Sharp TV Universal Remote Codes Programming (Guide)

The Sharp universal remote operates as a code, similar to most universal remotes on the market. The Sharp-compatible universal remote does not require programming to communicate to Sharp Aquos televisions or other Sharp devices. 

The Sharp universal remote can also control other devices, eliminating the need for a separate remote. Before deploying universal codes to a Sharp television, following the programming procedures outlined below is necessary. Use the crisp TV codes if possible.

SHARP TELEVISION CODES FOR UNIVERSAL REMOTE

Check the table below for Sharp TV remote configuration codes for the Universal Remote based on the model of the device. Here you can discover the appropriate two, three, or four-digit codes for programming your Sharp TV universal remote.

GE UNIVERSAL REMOTE CODES FOR SHARP TV

0004	0122
0079	0095
0020	0009
0266	0123
0226	0063
0006	—

SHARP TV CODES FOR XFINITY

11801	10078
12049	11407
11089	10165
10032	10491
12285	10854
12286	11670
10093	10153
10178	11602
12434	10036
11756	13867
10706	12360
10386	10851
12183	12284
10885

COMCAST 5 DIGIT REMOTE CODES FOR SHARP TV

10165

10093

SHARP TV CODE FOR ONE FOR ALL REMOTE

0266	0122
0004	0020
0226	0006
0095	0009
0079	0063

SPECTRUM REMOTE CONTROL CODES FOR SHARP TV

10851	11602
10093	12360
10688	11756
10818	—

SHARP TV CODES FOR XFINITY REMOTE

10165

10093

RCA UNIVERSAL REMOTE CONTROL CODES FOR SHARP TV

1173	1122
1265	1196
1372	1357
1423	1171
1437	1261
1006	1004
1095	1111
1447	1029
1012	1026
1443	1112
1113

WHAT IS THE 5-DIGIT CODE FOR SHARP TV

10171	11963
11641	11326
11892	11517
10748	11660
10463	10171
11463	11204
11314	12002
11785	11326
11963	11204
11710	11780
10178	11517
11641	12183
11780	12002
10019	11564
10748	11314
11660	12049

RCA UNIVERSAL REMOTE CODES FOR SHARP TV

1095	1029
1423	1004
1372	1026
1122	1173
1171	1265
1261	1196
1112	1113
1357	1006
1447	1437
1012	1443

DIRECTV REMOTE CODE FOR SHARP ROKU TV

11756

10818

4-DIGIT CODE FOR SHARP TV

1064	1097
1078	1362
1099	1312
1378	0039
0386	1009
1004	0165
0093	1011
1153	1077
1375	1025
1311	1298
1274	1081

DISH NETWORK SHARP TV CODES

0178	0688
4618	4507
2049	2183
3183	4740
4398	1756
2360	0885
2434	0689
0093	0706
3519	3394
0818	4121
4892	0851
0491	1602

DISH REMOTE CONTROL CODES FOR SHARP TV

3519	0851
2360	4121
4398	0706
0885	0689
0093	4507
1602	4618
0178	2434
2049	3183
2183	0818
0688	4892
3394	1756
0491	4740

PHILIPS UNIVERSAL REMOTE CODES FOR SHARP TV

0224	0002
0913	0907
0813	0509
0202	0603
0111	0228

MAGNAVOX UNIVERSAL REMOTE CODES FOR SHARP TV

0058	0040
0034	0028

SHARP TV CODES FOR SPECTRUM REMOTE

11602	10818
12360	10093
10688	11756

DIRECT TV REMOTE CODE FOR SHARP TV

10818	10689
10688	10093
10851

ONN UNIVERSAL REMOTE CODES FOR SHARP TV

5074	5028
5010	5065
5045

SHARP TV CODES FOR DIRECTV REMOTE

10688	10818
10689	10093
10851	—

3 DIGIT SHARP TV REMOTE SETUP CODES

502

918

014

002

013

509

111

5 DIGIT SHARP TV PROGRAMMING CODES

10463
11641
12183
11314
10171
11314
10019
10178
11564
11641
11892
11517
11463
10171
11326

To begin programming your devices with a single remote, ensure that the devices and the remote’s batteries are operational. This will eliminate complications during remote setup.

HOW TO PROGRAM A SINGLE UNIVERSAL REMOTE WITHOUT CODING?

With the auto-search technique, all one for all universal codes is scanned within the remote. Then, it analyzes a single code to identify the correct remote code that will function with your remote to configure the remote control. Follow the below steps:

• Turn on the smart device, such as a television, that you wish to use as a universal remote.
• To “power on” the remote, hold the device button (TV DVD, CBL, OK/SEL) for three seconds. The LED indicator will illuminate when the device is ready for programming.
• Point the remote at the device and press the “CH+” and “CH+” buttons. The remote displays off-and-on signals. Press the “up” or “down” button repeatedly to switch off the device.
•  To verify the code, select the “power” key. The device will be activated. Change the Channel to confirm that the remote has been programmed adequately if the television turns on.  
• The code is saved by tapping the “device” icon. The device’s LED will flash twice to validate the saved code.

HOW TO MANUALLY CONFIGURE A UNIVERSAL REMOTE CONTROLLING MULTIPLE DEVICES?

Using the keycode, it is simple to construct a universal remote, and the keycode will identify the device’s manufacturer and model.

• Initially, you must “Turn on the device.”
• Select “TV” on the “One For All” ubiquitous remote control.  
• Then, click and hold the “Setup” button on the universal remote until it displays “Light Flash” (This indicates that the remote is in “Learning mode”).
• Enter the “Keycode” you extracted from the table above.
• After the procedure, “point the remote at the television” and “press the Power” button.
• The “Power Button” can be released when the screen is off.

Using this universal remote, your television will now function flawlessly. If your device is malfunctioning, repeat the same procedure using a different code from the same section of the referenced table.

HOW TO PROGRAM UNIVERSAL REMOTE CONTROLS USING CODE SEARCH?

If you cannot find the code that works on the device, you can place your universal remote in search mode to find the correct one. This is a manual code that activates the remote’s search mode.

• First, “Power On The Device.”
• Then select and maintain the “Setup” button.  
• You must input the three-digit “9-9-1” code.
• Then, press and hold the power button on the remote control. Then, select Channel up until the television “turns off.”  

The preceding procedure may be time-consuming, but it is essential to identify your code. After completing the steps above, your remote should function properly.

DISABLE THE SHARP UNIVERSAL REMOTE CODES

If you are considering a new entertainment configuration and wish to disable the codes from one of your devices controlled by “sharp tv remote codes,” follow these simple steps:

• Remove the batteries from the compartment on the rear of the remote control. Two or four AAA batteries propel most universal remotes for sharp televisions.
• Vacant the battery compartment for approximately two minutes. While the batteries are being replaced, the “sharp tv remote” capacitor reserves power and maintains the memory. A minimum of two minutes will cause the stored energy to deplete.
• By holding the facility button, you can force the remote to release all the facilities in the capacitor.
• Continue pressing the facility icon to ensure no approaching signal fire. Once the capacitor is depleted, all stored codes for device operation will be erased.
• Substitute new batteries.
• Repeat the Sharp remote protocols for each desired device controlled by the Sharp universal remote.
• The “universal remote for sharp television” is user-friendly and potent enough to control all the room’s entertainment devices. You can enjoy and conveniently control your device when universal remote codes are correctly programmed.

CONCLUSION

This guide should have helped you locate the Sharp TV universal remote codes and programming guide. With these credentials, you can easily control your TV and access all its features and functions. If you have any questions or concerns, please let us know in the section below, and we will gladly assist you.

FREQUENTLY ASKED QUESTIONS

How do I discover the code for my TV remote?

The simplest method for locating a TV remote code is to consult the product documentation. Refrain from losing the paper manually. You can locate the model and serial number on the back of your television.

Are Sharp remote controls universal?

One For All’s extensive selection of replacement remotes includes Sharp TV remotes compatible with all Sharp (IR) TV models. Therefore, whether you own a Sharp LCD, LED, or Plasma television, our replacement remotes are compatible with all of them!

How do I reconfigure the remote for my Sharp LCD TV?

If the remote control still does not function, remove the batteries to recalibrate it. Then, for 30 seconds, tap and hold the POWER BUTTON. Next, insert new batteries and press the TV and POWER buttons to activate the television.

How can a TV remote be programmed without a code?

To program your universal remote without a code, you must: Hold down the SET and Zero (0) controls simultaneously four times on your universal remote. This is a crucial stage where the majority of people fail. The LED light indicator (typically red) will then illuminate steadily.