISION REMOTE?

A remote control is used to control any digital device. The majority of the time, manufacturers provide pre-activated remotes with specific devices. However, in many cases, users prefer to use their existing universal remotes to control their new devices. 

In this case, the remote, coupled with the old device, has to be reset manually. However, obsolete pairing data is often deleted automatically due to device programming. Therefore, resetting the Emerson TV Universal Remote is a straightforward process. Here are six straightforward methods for resetting the Emerson TV Universal Remote.

• To reset the Emerson Universal TV Remote’s settings. First, the batteries must be removed from the Universal Remote.
• Press and hold the “1” icon on your universal remote.
• Turn on your television and replace the batteries in the universal remote.
• Aim the remote at the TV device and press and hold the TV device button until the led light begins to flicker.
• This phase requires pressing and holding the TV button on your remote while entering your TV’s programming code.
• Selecting the Power button on the remote lets you confirm that the Emerson TV Universal Remote is correctly programmed with your device.

PROGRAMMING REMINDERS AND HINTS

There are several causes why the codes do not function. However, it is customary to fail on the initial attempt. This is the primary reason why multiple codes are provided, so you can try another one if the first one doesn’t work. 

This may take up a few minutes of your time since there’s a possibility that you need to repeat the steps. 

Another factor would be that your remote has deteriorating batteries, which causes the remote not to function well and prevents them from obeying the commands. 

Always use fresh batteries. Lastly, some objects might obstruct your TV, so it can’t detect any command from the remote. To see that there are no obstructing objects in front of your device. 

FREQUENTLY ASKED QUESTIONS

How do I discover the code for my TV remote?

The simplest method for locating a TV remote code is to consult the product documentation. Refrain from losing the paper manually. Instead, you can glance at your TV’s rear panel and note the model and serial number.

How do I program my universal remote to my TV without the code?

To program your universal remote without a code, simultaneously hold down the SET and Zero (0) controls on your universal remote. This phase is crucial, and this part is where most people fail. The LED light indicator (typically red) will then illuminate steadily.

How can I tell whether a universal remote will function with my television?

If your smart TV has an Infrared sensor (or whatever connection type your remote employs, such as Bluetooth or Wi-Fi), your universal remote should function with it. However, some universal remotes will only operate your television’s power, volume, and channel up/down controls.

How can I tell whether a universal remote will function with my television?

If your smart TV has an Infrared sensor (or whatever connection type your remote employs, such as Bluetooth or Wi-Fi), your universal remote should function with it. However, some universal remotes will only operate your television’s power, volume, and channel up/down controls.