How To Program Sansui TV Universal Remote Codes? (Easy Guide)

Sansui is a growing electronics company thanks to its high-quality TVs in attractive designs. To control your Sansui TV, you’ll need a Sansui remote; if that fails, a universal remote is your best option. 

One benefit of using a universal remote is the ability to control the functions of other home entertainment devices. A single universal remote can substitute up to five different remotes. It declutters your home and saves you the hassle of using a different remote each time you need to perform a job.

The first step is to program your remote to operate the television. The configuration steps are simple to follow, and the completion of the process consumes very little time. You will receive all of the details required to do the remote work.

UNIVERSAL SANSUI TV REMOTE CODES [2023]

Here is a list of all the available universal remote codes for Sansui TV. You can select a code for your remote device and apply it according to the directions.

3 DIGITS SANSUI TV UNIVERSAL REMOTE CODES

• 011
• 055
• 834
• 227
• 029
• 171
• 865
• 527
• 310
• 208
• 030
• 060
• 748
• 985
• 750
• 908
• 211

4 DIGITS SANSUI TV UNIVERSAL REMOTE CODES

• 0310
• 0394
• 0171
• 6071
• 0806
• 1556
• 1267
• 1230
• 1208
• 5441
• 1052
• 5871
• 1337
• 2832
• 0698
• 0888
• 0264
• 0135
• 5010
• 5006
• 1107
• 6061

5 DIGITS SANSUI TV UNIVERSAL REMOTE CODES

• 11670
• 20695
• 11904
• 11892
• 13700
• 11938
• 10173
• 13700
• 12258
• 12282
• 13559
• 10463
• 11938
• 13520

SANSUI TV REMOTE CODES COMCAST

• 10463
• 11409
• 11904
• 11911
• 11935
• 12258
• 12282
• 10171
• 10165
• 10173
• 11670
• 11892
• 11929

SANSUI TV REMOTE CODES DISH NETWORK

• 899
• 748
• 211
• 918
• 420
• 721
• 621
• 898
• 726
• 1409
• 1935
• 730
• 276
• 123
• 250
• 985
• 622
• 3377
• 908
• 1463
• 526
• 858
• 041
• 767
• 500
• 569
• 720
• 138
• 1670
• 1892
• 227
• 527
• 374
• 522
• 756
• 509
• 672
• 865
• 866
• 733
• 000
• 754
• 533
• 854
• 694
• 171
• 3564
• 265
• 0463
• 841
• 001
• 752
• 0171
• 846
• 853
• 089
• 505
• 834
• 212
• 750

HOW TO PROGRAM UNIVERSAL REMOTE TO SANSUI TV WITH CODES?

The programming specifications for each universal remote are unique. We will offer a step-by-step guide to program a GE universal remote for Sansui TV.

Visit our page dedicated to programming a universal remote with codes to locate the guide for your remote. This includes setup instructions for all standard brand remotes.

1. Press the power switch on the Sansui TV to turn it on.
2. Insert two AAA batteries into your universal and aim them at the TV.
3. When the “Setup” button’s light appears, press and hold it.
4. As we set it up for the TV, press and release the “TV” icon.
5. Choose and enter the universal code from the selection above.

If the code you entered is accurate, the small light will turn off immediately. If the code does not match the device, the light will begin to blink and will stay lit. You must now select a new code and repeat the preceding steps.

SANSUI TV UNIVERSAL REMOTE PROGRAMMING WITHOUT CODES

All universal remote codes are scanned in the remote using the auto search technique. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the steps outlined below:

1. “Turn On” the smart device, such as “TV,” that you want the global remote to control.
2. Turn on the remote by pressing and holding the device icon (TV, DVD, CBL, and OK/SEL) for 3 seconds. The LED light shows that the device is prepared for programming.
3. Point the remote at the gadget and press the “CH+” and “CH-” buttons. The remote will display on/off indications. Press the “up” or “down” key until the gadget turns off.
4. Verify the number by pressing the “power” button. The device should power on. If it begins, try changing the channel to ensure the remote is programmed correctly.
5. To save the code, select the “device” button. The device’s LED will blink twice to validate the code stored.

HOW TO MANUALLY PROGRAM A SANSUI TV UNIVERSAL REMOTE?

We can program a universal remote using the keycode, which recognizes the make and model of your equipment.

1. To begin, “Turn On The Device.”
2. On your “Sansui TV universal remote,” press the “TV” button.
3. Now, hit and hold the Universal Remote’s “Setup button” until it flashes (this indicates that it is in “Learning mode”).
4. Finally, input the “Keycode” in the programming guide. (Instructions Booklet)
5. After that, “point your remote at the TV” and then “Press And Hold The Power” button.
6. When the screen turns off, you can remove the “Power Button.”

That’s it; your TV should now work flawlessly with the universal remote control. If it doesn’t, try repeating the process with a different code from the same section of the reference table.

HOW TO CHECK IF YOUR SANSUI TV IS A UNIVERSAL REMOTE?

Universal remotes are included with some Sansui televisions. You can use the remote to charge devices other than Sansui TV. Look for the ‘Set’ and ‘Mode’ buttons to see if your Sansui remote is universal. If so, it’s a global remote.

If you have any code not listed here, kindly leave it in the comments section. It will be greatly appreciated. Check out other categories to discover universal remote codes for various manufacturers of your electronics.

CONCLUSION

Sansui is a well-known electronic company best known for its high-quality televisions. Configuring your universal remote to operate Sansui TV is easy and takes only a few steps. 

Some techniques for programming the universal remote use codes, while others do not. We have listed all viable ways to configure your remote in this article. It may require more time, but it is well worth the effort.

FREQUENTLY ASKED QUESTIONS

How do I discover the code for my TV remote?

Check the product manual for the remote code. The simplest method to locate a TV remote code is to consult the product manual. Don’t be concerned if you misplaced the printed manual. Take notice of the model and serial number on the back panel of your television.

What is the Sansui TV RCA control code?

2 Pack Replacement for RCA 3-Device Universal Remote Control Palm Sized – Compatible with Sansui TV – Remote Codes 0463, 0171, 1670, 1892, 1935.

How do I connect my universal remote to my television without knowing the code?

To configure your universal remote without a code, press the SET and Zero (0) buttons on your universal remote four times simultaneously. This is a critical stage, and it is where most people fail. The LED light indicator (usually red) will then switch on steadily.

Who manufactures Sansui TV?

The company Orion Electric. Orion Electric, located in Osaka and Fukui, Japan, is the current manufacturer of the rebranded sets. Its subsidiary in the United States sells goods under the Sansui brand, among others. Sansui is thus currently just an umbrella name.