How To Program Arris Cable Box Universal Remote Control Codes?
You can program your devices to use only one remote for added convenience in your entertainment setup.
You’ll need a universal remote to control your viewing and audio devices, including your cable box! Follow our technical team’s step-by-step instructions below to learn how to do this with your Arris cable box.
ARRIS CABLE BOX PROGRAMMING UNIVERSAL REMOTE CONTROL CODES
To continue with the programming or pairing process, you must know that codes must be used throughout the process.
These codes must be properly encoded to generate a precise command across all devices you wish to program. Here’s step-by-step guidance on how to do it:
- Collect all of the passwords for your converter box. You can either jot it down or take a screenshot with your phone. This will save you time when you need to enter the codes and when asked on the screen.
- Now that you have the codes, double-check that the converter box you want to set with the remote is plugged in and operational. Turn on that device throughout the entire procedure. Aside from that, make sure the remote you’re programming has working batteries so it doesn’t create any problems later.
- To commence, hold down the CBL button on your remote for a few seconds. This button functions as the cable box’s component button. If the LED light on the turns on, release the CBL button and move on to the next stage.
- Then you’ll be prompted to enter a code from the list below. To prevent errors during the procedure, ensure that the code is entered properly.
- Once you’ve entered the code, point your remote control at the box and hit and hold the power button until the box turns off.
- When your device turns off, it means that the programming process was effective and that the code was successfully stored. Turn your converter box back on to validate its functionality.
- Once it’s turned on, use some of the buttons to see if it reacts to its commands. If some of the buttons do not function, you will have to repeat all of the steps and use a different code.
- If the code you entered appeared to function properly, save it by pressing the component or CBL button on your remote twice until the LED light blinks twice. This signifies that the code has been stored.
UNIVERSAL REMOTE CODES FOR AN ARRIS CABLE BOX
5-DIGIT CODES
- 52187
- 51982
- 51376
- 52378
- 51998
- 42384
- 42717
- 45832
4-DIGIT CODES
- 1585
- 1998
- 5097
- 2437
- 1982
- 3723
- 0858
- 1274
- 5131
- 0476
- 1376
- 2952
- 5537
- 2187
- 2378
3-DIGIT CODES
- 134
- 132
- 176
- 198
- 245
- 287
- 217
- 219
SEARCHING FOR A DEVICE CODES
If the Brand of your TV or Audio device is not listed in the code list, try searching for your code.
Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)
1=TV AND 3=AUDIO
- Turn on the gadget that you want to control.
- Hold down the MENU and OK keys until the Power button flashes twice, then release both.
- 9-9-1 is the answer.
- Press number 1 to look for a TV code, and digit 3 to look for an audio device code. After the 1 or 3, the Power icon will flash twice.
- Press and release the CURSOR UP button while aiming the remote control at the device until the device turns off. (Note: You may need to press CURSOR UP numerous times).
- The remote control will transmit IR codes from its library to the target device while in search mode.
- When the device turns off, hit OK to save the device’s code. The Power switch will illuminate twice.
WHAT ARE THE ADVANTAGES OF AN ARRIS CABLE BOX REMOTE?
Arris Cable Box Remote has several advantages, some of which are mentioned below:
- The device is straightforward to use and inexpensive.
- It relieves tension and saves time by turning off multiple appliance remotes.
- No more battery consumption because you only need to keep this one device, which is less expensive.
- It is fairly simple to write.
- You can keep the passwords for future use.
This remote has made our lives easier because we no longer have to deal with the hassle of routine remote maintenance, which saves us a lot of time and effort.
Numerous global remote services are available; choose the one that best fits your budget. But, of all the devices you have, the Atlantic broadband universal remote is the finest.
FREQUENTLY ASKED QUESTIONS
How do I connect my Arris control to my television?
Point the remote at the Media Player and press and hold the UP and SETUP buttons until the power button on the remote blinks quickly. You should see two slow remote power button blinks after a few seconds, signaling that the remote has successfully paired.
How do I discover the code for my TV remote?
Check the product manual for the remote code. The simplest method to locate a TV remote code is to consult the product manual. Don’t be concerned if you misplaced the printed manual. Take notice of the model and serial number on the back panel of your television.
What exactly is Arris on my television?
Using the on-board tuners on the Arris Gateway TV box and Portal system, you can view and record six HD channels at the same time, while also viewing up to five previously recorded programs. Each TV that you want to use to access these functions requires a Portal.
How do I link a remote to a television without using codes?
To configure your universal remote without a code, press the SET and Zero (0) buttons on your universal remote four times simultaneously. This is a critical stage, and it is where most people fail. The LED light indicator (usually red) will then switch on steadily.
I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!