How To Program 3-Digit Universal DVD Remote Codes? (Guide)

You will not need a remote code using the DVD player’s included remote control. This is because the remote was preprogrammed before your purchase. 

You will need a universal remote code to configure your DVD player with an alternative remote, typically a universal remote. Not just any code but the actual code for the brand of your DVD player.

How To Program 3-Digit Universal Remote Codes?

This article describes the DVD universal remote codes for all prominent DVD player manufacturers. You only need to locate the precise code for your brand. Additionally, we listed multiple codes for each brand. If a code does not work, attempt a different code.

3 DIGITS UNIVERSAL REMOTE CODES FOR DVD PLAYERS

image 1
  • ADVENT – 899
  • AFREEY – 417
  • AIWA – 376, 414
  • AKAI – 357, 395, 435
  • AMES – 431
  • APEX – 386, 390, 391, 392, 401, 424, 430, 436, 439, 445, 457, 459
  • A-TREND – 393
  • AUDIOVOX – 896
  • AXION – 896
  • B & K – 898
  • BLAUPUNKT – 430
  • BODYSONIC – 417
  • BOSE – 672
  • BROKSONIC – 394
  • CHANGHONG – 401
  • CINEVISION – 405
  • CLASSIC – 401, 431
  • COBY – 317
  • CRITERION – 448
  • CURTIS INTERNATIONAL – 906
  • CYBERHOME – 393
  • DAEWOO – 440, 441, 444
  • DENON – 362, 400, 421
  • DENZEL – 428
  • DIGITREX – 445
  • DISNEY – 458
  • DUAL – 428, 446, 447
  • DVD 2000 – 402
  • ELTA – 434, 435
  • EMERSON – 396, 405, 456, 458
  • FISHER – 378, 416
  • FUNAI – 456, 458
  • GE – 403, 409, 430
  • GOLDSTAR – 396, 405
  • GO-VIDEO – 407, 426, 431, 455
  • GREENHILL – 430
  • HAAZ – 451, 452
  • HARMAN KARDON – 427
  • HITACHI – 404, 407, 419, 428
  • HITEKER – 445
  • INFINITY – 417
  • INSIGNIA – 405, 456
  • INITIAL – 430
  • INTEGRA – 422, 442
  • JBL – 427
  • JVC – 368, 406, 418, 901
  • KENWOOD – 400, 429
  • KISS – 428
  • KLH – 430
  • KONKA – 372, 373, 374, 375, 410, 411, 412, 413
  • KOSS – 415
  • LASONIC – 451, 454
  • LENOXX – 435
  • LG – 396, 405
  • LINN – 443
  • LITEON – 318
  • MAGNAVOX – 360, 370, 398, 408, 456, 900, 903, 904
  • MARANTZ – 360, 396, 398, 405, 408, 423, 903
  • MEMOREX – 446
  • MICROSOFT – 403, 409
  • MINTEK – 430
  • MITSUBISHI – 364, 402
  • MUSTEK – 431
  • NAD – 396, 405, 433
  • NAKAMICHI – 432
  • NESA – 430
  • NORCENT – 317, 318, 319, 905, 907
  • ONKYO – 422, 892
  • OPTIMUS – 404
  • ORION – 394
  • ORITRON – 377, 415
  • PANASONIC – 362, 363, 400
  • PACIFIC – 446
  • PHILIPS – 360, 362, 370, 387, 396, 398, 400, 408, 423, 437, 755, 891
  • PHILIPS-MAGNAVOX – 398, 408, 423, 900, 904
  • PIONEER – 366, 403, 404, 893, 897
  • POLAROID – 385
  • POLK AUDIO – 398, 408, 903
  • PORTLAND – 435
  • PROLINE – 415
  • PROSCAN – 365, 403, 409
  • RADIOSHACK – 404, 443, 449, 453, 894, 895
  • REOC – 451
  • RCA – 365, 403, 409, 430, 443, 449, 453, 895
  • ROTEL – 406
  • SABA – 894
  • SAMSUNG – 369, 407, 454, 455
  • SAMPO – 417
  • SANSUI – 394
  • SANYO – 416
  • SEARS – 394
  • SEG – 428
  • SHARP – 359, 397
  • SHERWOOD – 425
  • SHINCO – 430
  • SHINSONIC – 430
  • SONY – 320, 321, 322, 361, 389, 399, 909
  • SYLVANIA – 456, 458
  • SYMPHONIC – 456, 458
  • TEAC – 404
  • TECHNICS – 400
  • TECHWOOD – 433
  • TEVION – 388, 446, 447, 448, 449, 450, 451, 452
  • THETA DIGITAL – 404
  • TOSHIBA – 360, 394, 398, 436, 447, 890, 902, 908
  • UNITED – 449
  • WHARFEDALE – 417, 442
  • WHITE WESTINGHOUSE – 458
  • XBOX – 409
  • YAMAHA – 362, 400, 420, 900, 904
  • YAMAKAWA – 428, 438
  • ZENITH – 358, 367, 396, 405, 437

HOW DO YOU PROGRAM THE UNIVERSAL REMOTE FOR A SONY DVD?

  • Turn on the DVD recorder. Verify that the DTA is activated and implemented correctly.
  • Hold the universal remote in front of the device to be programmed.
  • Locate the “PROG” button on the universal remote. Hold the button until the remote’s LED indicator light illuminates. Click on the “INFO” icon.
  • If you complete the first three steps, you will observe that the tiny LED light continues to blink.
  • Find the applicable code for your device below and input it. Once you enter the correct code, the DVD will display “Success.” Otherwise, try another code. Alternatively, if you input an incorrect code, your DVD will display “Sorry.” Repeat the procedure using a different code.
  • Press any of the function buttons on the remote. If it works, you followed the steps correctly. If it fails, repeat the steps and try a different code.
Program Universal Remote for Sony DVD

HOW TO PROGRAM A UNIVERSAL REMOTE WITH DVD PLAYER CODES?

The first method for programming your universal remote to operate your DVD player has already been described. If the technique is effective, you may employ this alternative method.

  • Locate the PROG button on your remote control and depress it until a small LED light illuminates.
  • Select the DVD option.
  • Enter the relevant DVD code for your DVD player in the space provided above.
  • If the light turns off after entering the code, the code is entered correctly.

HOW DO YOU DETERMINE WHETHER A SONY REMOTE IS A UNIVERSAL REMOTE?

Universal remotes are included with some DVD players, and some are included with some DVD players. You can use the remote to control devices other than the DVD player.

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)

LG DVD PLAYER UNIVERSAL REMOTE CODE PROGRAMMING

Check if your DVD remote has the ‘Set’ and ‘Mode’ buttons to determine if it is a universal remote. If so, it is a universal remote control.

If you have any additional code not listed here, please add it to the comment area. We will be highly grateful. Check out additional categories to locate universal remote codes for other brands of your electronic devices.

LG DVD PLAYER UNIVERSAL REMOTE CODE PROGRAMMING

Codes are a series of unique numbers that, when encoded into your device/s or equipment, generate a centralized command across all remote controls via programming. 

Therefore, you only need to operate one instead of dealing with multiple remote controls. These codes are designed exclusively for the brand and model of your device. 

This task may sound light and straightforward, but it is anything but. Especially if you are not tech-savvy, you will frequently encounter repetition of steps and impatience; therefore, it is essential to maintain concentration on the task. 

3-Digit Universal DVD Remote Codes

After completing this task, you will be nearly prepared for a new entertainment experience. Suppose you are interested in how to accomplish such a convenient entertainment experience. In that case, the following is a detailed and step-by-step guide on how to program your remote control on your device: 

  • Secure the codes designated for your device to avoid interruptions during the process. The relevant codes are listed below. In addition, prepare your devices and examine the condition of your remote. 
  • Your device should be in SETUP Mode to begin. To accomplish this, click the SETUP button until a red light illuminates.
  • Select the device type you are currently programming with the remote by pressing the device button. A blinking red light will flash once and then remain on. 
  • You are now required to provide the code. Enter it attentively and verify its accuracy to prevent errors. 
  • Once inputting the code, you must power down your device to save it. 
  • The code is stored if the device is turned off, which is an initial indication of successful programming. After one minute, power on the device. 
  • Check its functionality by navigating and pressing a few keys to determining whether it is operational. If every essential function is, the programming is effective. However, if some of it does not work, repeat the steps and use a different code.

Follow the steps precisely and avoid missing any indicators. You can follow the same steps to program other devices with your remote. Multiple codes allow you to select another if the first attempt fails promptly. 

FREQUENTLY ASKED QUESTIONS

How do you program a universal remote to a DVD?

Turn the gadget on. Press the appropriate device button on the remote control: “TV,” “DVD,” or “AUX.” Hold the “RCU SETUP” button until the device’s key blinks twice.

Can a universal remote be used with my DVD player?

A universal remote control is compatible with DVD devices from various manufacturers, such as Sony, LG, Samsung, etc. Additionally, it is compatible with televisions, Blu-ray players, cable boxes, and other entertainment equipment.

How can a universal remote be programmed into a DVD player without a code?

To program your universal remote without a code, you must: Hold down the SET and Zero (0) controls simultaneously four times on your universal remote. This is a crucial stage where the majority of people fail. The LED light indicator (typically red) will then illuminate steadily.

How do DVD codes work?

DVD region codes are codes that prevent DVDs from being played outside of their intended geographic region. Entities who own or administer the DVD’s content utilize the codes to regulate distribution.

CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts