How To Program Magnavox Universal Remote Codes? (Quick Guide)

The Magnavox Universal Remote is regarded as one of the technological advancements. This is designed to control the vast majority of TV brands currently available. This blog will provide you with all of the Magnavox universal remote codes. These codes are compatible with the Magnavox universal remote mc345 as well. 

Check out Magnavox Universal Remote Review for more information. This blog contains numerous universal remote codes for this Magnavox and numerous programming techniques.

MAGNAVOX UNIVERSAL REMOTE CODES PROGRAMMING

You will need specific codes to complete the procedure successfully. The codes will be given on the following page. For compatibility, choose a code depending on your gadget and its brand. 

Here’s how to directly program your Magnavox Universal Remote with the codes:

1. Turn on your multimedia system and get your remote ready. Ensure that new batteries are installed for a smooth procedure. 
2. Select and hit the TV button on your remote control.
3. To activate learning mode on your device, click and hold the setup button until a light flashes.
4. You will now be prompted to enter the passwords. Use the numerical keys on your remote to enter the codes. Check that it is labeled for the brand of your gadget.
5. After completing all the required steps, you will test it to see if it works. Begin by powering down your gadget. 
6. Restart it and try out some remote controls, such as volume and station. If some of the buttons do not respond to the instructions, you must repeat the steps and use another code from the same list. 

If the steps do not work and the programming fails, you must restart the procedure and use another code from the list.

The same procedure applies to the other devices you want your control to be associated with. Each device must be separately set up and programmed.

MAGNAVOX UNIVERSAL REMOTE CODES

Here are the following codes for each device and its corresponding brand used for programming:

• Admiral 0130, 0129
• Advent 0036
• Akai 0034, 0102, 0117, 0090
• AOC 0063, 0093, 0058, 0096, 0024
• Apex Digital 0037, 0133, 0049, 0020
• Audiovox 0127, 0081, 0087, 0099, 0044, 0080
• Aventura 0040
• Broksonic 0130, 0090
• Carver 0123
• Celebrity 0043
• Celera 0037
• Changhong 0037
• Citizen 0132, 0090
• Coby 0067, 0134, 0135, 0014, 0009, 0011
• Commercial Solutions 0122, 0100
• CRAIG 0012, 0013
• Crosley 0043, 0123
• Curtis 0015, 0023
• Curtis Mathes 0100, 0132, 0034, 0039, 0041, 0123, 0127, 0129
• Daewoo 0127, 0041
• Dell 0119
• Denon 0039
• Dumont 0124
• Durabrand 0038, 0130, 0040
• Dynex 0094, 0042, 0002
• Electroband 0043
• Electrograph 0116
• Electrohome 0130, 0071
• Element 0088, 0073, 0001
• Emerson 0114, 0127, 0041, 0059, 0070, 0091, 0130, 0038, 0040
• Emprex 0060
• Envision 0058, 0096, 0063, 0093
• ESA 0040, 0102, 0091
• Funai 0043, 0040, 0091
• Gateway 0116
• GE 0121, 0127, 0038, 0122, 0100, 0126
• GFM 0070, 0091, 0040, 0000
• Gibralter 0124
• GoldStar 0038
• Haier 0078, 0079, 0010
• Hallmark 0038
• Hannspree 0056
• Harman/Kardon 0123
• Havermy 0129
• Hello Kitty 0127
• Hisense 0133, 0016, 0069, 0097
• Hitachi 0111, 0039
• Ilo 0059, 0070, 0072
• Infinity 0123
• Insignia 0103, 0120, 0089, 0091, 0094, 0130, 0040, 0069, 0074
• Inteq 0124
• JBL 0123
• JCB 0043
• Jensen 0036
• JVC 0130, 0035, 0007, 0051, 0065, 0082
• KDS 0061, 0073
• KLH 0037
• LG 0103, 0017, 0021, 0026, 0027, 0122, 0124, 0038
• LXI 0100, 0038, 0123, 0125
• MAG 0061, 0073
• Magnavox 0110, 0115, 0044, 0058, 0086, 0091, 0018, 0116, 0123, 0126, 0040
• Marantz 0110, 0123
• Matsushita 0106
• Maxent 0116
• MB Quart 0087
• Megatron 0038, 0039
• Memorex 0130, 0071, 0089, 0131, 0038
• MGA 0131, 0038
• Midland 0124, 0100, 0126
• Mitsubishi 0129, 0128, 0131, 0038
• Motorola 0129
• MTC 0132
• NAD 0125, 0038
• NEC 0084
• NetTV 0116
• Nexus Electronics 0001
• Nikko 0038
• Norcent 0133, 0063, 0058
• Olevia 0113, 0055, 0050
• Optimus 0106
• Optoma 0056
• Optonica 0129
• Orion 0130, 0042
• Panasonic 0105, 0106, 0053, 0007, 0109, 0126,
• PARK 0098, 0004
• Penney 0100, 0132, 0038, 0125, 0126
• Petters 0118
• Philco 0123, 0040, 0091, 0059, 0070
• Philips 0110, 0115, 0018, 0019, 0123, 0077, 0086
• Pioneer 0109
• Polaroid 0118, 0037, 0080, 0081, 0099, 0052, 0061, 0073
• Portland 0127, 0041
• Prima 0036
• Prism 0126
• Proscan 0122, 0100, 0006
• Proton 0038
• Proview 0061, 0073
• Pulsar 0124
• Quasar 0106, 0126
• RadioShack 0100, 0038
• RCA 0121, 0122, 0083, 0003, 0005, 0022, 0028, 0100, 0126, 0129, 0041
• Realistic 0038
• Runco 0124
• Sampo 0116
• Samsung 0102, 0132, 0095, 0031, 0032, 0033, 0034, 0038, 0047
• Sansui 0130, 0040, 0090, 0071, 0089
• Sanyo 0123, 0048
• Sceptre 0045, 0064, 0025, 0049, 0057
• Scotch 0038
• Scott 0038, 0075
• Sears 0100, 0038, 0040, 0123, 0125
• Sharp 0107, 0129
• Sheng Chia 0129
• Signature 0123
• Sony 0101, 0030, 0043, 0029
• Soundesign 0038
• Soyo 0085
• Spectroniq 0061, 0073
• Squareview 0040
• Superscan 0129
• Supreme 0043
• SVA 0133, 0091
• Sylvania 0114, 0123, 0088, 0091, 0040, 0059, 0070
• Symphonic 0040
• Syntax 0113, 0050, 0055
• Tandy 0129
• Technics 0106, 0126
• Techwood 0126
• Teknika 0123, 0131, 0132
• Telefunken 0034
• TMK 0038
• TNCi 0124
• Toshiba 0108, 0090, 0092, 0125, 0132, 0053
• TVS 00130
• Victor 0035
• Vidikron 0123
• Vidtech 0038
• Viewsonic 0116, 0046, 0076, 0093, 0096, 0008, 0054, 0058, 0062, 0066, 0068
• Viore 0072, 0015, 0098
• Vizio 0104, 0046
• Wards 0043, 0100, 0126, 0132, 0038, 0123, 0124, 0125
• Waycon 0125
• Westinghouse 0112, 0049, 0127, 0046
• White Westinghouse 0130, 0041
• Wyse 0058
• Zenith 0043, 0130, 0038, 0039, 0041, 0058, 0103, 0100, 0124

HOW TO PROGRAM REMOTE CONTROL CODES FOR MAGNAVOX TVS USING MOST UNIVERSAL REMOTE CONTROLS?

• Turn on the TV and make sure the remote has batteries.
• Hold the TV and SEL buttons concurrently for three seconds. On the trigger, there will be light.
• With the button lit, select the proper code from the list below. Insert the control into the TV’s three, four, or five-digit code.
• To confirm, press the VOLUME + icon. This will increase the loudness of the television.
• Press the TV button to save a code of 3, 4, or 5 characters. A double blink indicates that the information has been saved.

HOW TO DETERMINE WHETHER A MAGNAVOX REMOTE IS A UNIVERSAL REMOTE?

Universal remotes are included with some Magnavox TVs. You can use the remote to operate devices other than Magnavox TV. Look for the ‘Set’ and ‘Mode’ buttons to see if your Magnavox remote is a universal remote. If so, it’s a global remote.

If you have any code not listed here, kindly leave it in the comments section. It will be greatly appreciated. Check out other categories to discover universal remote codes for various manufacturers of your electronics.

MAGNAVOX UNIVERSAL REMOTE MC345 PROGRAMMING WITHOUT CODES

During the auto search technique, the remote scans all universal remote codes. It scans one code at a time to find the right remote code when programming a ge universal remote without codes. Please complete the steps below:

1. Turn on a smart device like a TV to use the universal remote.
2. Turn on the remote and hold down the device icon (TV, DVD, CBL, OK/SEL) for 3 seconds. The presence of an LED light shows that the device is ready for programming.
3. Aim the remote at the device and press the “CH+” and “CH-” buttons on the remote. A signal will show on the remote when the device is turned on or off. Press the “up” and “down” keys until the gadget shuts down.
4. The code can be validated by clicking on the “power” icon. The gadget should be operational. If it begins, check that the remote is programmed adequately by changing the channel.
5. You can save the code by selecting the “device” button. The device’s LED will blink twice to ensure the code is saved.

HOW TO MANUALLY PROGRAM A MAGNAVOX UNIVERSAL REMOTE?

The keycode recognizes the make and model of your equipment, allowing us to program a universal remote with ease.

1. The very first action you must do is “Turn On The Device.”
2. Your “Magnavox universal remote” symbol should be “TV.”
3. The Universal Remote is in “Learning mode” once it displays the “Light Flash.” Hold the “Setup button” until the “Light Flash” appears.
4. Then input the “Keycode” you found in the programmer’s guide. (Instruction book).
5. After that, hit and hold the power button on your remote while pointing it at the TV.
6. When the screen shuts off, the “Power Button” can be depressed.

After that, your TV should be able to be controlled by the universal remote. If not, attempt another code from the same section of the reference table.

CONCLUSION

It is simple to program and use Magnavox universal remote devices. With the instructions mentioned above and the steps, Magnavox MC 345 and Magnavox 348 remote controls can be programmed into any video, audio, or gaming device.

These remotes can control up to eight various brands of devices at the same time. If you have the correct codes for your device, you can use the straight code entry method; otherwise, you can use the auto search method. If you still have questions about the code, please leave them in the comments section. Our staff is always happy to help.

FREQUENTLY ASKED QUESTIONS

What is the function of the code find a button on my Magnavox universal remote?

Press and hold the Code Search Button for about 2 seconds, or until the LED Indicator lights up, then release the button. 4. Press and release the appropriate device selection button on the Universal Remote. (such as the TV Button).

Is there a global remote for Magnavox?

Magnavox MC348 8 in-1 Universal Remote Control | Control Up to 8 Devices with 1 Remote | Compatible with Most Major Brands | Compatible with TV, DVD, VCR Satellite, and More.

How do I connect my universal remote if I don’t have the code?

You’ll need to do the following to set your universal remote without a code: Hold down the SET and Zero (0) keys on your universal remote simultaneously four times. This is a critical stage, and it is where most people fail. The LED light indicator (usually red) will then switch on steadily.