How To Easily Program Hisense TV Remote Codes? (Comprehensive Guide)

Hisense is committed to delivering consumers innovative electronic products, such as televisions. Since 2004, the company, founded in Qingdao, China, in 1969, has been recognized as one of the largest TV manufacturers in China.

Hisense has faced several patent infringement litigation over the years, with the most recent being filed by Flexiworld, which accuses the company of violating five patents.

Nonetheless, we can all concur that Hisense is the television market leader. However, you may occasionally encounter remote issues; knowing the universal remote codes can be helpful in these situations.

 Not to worry, though. I have completed the research for you. Just keep reading!

WHAT ARE HISENSE TV’S UNIVERSAL CODES?

Hisense TVs are an excellent low-cost brand that enables you to purchase a smart TV for a fraction of the cost.

Problems may arise if the remote control for the smart television is lost or damaged. There is a wide variety of sizes, dimensions, and functions for universal remote controls. Others utilize push buttons, while the majority use touch displays.

Hisense TVs support over 50 universal remote codes. Unique codes are designated to various models, manufacturers, and service providers. You must enter the correct code to synchronize your universal remote with your Hisense TV.

You can use your smartphone if you need a Hisense TV remote or know which one to use. Check the model number before purchasing a remote. Compatible with the following remotes and codes is your Hisense television:

THREE-DIGIT CODES FOR HISENSE TV

756

759

763

764

765

FOUR-DIGIT CODE FOR HISENSE TV

0073	0182	0216	0848
0208	0009	0145	0156
0227	0508	0696	0748
0753	0821	1170	0780
0178	0156

5-DIGIT CODE FOR HISENSE TV

12183

10748

11758

GE UNIVERSAL REMOTE CODES FOR HISENSE TV

0073	0182	0216	6161
5331	6171	1651	6251
4671	1741	2891	2141
2081	0671	5341	0001
2211	3671	4391	0182
4381	6161	6251	6171
1651	2891	5331	2081
1741	2211	2141	5341
0001	0671	4391	3671

DIRECTV REMOTE CODES FOR HISENSE TV

10748	11756	10818	12183
11602	11314	10178	12434
12434	12360	10885	13519
12049	12098	10706	11660
12355	12419

DIRECTV REMOTE CODES

12434	10885	10818	10178
12049

XFINITY REMOTE CODES FOR HISENSE TV

10748	11602	12183	12360	11756
10706	12434	11660	10178	10885
10249	12098	12296	11314	13382
13118	0748	1756	0178

ONN REMOTE CODES FOR HISENSE TV

5130

5245

5188

CODE FOR HISENSE ROKU TV

Below are some of the Remote Control Codes for Hisense Roku TV:

031	180	387	535
0091	0366	1346	1756
3851	11756

HOW DO I LOCATE THE CODE FOR MY HISENSE TV?

You’re not alone if you need to know which code to input to pair your remote with your Hisense TV. Hisense has included a feature that enables the user to perform a code search for the TV’s remote control, which is incredibly useful. You can perform a code search by following the below steps:

ACTIVATE THE HISENSE TELEVISION.

• Press and maintain the Setup icon.
• Enter 9-1-1.
• Now, hold the start button down. Finally, press the channel up button until the television shuts off.
• When the television shuts off, use the remote to turn it back on by pressing the power button.
• If the television turns on, select the device button to save the code; your remote is now programmed to operate the television.

The TV must examine each code individually to determine if it corresponds with the universal remote control code, which can be time-consuming. This method will be successful, but it can occasionally be frustrating.

MANUALLY CONFIGURE YOUR REMOTE

You would be off to a solid start if you discovered your keycode in one of the tables above. This will facilitate the configuration of your universal remote. To program your new remote, please follow the steps below:

• Turn on the Hisense television set
• Select the TV icon on your universal remote.
• Hold the configuration button on the universal remote until the light flashes.
• Enter the universal remote’s numerical code.
• Aim the remote at the television and press the power button until it turns off.
• Eliminating the power button.
• Your remote has been programmed and is now operational.

Pairing a battery-powered or USB-powered universal remote is the shortest and most convenient. In addition, having the correct remote code beforehand will save the user ten minutes of frustration when trying to connect the remote without a code.

PROGRAMMING A REMOTE WITHOUT A CODE

It is sometimes impossible to determine which code your universal remote requires. With this in mind, Hisense provides a method for programming the remote to the television. The most effective means of accomplishing this objective are as follows:

• Press the unit’s power switch to activate the television manually.
• To engage in pairing mode, press the TV power button on the remote for three seconds.
• Aim the remote control at the television and press the channel up and channel down buttons until the television automatically powers off.
• Try again to switch the TV on using the remote control. Press the power switch to do so.
• Pressing the device button while the television is on will save the code.

After linking your remote, the code must be saved. If you do not, the TV may lose the synchronization signal, and you must begin again. In addition to being frustrating, this would also be time-consuming.

CAN A UNIVERSAL REMOTE BE USED WITH A HISENSE TELEVISION?

Hisense distributes its universal remotes, which are compatible with older Hisense televisions. Therefore, it is possible to use universal remote controls to operate Hisense televisions. However, the programming portion is lengthy and is described in the following section.

HOW TO PROGRAM A UNIVERSAL REMOTE TO A HISENSE TELEVISION?

To effectively program a universal remote to your Hisense TV, you must locate its remote code using the methods described in the preceding sections. Then, follow the below steps for a comprehensive guide to the procedure.

MANUAL PROCEDURE

• Please turn on the television and point the new universal remote toward it. Its sensor should be aimed at the television’s receiver. (the red light).
• Press the “TV” button on your universal remote control, followed by the “SETUP” button. The remote enter learning mode and searches for a nearby Hisense television.
• Once the remote’s light flickers, enter the four-digit code using one of the abovementioned methods. If the code is correct, the indicator light will flash once. If the code is incorrect, the complete procedure must be repeated.
• Hold the power button while pointing the remote at the television. If your code were correct, the operation would succeed.

CODE SEARCH TECHNIQUE

If none of the above methods for finding the remote code for your Hisense TV worked, you could make the TV search for them. Follow the below steps:

• Turn the TV on.
• Depress and maintain the Setup button.
• Enter the three-digit code 9-9-1.
• Hold the Power button on the remote and select the Channel up button until the TV shuts off automatically.

HOW TO PROGRAM A UNIVERSAL REMOTE WITHOUT A CODE FOR A HISENSE TELEVISION?

By the so-called Auto-Search Method, all codes for universal remotes will be scanned. Follow these steps if you are having difficulty locating your remote code:

• Turn the TV on.
• Click and hold the device icon (CBL, TV, or DVD) on the remote for approximately three seconds.
• When it is ready to be programmed, the LED light will illuminate.
• Press CH- and CH+ with the remote pointed directly at the television.
• The remote control will display signals. 
• Press the Down or Up key until the device is turned off.
• To verify that the code has been correctly programmed, press the Power Key. The TV will power up.
• To save the code, click the Device icon.

CONCLUSION

Losing a remote control is more prevalent than you might imagine. Therefore, having a secondary option for such an essential home entertainment device is always prudent. 

It will be of great use if you know how to program a universal remote properly. This article explains how to program this universal remote using the Hisense remote control codes. After perusing this, you will find this process to be straightforward.

FREQUENTLY ASKED QUESTIONS

Can I use any Hisense remote to operate my television?

Therefore, whether you own a Hisense TV or a Plasma, LCD, LED, OLED, or QLED TV, the One For All Hisense TV remote will work (compatibility is guaranteed)!

How can I program my universal remote without the code?

To program your universal remote without a code, you must: Hold down the SET and Zero (0) controls simultaneously four times on your universal remote. This is a crucial stage where the majority of people fail. The LED light indicator (typically red) will then illuminate steadily.

How can a universal remote be programmed without codes?

If you do not have a code for your device, download and launch the One For All Setup App on your mobile device (iOS or Android) and search for your device. This Setup App provides complete access to our code database, from which you can obtain the most recent codes for your device.