Fix samsung tv wont connect to wifi? [Troubleshooting Guide]

At one point or the other, people, both young and old, encounter WiFi connection issues on their Samsung TV. As a number one source of entertainment, streaming your favorite content can be a real downer when technical issues like these arise. It’s important to understand that this common technology snag could be due to several reasons – from incorrect network settings to outdated firmware on your device.

So, you need not fret. Our easy-to-follow guide is here to assist you – packed with features that will help unravel and ways to fix any hitches that might impede your viewing experience.

samsung tv wont connect to wifi

samsung tv wont connect to wifi? Ready to reconnect, pop some popcorn and enjoy uninterrupted viewing on your television? Let’s dive in and address these WiFi connection problems, one by one!

Incorrect network settings and weak Wi-Fi signal are very common causes of these Wi-Fi connection issues on Samsung TV. Outdated firmware, router compatibility issues, and incorrect DNS settings can also contribute to connectivity problems. For example, having issues with your router’s compatibility with your Samsung TV, can lead to a poor connection between the devices. This in turn can cause the television to disconnect intermittently, affecting your account with your favorite streaming service.

samsung tv wont connect to wifi

Incorrect network settings on your Samsung TV can often result in WiFi connectivity issues. Computers and other internet-dependent devices face similar problems as well. It’s pretty common to mistakenly enter wrong details when setting up your Internet connection. This could be an incorrect password, or faulty IP address configurations.

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)

Just navigate to “Settings”, then select “General” followed by “Network” on your TV remote for reviewing these settings, just like you often would with your computer. Be sure that you’ve correctly entered the WiFi password and the IP address configurations are properly set – this is a crucial aspect for maintaining persistent network connections.

Key Takeaways to reset samsung tv not connecting

  • Incorrect network settingsweak Wi-Fi signaloutdated firmwarerouter compatibility issues, and incorrect DNS settings are common causes of Wi-Fi connection issues on Samsung TV.
  • Troubleshooting steps include restarting the TVresetting network settings, checking and updating firmware, resetting the router, improving Wi-Fi signal strength, configuring DNS settings, and ensuring network compatibility.
  • Improving Wi – Fi signal strength by repositioning the router, removing interference, using extenders/boosters, changing the channel, reducing network traffic can help resolve connection issues.
  • Configuring DNS settings and keeping the router’s firmware up to date are important for optimal performance.

This simple check/rectification process might just solve your Samsung TV’s WiFi problems in no time!

Weak Wi-Fi signal is a common culprit behind Samsung TV’s WiFi connection issues. A weak signal can result in slow or intermittent connectivity, making it frustrating to stream your favorite shows or movies from various products and platforms.

Common Causes and fix on tv not connecting to wifi

There are a few things you can do to improve the Wi-Fi signal strength to connect samsung tv.

image 59

Incorrect network settings

First, ensure that your router is placed in an optimal location, away from obstacles like walls or appliances that may interfere with the signal. You can also try repositioning your router antennas to maximize coverage.

If that doesn’t help, consider using a Wi-Fi range extender or mesh network system to expand and strengthen the coverage in your home. These devices work by amplifying and extending the reach of your existing Wi-Fi network.

Another option is to connect your Samsung TV directly to the router using an Ethernet cable. This eliminates any issues related to wireless network signal strength but requires running a cable from the router to your TV.

Weak Wi-Fi signal

Updating the firmware on your Samsung TV is an important step towards resolving WiFi connection issues. Outdated firmware can cause compatibility problems with your router or result in potential bugs that disrupt the device’s ability to connect to the internet.

By updating your firmware, you ensure that your TV has the latest software enhancements and bug fixes, improving its overall performance and WiFi connectivity. Keep in mind that updating the firmware requires a stable internet connection and may involve following specific instructions provided by Samsung.

Router compatibility can play a significant role in causing Wi-Fi connection issues on Samsung TV. It’s crucial to ensure that your router supports the necessary wireless connection protocols and bands required by your Samsung TV for a seamless and reliable connection.

Checking the compatibility of your router with your Samsung TV’s network requirements is an important troubleshooting step when experiencing Wi-Fi problems.

Incorrect DNS settings can often be the culprit behind WiFi connection issues on Samsung TV. The Domain Name System (DNS) is responsible for translating domain names into IP addresses, allowing your TV to connect to websites and services on the internet.

Outdated firmware

When the DNS settings are incorrect, your Samsung TV may not be able to access the internet properly, causing WiFi problems. To resolve this issue, you can navigate to the network settings on your TV and manually enter the correct DNS server addresses provided by your Internet Service Provider (ISP).

By ensuring that the DNS settings are accurate, you can effectively troubleshoot and fix WiFi connectivity problems on your Samsung TV.

Router compatibility issues

To resolve Samsung TV’s Wi-Fi connection issues, follow these troubleshooting steps for quick fixes: restart the TV, reset network settings, check and update firmware, reset the router, improve Wi-Fi signal strength, configure DNS settings, and ensure network compatibility.

Is your Samsung TV or perhaps even your smart TV, laptop, or phone experiencing WiFi connection issues? Don’t worry; speed and a steady amount of patience are key to resolving this. You can try restarting the TV to quickly assess and hopefully resolve this problem. This common case even happens in business settings where Wi-Fi is crucial. Here’s how:

In some rare situations, especially with older models, it might be worthwhile to check the WiFi ports on your devices. Sometimes, physical connections can impact your device’s WiFi capabilities.

Incorrect DNS settings

Did you know? Connectivity problems wont only affect your TV; they can also impact other smart devices connected to the same network. Just like your smart TV, these devices might also benefit from quick troubleshooting.

image 60

If your TV is still not connecting, don’t worry. There are plenty of potential benefits to troubleshooting, even if it doesn’t seem like it at first. Persistence is key, so let’s continue with the next steps.

Don’t lose hope if the TV isn’t responding as anticipated. In any case, there’s always another step to try.

Troubleshooting Steps for Resolving Samsung TV’s wifi issue

To resolve WiFi connection issues on your Samsung TV, you can try resetting the network settings, much like you would do on a laptop or phone suffering from similar issues. Follow these steps:

Restart the Samsung TV

While you are navigating the system of your smart tv, it’s advisable to monitor the amount of network traffic on your device. High traffic may slow down your speed and impact WiFi connections.

Being patient with the process and taking note of any changes in your device’s behavior will be beneficial. Troubleshooting is a process, and your keen observation will pay off.

Don’t forget to check on your other devices as well, like your laptop or phone. The issue might be affecting them too.

  1. Unplug the power cord from the Samsung TV.
  2. Wait for a full 60 seconds before plugging it back in.
  3. Once the TV is plugged back in, press the power button on the remote or directly on the TV itself.

Remember, you’re not alone in this. Many users have faced the same issues, and like them, you will navigate your way through this as well.

To resolve Samsung TV’s WiFi connection issues, it’s important to check and update the firmware version – something that’s enormously beneficial for all smart TVs, laptops, and phones as well. Follow these steps:

Reset network settings on the TV

In most cases, updating your firmware should significantly speed up your device and potentially solve any WiFi problems you’re facing.

Sometimes, updating firmware can take a certain amount of time. But remember, the potential benefits are worth the wait.

Navigate your way through the settings just like you would when updating applications on your phone or laptop.

  1. Press the Menu button on your TV remote.
  2. Navigate to Settings and select General.
  3. Scroll down and select Network.
  4. Choose Network Status.
  5. Select IP Settings.
  6. If the IP settings are set to Manual, change it to Auto. This will allow your TV to automatically obtain an IP address.

If the problem still exists even after the proposed solutions, be reminded that many business WiFi networks have additional security features that might be affecting your connection.

To resolve WiFi connection issues on your Samsung TV, try resetting the router. Seemingly like your phone or laptop, this action could aid in refreshing the network settings and potentially fix any connectivity problems. Here are the steps to follow:

Check and update firmware version

In the case that resetting the router does not help, remember that there are still several steps to take. This wont break your progress so far, and you’re already much closer to the solution.

The speed of your internet connection can also affect your TV’s ability to connect especially in a business setting with multiple devices using WiFi. Always check your connection speed as part of your troubleshooting steps.

image 57

Attention to the amount of bandwidth being used by other devices in your network can also have an impact. Make sure you take into account all connected devices when trying to resolve connection issues.

  1. Go to the TV’s home screen by pressing the home button on the remote.
  2. Using the arrow keys on the remote, navigate to “Settings” and press enter.
  3. Select “Support” from the menu options.
  4. Choose “Software Update” and press enter.
  5. Select “Update Now” and wait for the TV to search for available updates.
  6. If there is an update available, follow the prompts to download and install it.
  7. Once the update is complete, restart the TV and check if the WiFi connection has improved.

This solution might be particularly beneficial if you’re attempting to connect multiple devices, like your laptop or phone, to the same router. Refreshing the network connection can help all devices establish a stable connection.

To improve Wi-Fi signal strength on your Samsung TV and potentially resolve connection issues, follow these steps:

Reset the router

In this case, these steps will be beneficial not just for your Samsung TV but even for other smart devices like a laptop or phone struggling with Wi-Fi issues.

If you’re using your smart tv in a business setting, these steps can also help improve the speed and stability of your overall network connection, which can improve productivity.

Remember, connection issues don’t just occur with your smart tv. Your phone and laptop could also have similar problems, and these steps could potentially resolve them as well.

  1. Unplug the power cable from both your router and modem.
  2. Wait for about 30 seconds to 1 minute.
  3. Plug the power cable back into the modem and wait for it to fully boot up.
  4. Once the modem is online, plug the power cable back into the router and wait for it to fully boot up as well.
  5. On your Samsung TV remote, press the Menu button.
  6. Navigate to Settings and select General > Network.
  7. Choose Network Status or Test Connection to check if your TV is now successfully connected to WiFi.

Paying attention to the amount of data being used by your other devices and apps could have a tremendous effect on the overall connection of your smart tv.

Configuring DNS settings can help resolve WiFi connection issues on your Samsung TV. But this can be beneficial for other devices such as your laptop or phone as well. Follow these steps to configure DNS settings:

Improve Wi-Fi signal strength

In the case of a smart tv in a business setting, configuring DNS might be particularly beneficial. A reliable, fast connection is essential for effective communication and productivity.

Don’t forget to troubleshoot your other devices as well. Your laptop and phone use the same network, so ensuring all settings are correct can be advantageous and will boost the speed of connectivity.

Make sure to keep an eye on the number of devices connected to your WiFi. The greater the amount of devices connected might effect the connectivity speed.

  1. Re-position your router: Ensure that your router is in a central location in your home, away from obstructions such as walls and large furniture. This will help the Wi-Fi signal reach your TV more effectively.
  2. Remove interference: Keep other electronic devices, such as cordless phones and microwaves, away from your router and TV. These devices can interfere with the Wi-Fi signal.
  3. Use a Wi-Fi extender or booster: If your router is far from your TV or you have a large home, consider using a Wi-Fi extender or booster to amplify the signal to reach your TV.
  4. Change the channel: Switching to a less congested Wi-Fi channel can help improve signal strength on your Samsung TV. You can access this setting on your router’s configuration page.
  5. Reduce network traffic: Disconnect any unnecessary devices from your Wi-Fi network, especially those that are using bandwidth-intensive applications or streaming services. This will free up more bandwidth for your Samsung TV.
  6. Upgrade your router’s firmware: Check if there are any firmware updates available for your router and install them if necessary. The latest firmware can often improve overall performance, including Wi-Fi signal strength.
  • Checking and improving the Wi – Fi signal strength can be crucial in resolving Samsung TV’s WiFi connection issues.
  • Repositioning the router, removing interference, and using extenders/boosters are effective ways to enhance the Wi-Fi signal strength.
  • Changing the channel and reducing network traffic can also contribute to an improved connection.
  • Keeping the firmware of the router up to date is important for optimal performance.
  • By following these steps, users can potentially fix their Samsung TV’s WiFi connection issues and enjoy uninterrupted streaming.

Every step you take brings you closer to resolving the issue, so keep going. Soon enough, you’ll be enjoying all the benefits of a stable connection on your smart TV.

To ensure a successful WiFi connection on your Samsung TV, it is crucial to check network compatibility. This principle also applies to integrating a business laptop or phone to your WiFi network; here are some important steps to follow:

Configure DNS settings

In this case, network compatibility checks are equally beneficial for other devices. Apply the same principles to ensure your phone or laptop can connect smoothly to the network too.

If you’re setting up WiFi for a business, ensuring network compatibility can significantly speed up setup and reduce headaches connected with troubleshooting.

Taking into account the amount of bandwidth that’s being used by different devices on the network is also important. Too many devices connected at once can slow down the network speed.

  1. Press the Menu button on your TV remote.
  2. Navigate to Settings and select General > Network.
  3. Select the network you are currently connected to.
  4. Choose IP settings and select DNS mode.
  5. Change the DNS mode from Automatic to Manual.
  6. Enter the preferred DNS server address provided by your Internet Service Provider (ISP). Alternatively, you can use public DNS servers like Google’s Public DNS ( or Cloudflare’s
  7. Confirm the changes and exit the settings menu.

No matter the issue or the device, there is always a solution. Whether it’s a smart tv, laptop, phone, or other devices, we’ve got you covered.

In addition to the troubleshooting steps mentioned above, there are some additional tips and tricks that can help resolve Wi-Fi connection issues on your Samsung TV. Discover these expert solutions for a seamless streaming experience, whether you’re using your phone, laptop, or smart TV.

Check network compatibility

To further troubleshoot and resolve WiFi connection issues on your Samsung TV, you can try resetting the Smart Hub. Similar to how you would perform a reset on your phone or laptop, this step will clear any glitches or conflicts within the TV’s system that may be affecting the WiFi connectivity. It’s a beneficial step that most users wont commonly consider. Here’s how:

The benefits of resetting can be significant. This process can help speed up performance, not just for your smart TV, but for any device connected to the same network.

Never forget the importance of patience in this process. It might take a certain amount of time, but the improved WiFi connection will be worth it.

  1. Verify router compatibility: Make sure that your router supports the required WiFi protocols (such as 802.11n or 802.11ac) for connecting with your Samsung TV. Check the router’s specifications or consult the manufacturer’s website for compatibility information.
  2. Dual-band support: If you have a dual-band router (2.4 GHz and 5 GHz), ensure that both frequencies are enabled and broadcasting separately. Some older Samsung TV may only connect to the 2.4 GHz band, so it is important to have it available.
  3. Channel interference: Check for any channel interference from nearby devices that may be using the same WiFi channel as your Samsung TV. This can cause signal disruption and result in connectivity issues. Use a wireless analyzer app or access your router’s settings to manually select a less congested channel.
  4. MAC address filtering: Some routers offer MAC address filtering, which allows you to specify which devices can connect to your network based on their unique MAC addresses. Ensure that the MAC address of your Samsung TV is added to the allowed list if this feature is enabled.
  5. Wireless security type: Confirm that your WiFi network is utilizing a compatible security protocol, such as WPA2-PSK (AES). Older security types like WEP or TKIP may not work with all Samsung TV.

Port connectivity issues can also occur. So, be sure to check them, especially in a business setting where multiple devices are typically connected to the same network.

Keep pressing onward, your persistence will eventually pay off, reconnecting your devices back to the speed they deserve.

Additional Tips and Tricks for Resolving internet connection issues 

To perform a hard reboot on your Samsung TV, much like you would with a stubborn phone or laptop, follow these steps:

Reset the Smart Hub

Hard reboot can be beneficial for a multitude of devices from phones to laptops, and even in the case of business settings where the speed of the device can significantly impact productivity.

Wait for a few minutes before turning the device back on. The surprise benefits of waiting for just a few minutes can often solve minor issues that are causing major problems.

Be mindful of any changes in the device’s behavior after the reboot. Keeping track of these changes will be beneficial when diagnosing the root cause of the problem.

  1. On your Samsung TV remote, press the Home button to open the Smart Hub menu.
  2. Navigate to “Settings” using the directional buttons and select it by pressing the Enter key.
  3. Scroll down and select “Support” from the list of options.
  4. In the Support menu, choose “Self Diagnosis.”
  5. Now, select “Reset Smart Hub” and enter your PIN if prompted.
  6. Confirm your selection by selecting “Yes” when prompted.

Always remember, every case is unique. While this may be a typical step, its impact can differ depending on your device’s specifications and the amount of usage it experiences.

If all else fails and you’re still experiencing WiFi connection issues on your Samsung TV, you can try performing a factory reset as a last resort. Just as you would with an unresponsive phone or laptop, keep in mind that this will erase all personalized settings, installed apps, and saved data on the TV. So, in any case, make sure to back up anything important before proceeding.

Perform a hard reboot

In conclusion, troubleshooting WiFi connection issues on your Samsung TV can be a simple and quick process with the right steps — proving quite beneficial for the smooth operating of your smart devices like TV, laptop, or phone. Remember the crucial steps; restarting the TV, resetting network settings, updating firmware, and contacting support if necessary. All these will help to speed up the resolution of common WiFi problems.

With just a few minutes of your time, you’ll be back to enjoying seamless internet connectivity on your Samsung TV. Think of it as a small investment for the enormous benefits and the speed it will provide to your online activities. Don’t let WiFi troubles hold you back from watching your favorite shows and movies – use these tips to get connected again in no time!

There could be several reasons why your Samsung TV is not connecting to WiFi. It could be due to an incorrect WiFi password, a weak or unstable WiFi signal, interference from nearby electronic devices, outdated software on the TV, or an issue with the network settings on the TV. Bear in mind that these same issues could potentially affect your laptop and phone as well.

  1. Unplug the power cord from the back of the TV.
  2. Wait for at least 30 seconds before proceeding.
  3. While the TV is unplugged, press and hold the power button on the TV for about 30 seconds.
  4. Release the power button and plug the power cord back into the TV.
  5. Wait for the TV to fully power up, which may take a few minutes.

To troubleshoot WiFi connection issues on your Samsung TV, you can

Perform a factory reset (as a last resort)

If all else fails and you’re still experiencing WiFi connection issues on your samsung smart tv, you can try performing a factory reset as a last resort. Keep in mind that this will erase all personalized settings, installed apps, and saved data on the TV, so make sure to back up anything important before proceeding.

  1. Press the Home button on your TV remote to open the main menu.
  2. Navigate to Settings and select it.
  3. Scroll down and select Support.
  4. Choose Self Diagnosis from the list of options.
  5. Select Reset.
  6. Enter your PIN (if prompted) or follow any additional on – screen instructions.

Conclusion on connect to wi-fi

In conclusion, troubleshooting WiFi connection issues on your Samsung TV can be a simple process with the right steps. By following the recommended troubleshooting guide and performing quick fixes such as restarting the TV or resetting the network settings, you can easily resolve common WiFi problems.

With just a few minutes of your time, you’ll be back to enjoying seamless internet connectivity on your Samsung TV. Don’t let WiFi troubles hold you back from watching your favorite shows and movies – use these tips to get connected again in no time!

FAQs about samsung tv wifi issues

1. Why is my Samsung TV not connecting to WiFi?

There could be several reasons why your Samsung TV is not connecting to WiFi. It could be due to an incorrect WiFi password, a weak or unstable WiFi , interference from nearby electronic devices, outdated software on the TV, or an issue with the network settings on the tv not connecting to wi-fi.

2. How can I troubleshoot the WiFi connection issues on my Samsung TV?

To troubleshoot WiFi connection issues on your Samsung TV, you can try resetting your modem and router, ensuring that the WiFi strength is strong near the TV, checking for any firmware updates for your TV, making sure that the correct WiFi password is entered correctly on the TV, and adjusting any network settings if necessary.

3. Is there a way to improve my Samsung TV’s WiFi connectivity?

Yes, there are several steps you can take to improve your Samsung TV’s WiFi connectivity. You can move your router closer to the TV or use a wireless range extender to enhance coverage in that area. Additionally, reducing interference from other devices and minimizing obstructions between the router and the TV can also help improve connectivity.

4. Should I contact customer support if I am unable to resolve my Samsung TVs’ WiFi connection issues?

If you have tried troubleshooting steps but are still unable to resolve your Samsung TVs WiFi connection issues, it may be beneficial to contact customer support for further assistance. They will be able to provide specific guidance based on your specific model and assist you in resolving any persistent problems with connecting your TV to Wi-Fi networks on samsung tv to wifi.

CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts