How To Fix Spectrum Router Red Light? [4 Easy Fixes]

People in the United States have been flocking to Spectrum in recent years. And, for the most part, we understand why this trend is gaining traction.

After all, the brand performs admirably in all of the expected areas. Their routers provide an excellent internet connection. They are also very simple to set up and use.

However, we understand that you aren’t here to learn more about the Spectrum brand’s strengths. Inevitably, our readers arrive here because they are having problems with how to fix red light on spectrum router about which we are writing.

How To Fix Red Light On Spectrum Router?
How To Fix Red Light On Spectrum Router?


In this case, we’re dealing with a fairly common problem among Spectrum customers: your router simply refuses to function properly and instead displays a red light.

We understand that this is inconvenient, and that a red light is never a good sign. But don’t get too worked up just yet. The problem is probably not as serious as you thought.

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)

So, to assist you in getting it fixed, we have put together this small troubleshooting guide to assist you in getting it working again.


Any router or modem has several LED indicators that indicate the status of the connection between the networking device or router and the devices that are connected to it. They also show the current state of your internet and WiFi connections.

  • The Spectrum modem and router lights can be blue or red. A solid blue light indicates that the modem/router is operating normally, whereas a blinking blue light indicates that the router is attempting to boot and connect to the internet.
  • When the blue and red lights flash consecutively, it means that the router firmware is being updated, and you should not interrupt the process to avoid causing damage to the device. Instead, wait for the process to finish.
  • The presence of a solid red light on a Spectrum Router indicates that the router is unable to function normally and that there are some critical issues that must be resolved.
  • A Spectrum router blinking red light, on the other hand, indicates that there is a connectivity issue with the router.

However, if you notice other lights blinking in addition to the red light, there may be a problem with your service provider, in which case you should contact your ISP to learn more. Now let’s talk about how to fix Spectrum router flashing red issues.

Spectrum Router
Spectrum Router


If you notice the Spectrum WiFi router’s red light blinking or a solid red light on the Spectrum router, simply follow the steps below to resolve the problem.

Check the red light after each solution to see which one was successful in resolving the problem.

1. Power Cycle The Router And The Modem

Here is how to do it:

  1. Turn off the router and modem and unplug them from the power supply. Remove any batteries you may have;
  2. Wait about two minutes before replacing the batteries. After that, reconnect the modem and turn it on.
  3. Wait for the spectrum modem lights to turn completely blue;
  4. The router should then be reconnected and turned on.
  5. The Spectrum router light should now be blue.
  6. Check to see if the problem has been resolved.

2. Check All The Connections

Check that all of the cables and cords are in good working order. Replace them if they are damaged.

Also, make sure that all of the coaxial and Ethernet cables are securely connected. Disconnect and reconnect all cables to ensure that all connections are secure.

Alternative Video: How to Fix Spectrum Router Red Light

Fix Spectrum Router Red Light Video


  • How To Return Spectrum Equipment?  (4 Easy Steps)
  • What Channel is Fox Sports on Spectrum TV? (Ultimate Guide!)
  • Here How To Fix Fox News Not Working On Spectrum? [6 Easy Ways]

3. Reboot Your Spectrum Modem And Router

In most cases, simply restarting the modem and router will solve the problem. Rebooting can clear out memory and remove any minor bugs that may be causing the connection problem.

To restart a modem-router combination, perform the following steps:

  1. Unplug the modem from the power outlet and remove any batteries;
  1. Wait 1 minute before replacing the batteries and reconnecting the power cable to the modem.
  1. Now, wait a few minutes for the modem to boot up.
  1. When the power is turned on, the Spectrum router should stop blinking red and the lights should gradually return to indicate that it is connected to the internet.

To reboot a standalone router and modem take the following steps:

  1. Remove the modem from the power supply. If your modem has a battery backup, remove the batteries as well.
  1. Remove the Spectrum router’s power cable;
  1. Allow about a minute for the devices to cool down.
  1. Replace the batteries and reconnect the power cables to the modem.
  1. Allow the modem to power up for 2 minutes. The spectrum modem lights will indicate whether or not the power cable is properly connected.
  1. Next, reconnect the router to the power supply and wait a few minutes for it to boot up.
  1. When the display lights turn on, it means that your Spectrum Red Light problem has been resolved.
  1. Check your internet connection now;

4. Reset The Spectrum Router

In most cases, resetting the Spectrum router will resolve the flashing red light or the appearance of a solid red light. Resetting the router restores the router’s settings to their factory defaults.

To reset the router, press and hold the reset button on the router’s/back modem’s for about 20 seconds.

The display lights should turn on after the router reboots and restores the configuration to default mode. Check to see if the red light on the spectrum router is still flashing.

If the Spectrum router red light error persists after resetting the router, the following are a few options that may help.

  1. Update the firmware of your router;
  2. Change your router’s location;
  3. Check for any physical blockages or any sort of interference;

Before I conclude let me also address some of the related queries often made by the Spectrum service users.

Fix Red Light On Spectrum Router
Fix Red Light On Spectrum Router


You may occasionally hear Spectrum customers ask, “Why is my Spectrum router blinking red?” As previously stated, a Spectrum WiFi router blinking red indicates that the Spectrum WiFi is not working and the router is unable to establish an Internet connection.

When the Spectrum router red light is solid, it indicates that the router is unable to function normally and that there are some critical issues.


A blinking modem light indicates that you are having trouble connecting to the internet. A blinking red light on the spectrum modem indicates a possible modem failure.


Unplug the modem from the power outlet and, if necessary, remove the batteries. Unplug the power cord from the WiFi router as well.

Wait 30 seconds before replacing the batteries and reconnecting power to the modem. Allow at least 2 minutes for the reset to complete.


To access Spectrum router settings, launch a browser and type the IP address of the Spectrum router into the address bar.

The IP address can be found on the back of the router. If you can’t find the IP address, try one of these two URLs: and


After reading this post, it should be clear that the Spectrum Router blinking red light is not a cause for concern because it indicates that you are experiencing internet connectivity issues.

Regardless of the service provider you select, there is always the possibility of network connection issues. However, resolving the Spectrum router red light issue is not difficult.

In most cases, simply verifying the physical connections, rebooting your router, or resetting the router will resolve the issue.

However, if none of the solutions in this post solve your problem with the Spectrum router and the red light on the Spectrum router continues to flash, you should contact Spectrum Customer Support, who may be able to diagnose the issue remotely and recommend necessary actions.

How To Fix Red Light Issue
How To Fix Red Light Issue

Frequently Asked Questions

How do I fix the red light on my Spectrum router?

First, make sure that all of the cables are securely fastened and that they are not damaged or loose. If the problem persists, you can either manually or remotely reset your Spectrum router. You can either use the My Spectrum App or sign in to and reboot the device using the internet troubleshooting tool to reset your Spectrum router online.

What is the procedure for resetting my Spectrum router?

First, unplug your router’s power cord. Wait 60 seconds for the router to cool down before plugging it back in. Now, wait 2 minutes for your router to boot up. Once the router has restarted, you can test your internet connection to ensure it is operational.

What do I do if my broadband light is red?

If the broadband light on your internet device is red, check to ensure that all cable connections are secure before resetting the internet equipment. If you continue to have problems, contact Spectrum Customer Support 24 hours a day, 7 days a week to find out if there is an internet outage in your area.

CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts