LG TV Remote won’t Pair (Won’t Register/Not Working/Keeps Disconnecting)
An LG TV can be controlled by either its own remote or another universal remote. You won’t be able to operate your TV if the pairing process fails or the remote isn’t working, regardless of which remote you use. This article will walk you through the process of pairing your LG Magic Remote to your TV and what to do if it doesn’t work.

If the LG Magic Remote is not properly paired, has old batteries, a disrupted IR signal, or is too far away from the TV, it may not work. If the remote still does not work after being reset and re-paired, and all other problems have been resolved, it may be defective and need to be replaced.
This guide will show you how to properly pair and reset your Magic Remote. I’ll also go over how to pair your DirecTV and Xfinity remotes and how to troubleshoot your remote.
Troubleshooting: Issues on LG TV Remote won’t Pair
| Issue | Solution |
|---|---|
| Dead batteries | Make sure that the batteries in your LG TV remote are not dead. You can check the batteries by looking for the low battery indicator on the remote. If the indicator is on, replace the batteries. |
| Incorrect pairing mode | Make sure that your LG TV remote is in pairing mode. You can put the remote in pairing mode by pressing and holding the Home and Back buttons at the same time for 5 seconds. The LED on the remote will start to blink rapidly when it is in pairing mode. |
| Interference | Make sure that there is no interference between your LG TV remote and the TV. If there are other devices nearby that are using the same frequency as the remote, it may prevent the remote from pairing. You can try moving the remote away from other devices or changing the channel on your TV. |
| Hardware issue | If you have tried all of the above solutions and your LG TV remote still won’t pair, it may be a hardware issue. In this case, you will need to contact LG customer support for assistance. |
| Software issue | In some cases, a software issue may prevent your LG TV remote from pairing. If you are experiencing this issue, you can try updating the firmware on your TV. You can download the firmware update from the LG website and then follow the instructions to install it. |
Video: How To Fix an LG Remote Control That’s Not Working
What is the Magic Remote for LG Smart TV?
A Magic Remote for the LG Smart TV is a trackball-equipped remote. This feature allows you to move a cursor on the TV screen in the same way that a computer mouse would. It also has all of the standard buttons that you’d expect to find on a remote.
It can also function as a universal remote, allowing you to control your TV as well as other devices with a single remote.
Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)
LG TV Troubleshooting Magic Remote?
You should start by checking the TV’s volume and audio settings. If it doesn’t work, try swapping out your HDMI cable or audio output port and resetting the connection. Contact LG’s support team for help if you’ve exhausted all other options.
How to Pair a Remote Control to an LG TV
Each remote has a unique pairing procedure. The Magic Remote is the standard remote for an LG TV. As a result, follow the steps below to connect the Magic Remote to your TV.
- Step 1: Turn off the TV and remove the batteries from the Magic Remote.
- Step 2: Turn on the television.
- Step 3: Insert the Magic Remote’s batteries.
- Step 4: Aim the remote at the TV (closely) and press the ‘Ok’ button (the center scroll button).
- Step 5: Press and hold the ‘Ok’ button until a message on the TV indicates that the pairing was successful.
How to Sync Your LG Magic Remote to Your TV
The terms ‘syncing’ and ‘pairing’ refer to the same process. You can sync your Magic Remote to your LG TV by following the steps above.

How to Reset the LG TV Remote Control
By pressing and holding down the ‘Home’ and ‘Back’ buttons on the remote, the LG Magic Remote can be easily reset. Hold these for about 5 seconds, or until the power button at the top of the remote begins to flash.
You will then need to pair the remote control again, as described above.
Some newer models can reset and pair the Magic Remote with the press of a single button. Try holding down the ‘Exit’ button for 5 seconds. If nothing happens after 30 seconds, try using the ‘Guide’ button.
LG Smart TV Magic Remote Fails to Register
Your Magic Remote may not be registering for several reasons:
- Batteries need to be replaced.
- IR signal is blocked
- Remote is defective
It’s also possible that the buttons you’re pressing aren’t working, or that you need to shake the remote.
Buttons that are faulty or damaged
Buttons can accumulate debris beneath the pads and fail to register when pressed. You might be able to dislodge the debris by removing the remote’s batteries and repeatedly pressing each button.
If this does not work after you replace the batteries, the buttons may be broken. You will need a new remote in this case.
Check to see if an IR signal is being emitted from the remote because there should be no signal if the button is broken. However, you will notice a signal from other buttons.
LG Smart TV Magic Remote Does Not Work
If your remote isn’t working, you shouldn’t be able to see any IR signals from it through your camera. Furthermore, when you shake the remote, the cursor does not appear on the TV.

If this is the case, try the following solutions, which were all explained above.
- Change the batteries.
- Un-pair and re-register the remote control with the TV.
- Unplug the TV and remove the remote batteries for 60 seconds.
LG TV Magic Remote Keeps Disconnecting
There are several possible causes for your Magic Remote to keep disconnecting.
Distance from the television
First, ensure that you are close enough to the television for it to register the remote. If you are on the very edge of the remote’s range, the signal will occasionally drop out.
Low Battery Life
If your batteries are still charged but running low, you may notice that your remote works intermittently. This is easily remedied by simply replacing the batteries.
If this is not the case, proceed with the procedures outlined above.
- Un-pair and re-register the remote with the TV.
- Turn off the TV and remove the remote’s batteries for 60 seconds.
- Contact LG regarding the faulty remote.
LG TV Remote Is Not Supported
This appears to be a problem with the remote. If none of the above solutions work, contact LG and request a replacement remote.

DirecTV Remote Does Not Work with LG TV
All of the issues mentioned above, such as changing batteries and clearing the IR pathway, can be applied to various remotes. The main distinction is the pairing procedure, which is frequently what causes the remote to fail.
To connect a DirecTV Remote to an LG TV, enter one of the following codes: 11423, 10178, or 11178.
- Step 1: Turn on the LG television.
- Step 2: Go to Menu > Settings > Remote > Program Remote > Television.
- Step 3: Set the remote’s mode switch to ‘TV.’
- Step 4: Press and hold the ‘Select’ and ‘Mute’ buttons at the same time until the light flashes four times.
- Step 5: Enter one of the above-mentioned codes.
You should then be able to complete the pairing process by following the instructions.
Do you own a different brand of smart tv? Please see our article on Smart TV Remote Not Working to locate your specific TV model.
How to Pair an Xfinity Remote to an LG TV
The only difference between the Xfinity Remote and the other remotes is the pairing process.
Pairing with an Xfinity Remote Setup Button
- Step 1: Turn on your television.
- Step 2: Hold down the ‘Setup’ button until the remote’s light turns green.
- Step 3: Type ‘991’ into the numeric keypad and wait for the green light to flash twice.
- Step 4: Keep pressing ‘Ch’ (slowly) until the TV turns off.
- Step 5: On the remote, press ‘Setup.’
- Step 6: Turn on the TV by pressing the power button.
Pairing Without An Xfinity Remote Setup Button
To pair without a setup button on the remote, first look up your remote’s 5-digit code for your LG TV (there may be more than one). The codes should be available on the Xfinity website.
Follow the steps below once you have the code.
Step 1: Turn on your television.
Step 2: Press and hold the ‘Xfinity’ and ‘Mute’ buttons at the same time until the light on the remote turns green.
Step 3: Enter one of the previously discovered 5-digit codes.
Step 4: Try a different code if the remote flashes red. You have the correct code if it flashes green twice.
Step 5: Turn off the TV using the power button to ensure the remote is paired.
How To Troubleshoot Remote For Att TV Not Working? ( 5 Best Guide )
Final Thoughts
LG Smart TV remotes often do not need to be replaced; they may just require a few minor adjustments to function properly. If the remote isn’t responding, try replacing the batteries, checking the remote’s range and connectivity with the TV, or gently cleaning it with a soft cloth.
FAQs
Why isn’t my LG Magic remote working?
This applies to both Magic and standard remotes. If all of the buttons on the remote control are not working, replace the batteries. Replace the batteries with the + and – ends corresponding to the label inside the compartment. Never combine old or used batteries with new ones.
Why isn’t my LG TV responding to my remote?
If your LG TV is not responding to the remote, replace the batteries. Also, power cycle the remote and the TV to clear out any temporary bugs and glitches. Additionally, check for interference and try updating the TV firmware.
How do I reprogram my LG remote?
To reset the remote control, press and hold the [Back] and [Home] buttons for 5 seconds or more. The power button light will blink three times when the reset is complete.
Why isn’t my television responding to my remote?
Low batteries are usually the cause of a remote control that does not respond or control your TV. Make sure the remote is pointing at the TV. Other electronics, certain types of lighting, or something blocking the TV remote sensor could also be interfering with the signal.
References: