How Do I Connect My Xfinity Remote To My TV? (Guide)

Losing your remote control for the television can be annoying. Restarting the setup procedure from scratch can feel like such a headache.

Fortunately, Xfinity remotes aren’t like most remotes. With the help of the online remote code lookup tool, pairing them with your Samsung TV is comparatively simple.

Connect My Xfinity Remote To My TV, open the online code search tool, choose your TV brand and your Xfinity remote’s model, and then complete the setup using the code you are given. This will link your Xfinity remote with your Samsung TV.

The X1, XR11, and XR15 remote controls for your TV are discussed in this article, along with other frequently asked questions concerning Xfinity remotes.

Video: Xfinity X1 Voice Remote Setup (XR15)

AN OVERVIEW OF XFINITY REMOTES

With Xfinity Remotes or a universal remote, you can easily keep an eye on and manage your viewing experience. You may change the language, the volume, the channels, and many other things with only a few easy clicks.

You can receive an Xfinity Remote if you have an Xfinity Internet or Xfinity TV subscription (for the Xfinity Flex 4K streaming device or the Xfinity X1 TV box, respectively).

To further identify the model of your Xfinity Remote, have a peek at the back plate or battery compartment. The most widely used models are the XR2, XR5, XR11, XR15, XR16, and other Xfinity Remotes. Use the voice remotes XR11, XR15, and XR16 to give voice commands.

HOW DO YOU USE YOUR REMOTE?

To start, we need to know if your universal remote control has a setup button.

• XR11, Remote XR5
• An XR2 Remote
• Sterling Remote

CODES FOR XFINITY REMOTE

Before starting with the Xfinity Remote to the Roku TV input sync process, it would be beneficial if you first learned the remote codes.

These codes give the TV system instructions that instruct it to recognize the make and model of the remote, allowing for quicker and more effective programming.

Obtain the codes from https://www.xfinity.com/support/remotes if you don’t already have them.

You may find your model number by selecting the remote control with your Xfinity X1 device. The codes required for Xfinity X1 syncing can be found on the following page.

HOW TO USE THE REMOTE CODE LOOKUP ON XFINITY?

• Go there to access xfinity.com/remotes.
• Click Continue after selecting your xfinity remote codes.
• Choose the type of device you want to control.
• Pick a manufacturer for the gadget.
• Then press Next.
• The following page contains the most likely codes.

If You Don’t Have Your Manufacturer Code:

• Turn on the TV.
• Your remote’s Setup button should be held down all the time.
• If your device lacks a setup button, simultaneously pressing and holding the Xfinity and Info(i) buttons will work.
• The top-mounted LED on the remote will change from red to green.
• Enter 9-9-1.
• The LED needs to flash twice in green.
• Press CH repeatedly to mute the TV code (Channel Up).
• Once the TV has been turned off, press Setup to lock in the code.
• The TV Power button on your remote control should be pressed. If your TV turns on, the remote control has been effectively programmed to control it.

If You Have Your Manufacturer Code:

• Turn on the TV.
• Your remote’s Setup button should be held down all the time.
• If your device lacks a setup button, pressing and holding the Xfinity and Info(i) buttons simultaneously will work.
• The top-mounted LED on the remote will change from red to green.
• Enter the code you found in the previous step using the numeric keypad on your remote.
• Your remote will properly sync when the top LED blinks twice in green.

What Channel Is FS2 On Xfinity? – Detailed Guide [2022]

ONLINE CODE LOOKUP TOOL FOR PROGRAM X1 REMOTE FOR TV AND AUDIO

Your X1 remote can be set up to control both your TV and audio equipment. To accomplish this, you must visit the official Xfinity website and locate the program Xfinity Remote Code Lookup Tool.

Select your remote’s model, then select the following option to get the unique code for your TV (or audio system). Next, press and hold the setup button on remote controls with a setup LED, such as the XR11, until the status LED turns green.

Enter the four or five-digit code you discovered using the remote code search tool once the Comcast Xfinity remote is in setup mode. The configuration will be successful if the status LED flashes twice in color green. Try a different code if the status LED is blinking red, however.

Press and hold the Xfinity and mute buttons simultaneously while the insignia TV is on until the status LED at the top of the slight changes to green on remote controls without a setup button, such as the XR15 voice remote.

When that occurs, enter the four- or five-digit remote code you already discovered. Similar to the XR11, a successful setup is indicated by the status LED flashing green twice.

A red light means that the setup was unsuccessful and that you should attempt a different code.

Pair The XR11 Remote To A TV

Without utilizing the remote code search tool, you can complete the following steps to pair the XR11 remote with your smart TV:

• Turn on your TV.
• The Xfinity TV Box input should now be selected as the TV’s new input.
• Hold the Setup button until the remote’s status LED at the top turns green.
• On the remote, press the Xfinity button. Green will start flashing on the status LED.
• The pairing code, which consists of three digits, must be entered.
• Your TV and your XR11 remote control are now paired.

Pair The XR15 Remote to A TV

Without utilizing the universal remote code search tool, you can complete the following steps to connect the XR15 remote to your TV:

• Turn on your TV.
• The Xfinity TV Box input should now be selected as the TV’s new input.
• As soon as the status LED at the top of the remote turns green, press and hold the Xfinity and info buttons simultaneously for around five seconds.
• The pairing code, which consists of three digits, must be entered.
• Your TV and your XR15 remote control are now linked.
• To set up power, volume, and input control for your TV after the remote and device have been successfully connected, go to the directions on the screen.

TV AND AUDIO RECEIVER CONTROL MUST BE REMOVED

Remove the receiver control for the TV and audio:

• Hold the Setup button on your remote control while waiting for the status LED to become green.
• The code is 9-8-6.
• When the programmed remote has been successfully reset, the status LED at the top of the remote will flash green twice.

Completely reset your Xfinity Remote if this doesn’t work.

PAIR YOUR TV WITH YOUR XFINITY REMOTE

The remote code lookup tool to set up your Xfinity remote makes the procedure quick and easy.

It is significant to remember that each TV remote settings manufacturer offers a variety of remote codes. Therefore, you need not worry if one code fails. Always feel free to try a new code.

If none of the codes seem to work for you, there might have been a setup error, in which case you will need to reset your remote to factory defaults before trying again.

References:

https://www.xfinity.com/support/articles/programming-your-xfinity-remote

https://www.xfinity.com/support/articles/setting-up-the-cable-tv-app

Frequently Asked Questions

Why can’t I pair my Xfinity remote to my TV?

When the light at the top turns green, press and hold the Xfinity and Mute buttons simultaneously for five seconds, enter the first five digits of the TV manufacturer’s code here. The code is accurate if the remote control’s green light blinks twice. The code is incorrect if the remote control light blinks red and green.

How do I pair my Xfinity remote control to my TV?

The Xfinity TV Box input should now be selected as the TV’s new input as soon as the status LED at the top of the remote turns green, press and hold the Xfinity and info buttons simultaneously for around five seconds. The pairing code, which consists of three digits, must be entered. Your TV and your XR15 remote control are now linked.

Can my Xfinity remote control my TV?

Use the Xfinity online lookup tool to program the Xfinity Remote to the TV. Press and hold the setup button on your Xfinity remote control if it has one, then key in the code. You must press and hold the Xfinity and Mute buttons if it doesn’t.

Why is my TV not responding to the remote?

Make sure the remote is directed at the TV. Other equipment, particular types of illumination, or obstructions to the TV remote sensor could also be causing signal interference.