How To Program AC Universal Remote Codes? (Easy Guide)

Looking for an Air Conditioner Remote Control Code Work List? Lost your AC remote? If you have just purchased a new universal AC remote and need the programming code, we have it here. We have remote codes for all brands of air conditioners. 

This list of codes will assist you in programming your old or new universal remote to activate your air conditioner. If you lost your air conditioner remote and purchased a universal AC remote, the below codes will work with your air conditioner brand.

Troubleshooting: Issues on AC Universal Remote Codes

Issue	Solution
The universal remote may not be compatible with your air conditioner.	Check the compatibility list for your universal remote to make sure it is compatible with your air conditioner.
You may have entered the code incorrectly.	Try entering the code again carefully. If you are still having problems, you can try searching for the code online.
The air conditioner may be in standby mode.	Make sure the air conditioner is not in standby mode. If it is, press the power button on the air conditioner to turn it on.
The batteries in the remote may be dead.	Replace the batteries in the remote and try again.
The remote may be defective.	If you have tried all of the above and the remote is still not working, you may need to replace it.

THE IMPORTANCE OF UNIVERSAL AC REMOTES

AC remotes are simple to misplace and challenging to replace. It is nearly impossible to locate a replacement remote for your Air Conditioner without purchasing the entire unit. In addition, AC remote controls are rarely marketed separately. Herein lies the necessity for a universal AC remote. 

Universal AC remotes enable you to operate multiple AC brands and models with a single remote. In addition, they can control any air conditioner as long as they are provided with the appropriate AC universal remote code. 

These codes are brand-specific, and once you’ve programmed the remote with the correct code, you can immediately begin using it. 

In addition to entering the correct code, the only requirement for using a universal remote is for the air conditioner to be able to detect IR signals. Before purchasing a universal remote, ensure your air conditioner has an infrared (IR) detector; setting up the remote is only possible.  

CODES FOR AC UNIVERSAL REMOTES

Each central air conditioner brand has its universal remote code. The following are some of the most common universal AC remote codes. 

How To Program RCA Universal Remote Codes For Sony Blu-Ray Player? (Guide)

YORK 

• 0107
• 1266
• 0238
• 0750
• 0751
• 0752
• 0753
• 0754
• 0755
• 0756
• 2430
• 0573

YCONON 

• 0039

WINIA 

• 0993
• 0550
• 0481

WHIRLPOOL 

• 1760
• 0502
• 0678
• 0164
• 0165
• 0166
• 0167
• 0168
• 0169
• 0170
• 0677

UNI-AIR

• 1986
• 0450
• 0735
• 0222
• 0223
• 0224
• 0962
• 0871
• 0734

TRANE 

• 1768
• 0227
• 0228
• 0229
• 0230
• 0231
• 0232
• 0739
• 0598
• 0743

TOSHIBA

• 1643
• 0107
• 0108
• 0109
• 0110
• 0111
• 0112
• 0113
• 0114
• 0115
• 0116
• 0117
• 1011
• 0479
• 1001
• 0489
• 0969
• 0493
• 0494
• 0495
• 0496
• 0498
• 0499
• 0815
• 0561
• 0619
• 0620
• 0621
• 0622
• 0623
• 0624
• 0625
• 0626
• 0627
• 0628
• 0629
• 0630
• 0562

TECO

• 1792
• 0045
• 1007
• 0109
• 0986
• 0256
• 0768
• 0473
• 0475
• 0474

TCL

• 1305
• 0861
• 0273
• 0274
• 0275
• 0276
• 0277
• 0278
• 0279
• 0280
• 0281
• 0493
• 0786
• 0787
• 0788
• 0789
• 0790
• 0791
• 0792
• 0793
• 0570
• 0476

SHARP

• 1640
• 0096
• 0097
• 0098
• 0099
• 0100,
• 0101
• 0102
• 0103
• 0104
• 0105
• 0106
• 1024
• 0525
• 1007
• 0608
• 0994
• 0609
• 0631
• 0617

SANYO

• 0060
• 0061
• 0062
• 0063
• 0046
• 0047
• 0048
• 0049
• 0050
• 0051
• 0052
• 0053
• 0054
• 0055
• 0056
• 0057
• 0058
• 0059
• 0064
• 0065
• 0067
• 0068
• 0069
• 0070
• 0071
• 0072
• 0073
• 0074
• 0075
• 0076
• 0077
• 0078
• 0079
• 0080
• 0081
• 0082
• 0083
• 0084
• 0085
• 0086
• 0087
• 0088
• 0089
• 0090
• 0091
• 0092
• 0093
• 0094
• 0095
• 1582
• 1016
• 1011
• 0519
• 0530
• 0529
• 0598
• 0599
• 0600
• 0601
• 0602
• 0603
• 0604
• 0605
• 0558
• 0559
• 0605
• 0561
• 0562

SAMSUNG

• 1726
• 0188
• 0189
• 0190
• 0191
• 0192
• 0193
• 0194
• 0195
• 0196
• 1015
• 0503
• 0700
• 0701
• 0702
• 0703
• 0704
• 0705
• 0706
• 0707
• 0518
• 0516

CHUNGHOP UNIVERSAL AC REMOTE AND REMOTE CONTROL CODES

See these articles on Motorola Remote codes and Sky remote codes

Chunghop universal AC remote is one of the most widely used universal remote controls. The Chunghop 1000 in 1 universal AC remote enables you to operate a variety of brands of air conditioners with optimal efficacy. 

It also has the most modern features, including turbo mode and thermal Mode. However, the Chunghop AC remote must still be programmed with remote control codes.

It is straightforward to use and configure. Indeed, the Chunghop AC remote can be programmed with remote control codes to activate its 1000-in-1 function. You can perform the laborious task of locating the correct AC codes. 

As the Chunghop AC universal remote codes are either printed in the instruction manual or on the top of the packaging, they are not required. However, you only need to seek the brand of your air conditioner in the provided list. Enter the written credentials. It is a straightforward procedure that requires little time. 

You can immediately appreciate your air-conditioned room. Furthermore, Chunghop AC remote codes are straightforward to program. Using the below-described technique, programming Chunghop AC remote controls with remote codes is simple.

SYMBOLS FOR AIR CONDITIONING REMOTE CONTROLS

It’s common to need clarification on all the modes and features available on AC remotes. With a practical guide, it’s easier to comprehend all of these unique symbols and modes. So let us guide you through the various symbols and functions of remote controls for air conditioners. 

COOL METHOD

This is the most basic and standard air conditioner setting. It permits the air conditioner to release chilly air until the desired temperature. 

TEMPERATURE MODE

This Mode enables you to heat the room rather than cool it. Essentially, it is the opposite of Cool Mode. 

DRY STATE

This Mode is optimal for days that are hot and humid. It regulates the room’s humidity and removes extra moisture, leaving the space dry and comfortable.

FAN MODE

This Mode uses the least amount of energy to maintain the desired temperature. It functions in tandem with the compressor to maintain a constant temperature by cycling on and off at regular intervals.

TEMPERATURE REGULATOR

The ‘+’ and ‘-‘ controls on the remote allow you to adjust the temperature to your specifications. 

HOW TO CONFIGURE A UNIVERSAL AC REMOTE?

After selecting an appropriate universal AC remote and configuring it, you can finally unwind in a revitalizing environment. According to our research, two standard methods exist for connecting your remote to your air conditioner.

SEARCH THE UNIVERSAL CODE BY HAND

Follow the steps below carefully to locate the universal remote code specific to your AC brand and model.

• Put your AC on standby first. Please do not attempt to set up your remote with the air conditioner running; instead, place it on standby and proceed.
• Align the remote with the air conditioner.
• Press “Set” and search for the universal code for your AC model by pressing “-” and “+” on the remote. 
• When you discover the appropriate code based on the brand and model of your air conditioner, press “Enter.”
• Use the various buttons on the remote and attempt to alter the temperature or Mode to determine whether or not all functions are operating correctly.

If some functions are not working, attempt a different code and continue testing until you find one that enables you to use all features efficiently. 

AUTOMATIC WORLDWIDE CODE LOOKUP

Some remotes, such as the Chunghop AC remote, can autonomously locate the appropriate AC universal remote codes. 

Consequently, sparing you the bother of searching through hundreds of codes to find the correct one. The subsequent stages will assist you in automatically locating a universal code. 

• First, ensure that your air conditioner is turned off and inactive.
• Second, align the remote with your air conditioner.
• The remote will automatically begin seeking the code by pressing and holding the “Set” button for 5 seconds.
• When the remote detects the correct code, a chime will sound.
• Press any icon on the remote to terminate the search.
• Use the remote’s various functions, such as adjusting the temperature, to determine whether or not it is operational. 
• If some features are not functioning, repeat the steps outlined above and end the search when you hear a beep from a different code than the one you entered.
• After attempting multiple codes, select the one that enables you to access the remote’s full functionality.

CONCLUSION

Universal remotes are very convenient and frequently permit simultaneous use with multiple devices. As a result, they are helpful in educational institutions and workplaces with multiple air conditioners and a high likelihood of losing the original remotes.

Purchasing and configuring a universal AC remote can be arduous for many individuals. However, after carefully perusing this article, we hope your questions have been answered and you feel more comfortable using a universal remote. 

Setting up a universal remote is easy, but only if you know what you’re doing. However, we have provided sufficient information for you to have no doubts about anything. 

FREQUENTLY ASKED QUESTIONS

Question	Answer
What is the most common reason why a universal remote doesn’t work with an air conditioner?	The most common reason why a universal remote doesn’t work with an air conditioner is that the code is not entered correctly. Make sure to enter the code slowly and carefully, and if you are still having problems, you can try searching for the code online.
How do I know if my universal remote is compatible with my air conditioner?	The best way to know if your universal remote is compatible with your air conditioner is to check the compatibility list for your remote. This list can usually be found in the owner’s manual or on the manufacturer’s website.
What if I can’t find the code for my air conditioner?	If you can’t find the code for your air conditioner, you can try searching for it online. There are many websites that list codes for different air conditioners. You can also try contacting the manufacturer of your air conditioner for help.
What if I’ve tried everything and my universal remote still doesn’t work with my air conditioner?	If you’ve tried everything and your universal remote still doesn’t work with your air conditioner, you may need to replace the remote. You can also try contacting the manufacturer of your remote for help.

How do I configure my universal remote to operate my air conditioner?

Ensure that the device is in standby mode and not operating. Then, aim the universal AC remote toward your air conditioner. Press the “Set” button on the remote for 5 seconds, and the remote will begin seeking the code automatically. When a code matches the model of your air conditioner, you’ll hear a sound.

How can a universal remote be programmed without a code?

To program your universal remote without a code, you must: Hold down the SET and Zero (0) controls simultaneously four times on your universal remote. This is a crucial stage where the majority of people fail. The LED light indicator (typically red) will then illuminate steadily.

Which Mode is AC used in?

Several configurations are available on your air conditioner, including the Dry Mode, Cool Mode, Fan Mode, and Auto Mode we mentioned earlier. Choosing the Mode depends on your ultimate objective, and certain modes perform best under specific conditions.

References:

• How to Program a Universal Remote Control – Lifewire
• Universal Air Conditioner Remote Control Codes – uremotecodes.com
• Universal AC Remote: Purchasing, Setting, Replacement, and More