How to Fix Toshiba Fire TV Remote Not Working? (5 Ways!)

The Amazon Fire Stick is one of the world’s most popular streaming platform sticks, with a wide range of users. It is extremely popular and well-known in the community as one of the best ways to easily stream countless channels.

Is your Toshiba Fire TV remote inoperable? Do you want to know how to solve this problem? Don’t worry, we’ll assist you with that as well. In this article, we will demonstrate a few simple and easy procedures for resolving the Toshiba Fire TV remote not working issue.

The Amazon Fire Stick is a popular streaming service that is used by many people. It is essentially well-known and well-liked in the community as the best source for easy streaming of an unlimited number of channels.

A remote control reset will frequently help to get it working again. Remove the batteries, press each button (one at a time), and turn the switches through all positions. Each button should be held down for a total of two seconds. Replace the batteries and begin using the remote control.

After attempting this quick and easy fix, many people were able to resume using their Toshiba TV remote. Other options for resetting or reactivating the remote may also be available.

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)

5 Ways To Fix Toshiba Fire TV Remote Not Working
5 Ways To Fix Toshiba Fire TV Remote Not Working


As it quickly pairs with your existing Insignia or Toshiba Fire TV edition, the Toshiba Fire TV remote is an easy and simple way to replace the missing or damaged Fire TV remote. It retains the full voice control functionality of your original remote control by utilizing both Bluetooth and IR technologies.

Nonetheless, it, like any other device, has some flaws that prevent it from functioning properly. Many users have complained about having problems using the Toshiba Fire TV remote and being unable to stream. See the guide below to learn why your Toshiba Fire TV remote isn’t working.


There are numerous reasons why your fire stick remote may not work.

Low batteries, signal obstruction from the remote, electronics interference, and so on are among the most common problems.

Other reasons are listed below.

  • Battery issues: Of all the possible causes, this is the most serious. Low battery charge, incorrect battery insertion, and other related issues can all cause a fire stick remote to stop working.
  • Wrong Pairing: It is difficult for a remote to work if it is not paired with the fire stick. When replacing a remote, always remember to pair it before using it.
  • Obstructions: A direct line of sight between your remote and the Fire Stick is not required. However, when there is an obstruction, the range can be drastically reduced.
  • Distance: The Fire Stick remote uses Bluetooth rather than infrared. Their theoretical range is about 30 feet, but in practice, it is much lower.
  • Interference: Any device that has the ability to restrict Bluetooth connections can interfere with your remote’s ability to function properly
  • Replacement remotes that are incompatible with your Fire Stick will not work.
  • Damage: Internal faults caused by a failed component or external damage caused by water can both prevent your Fire Stick remote from working.


A number of users have complained about having problems using the Toshiba Fire TV remote. According to these users, their Toshiba Fire TV remote is completely inoperable. As a result, they are unable to stream properly using the device.

This is why, today, we will use this article to find a solution to this article. We will go over a number of troubleshooting steps that should all aid in permanently resolving the issue. All of them are listed directly below:

Alternative Video: Ways To Fix Toshiba Fire TV Remote Not Working

Ways To Fix Toshiba Fire TV Remote Not Working


1. Replacing Batteries

Because batteries are the primary power source for the remote’s operation, they are used in the majority of remotes. Using a remote for an extended period of time, on the other hand, may cause the battery’s juice to run out. When this happens, the remote will stop working automatically.

To resolve this, the user is instructed to replace the remote’s batteries with newer ones. As a result, we recommend that you do the same thing and try replacing the batteries in your remotes. If you don’t know how, you’ll need to remove the back cover of your remote by gently pressing the covers down.

2. Factory Reset the Remote

Another thing you can try to resolve the issue is to factory reset the remote. In case you’re not familiar with what factory resetting entails, it essentially erases all of the settings that your remote has saved.

Instead, all remote settings will be reset to their factory defaults. To successfully factory reset your remote, press and hold the left DPAD-left, back, and menu buttons for approximately 10 seconds.

3. Try Pairing the Remote Again

It’s possible that the problem you’re having is because you haven’t properly paired the remote. All you have to do to correct this is repeat the pairing process.

To pair your remote, press and hold the Home button on your remote for approximately 10 seconds. While you hold down the button, your remote should automatically try to pair with your Fire TV; if it doesn’t, we recommend turning off the TV and remote for a few seconds before trying again.

4. Contacting Support

If you haven’t been able to resolve the problem on your own, you should definitely contact customer service. Any member of the support team should look into your case right away.

You should also receive a list of troubleshooting steps. Following these steps should assist in resolving the problem.

Ways To Fix Toshiba Fire TV Remote Not Working
Ways To Fix Toshiba Fire TV Remote Not Working

5. Get a New Remote

If you still can’t seem to get the remote to work, your final option is to have it replaced. Your remote is most likely beyond repair. If that’s the case, there’s not much you can do about it.

In fact, the only thing you can do is have the remote replaced or purchase a completely newer unit, which should only cost you a few dollars. However, it should be able to solve your problem without any further complications.


There could be a number of reasons why a Toshiba TV is not responding to the remote sensor. Here are a few things to look into:

  • Obstructions – Make sure there is nothing in the way of the remote control and the television’s sensor.
  • Distance – If you move the remote control too far away from the TV, it may not be detected by the sensor. Try it while standing 4 feet away from the TV. If the batteries are weak, they should be replaced.
  • Clean Sensor – It is possible to clean the TV’s sensor. If it has been smudged or is excessively dusty, the signal may be obstructed. Take care not to harm the sensor in the process.

Resetting the Toshiba remote can frequently help to resolve Toshiba TV remote issues. Remove the batteries, then press each button and turn on the switch for two seconds at a time. Change the batteries.


Is your Toshiba Fire TV remote not working? We strongly advise you to follow the five troubleshooting steps outlined in the article. If you discover any problems with the article, please let us know in the comments section below. We will make every effort to contact you as soon as possible.

When your Toshiba Fire TV remote stops working, we recommend following the troubleshooting steps outlined in this article. If you run into any problems, please contact the support team for assistance.

You can also try gently rolling the remote on a hard surface to see if any buttons are stuck. So, we hope the preceding article has helped you understand how to resolve the Toshiba Fire TV remote not working issue.

Fix Toshiba Fire TV Remote Not Working
Fix Toshiba Fire TV Remote Not Working

Frequently Asked Questions

Why is my Fire TV remote not responding?

Batteries: The most common cause of Fire Stick remote failure is a faulty battery. Incorrectly inserted batteries, low battery charge, and other issues can all cause a Fire Stick remote to stop working. Pairing: Your remote will not work unless it is paired with your Fire Stick.

How do I use my Toshiba TV without a remote?

The Toshiba Smart TV can be used without a remote control. You can use universal control to access your television in all of its forms. You can use your smartphone as well. You have so many options that it may be easier not to have a remote at times.

How do I resync My Fire TV remote?

Go to Settings > Controllers & Bluetooth Devices > Amazon Fire TV Remotes > Add New Remote to pair a replacement remote for your Fire Stick. Then, for 10 seconds, hold the home button on your new remote and select the new remote’s name with your old remote to confirm.

Why is the remote control for my Amazon Fire Stick blinking orange?

If your Fire Stick remote is blinking orange, it means it is in discovery mode and is attempting to connect. To resolve this, you must perform a factory reset on your remote by simultaneously pressing the Back, Menu, and Left Navigation Circle buttons for at least 10 seconds.

CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts