How To Program Sanyo TV Remote Codes? (Easy Guide)

You’ve come to the correct place if you’re searching for the old Sanyo TV remote codes. Most people are currently obsessed with remote codes for the new Sanyo TV. Unfortunately, the remote codes for the old and new Sanyo televisions differ marginally. 

This post provides several possible codes for your old Sanyo television. The majority of the codes have three digits, while others have four. You can make the three-digit codes function by adding a 0 before them.

How to Program Sanyo TV Remote Codes?

Before using the code, you must know how to program your universal remote control to operate with your old Sanyo television. Configuring an older Sanyo television with a universal remote control is also outlined below.

HOW TO PROGRAM A UNIVERSAL REMOTE TO AN OLD SANYO TELEVISION?

  • Turn on the Old Sanyo television you wish to program.
  • Hold the universal TV remote in front of your television or Device.
  • Locate the ‘TV’ button on the universal remote. Next, click on the “Setup” button. The remote control enters Learning Mode.
  • Using the above code list, locate the codes that work with your Device’s manufacturer.
  • The little light will blink four times if the procedure is completed correctly. When it does, enter one of the codes listed above for your Device. The button’s indicator light will turn off once the proper code is entered. Otherwise, try another code.
  • Press any of the function buttons on the remote. If it works, you followed the steps correctly. If it fails, repeat the steps and attempt a different code.
Sanyo TV Codes

UNIVERSAL REMOTE CODES FOR SANYO TV

GE UNIVERSAL REMOTE CODE LIST FOR SANYO TV

01800012
01080004
02680097
01100049

RCA UNIVERSAL REMOTE CODES FOR A SANYO TV

11621004
10481196
11801080
11691107
10731049

MAGNAVOX UNIVERSAL REMOTE CODES FOR SANYO TV

00390035

BLACKWEB UNIVERSAL REMOTE CODES FOR SANYO TV

19570110
20001181
01082457
18330012
18342458
0180

GE CL3 UNIVERSAL REMOTE CODES FOR SANYO TV

10511161
08013481
00012871
19112891
29915241
52611531
50012981
12611741
28813051
15815251

SANYO TV UNIVERSAL CODES FOR SONY REMOTE

335330

SANYO TV UNIVERSAL CODES FOR COMCAST XFINITY REMOTE

1015910154

SANYO TV UNIVERSAL CODES FOR COX REMOTE

07990154
11420054
0088

GE UNIVERSAL REMOTE CODES FOR SANYO SOUNDBAR

66121593
61120149
62710154
68320047
2178120000
1015920039
3018920035
1005120081
3053110250
20593590

MAGNAVOX UNIVERSAL REMOTE MC345 CODES FOR SANYO TV

00480123

RCA UNIVERSAL REMOTE 4-DIGIT CODES FOR SANYO TV

11801048
11961073
11621049
11071004
10801169

WESTINGHOUSE UNIVERSAL REMOTE CODES FOR SANYO TV

00120004
00970110
01800268
0108

ZENITH UNIVERSAL REMOTE CODES FOR SANYO TV

501201
502229
461177
224142
225149
460172
153401
521 154
498237

SANYO TV UNIVERSAL REMOTE CODES 5 DIGIT

Sanyo TV Remote Codes Complete List

VIVITAR UNIVERSAL REMOTE CODES FOR SANYO TV

11420146
01540088
02320893
01590484
0107

SANYO TV CODES FOR DIRECTV REMOTE

1114210484
1033910159
1079910154
1089310107
1020810232
1014610088

RCA UNIVERSAL REMOTE CODES FOR SANYO BLU-RAY PLAYER

39452245
22352645
22250405
00952215
22052495
07350667
07050718
0742

COX REMOTE CODES FOR SANYO TV

05490084
06450673
1221

XFINITY UNIVERSAL REMOTE CODES FOR SANYO TV

1003611480
1226411142
1178510799
1073511362
12049

3-DIGIT UNIVERSAL REMOTE CODES FOR SANYO TV

069
• 054
• 004
• 049
• 180
• 110
• 209
• 108
• 013
• 025
• 023

RCA UNIVERSAL REMOTE 4 DIGIT CODES FOR SANYO TV

• 0170
• 0108
• 2676
• 1585
• 0556
• 0292
• 0370
• 0373
• 0208
• 2461
• 1163
• 2279
• 1208
• 0264
• 1667
• 0009
• 0508
• 1037
• 0486
• 0412
• 0036
• 0037

RCA UNIVERSAL REMOTE 5-DIGIT CODES FOR SANYO TV

10146
10232
10798
10893
10107
14675
10036
10088
11362
11142
10159
13488
10799
13547
10054
10484
11907

UNIVERSAL REMOTE CODES FOR THE SANYO DVD PLAYER

1919
0896
0873
0670
2050
2393
0790
0695

HOW TO PROGRAM A UNIVERSAL REMOTE SANYO?

HOW TO PROGRAM A UNIVERSAL REMOTE SANYO?

Here are the steps required to program a SanyoTV with a universal remote:

KEYCODE METHOD FOR PROGRAMMING UNIVERSAL REMOTE CODES FOR SANYO TELEVISION

We can program a universal remote using the keycode method, where the keycode identifies the equipment’s make and model.

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)

  • “Activate” the Device you desire to program.
  • Select “TV” using the “Sanyo Device Universal Remote.”
  • Press and hold the “Setup” button on the Universal Remote until the “Light Flash” appears, which indicates that the remote is in “Processing mode.”
  • Enter the “Keycode” from the programming manual or the Instructions Booklet.
  • Once you aim the remote at the TV and press the “Power” button, the remote will begin transmitting the system-stored codes to the Device.
  • And disengage the “Power Button” when the display turns off.

Your television will now function properly with the universal remote control. If your Device is not functioning, repeat the previous steps using the alternative code.

USING THE “CODE SEARCH METHOD” TO PROGRAM UNIVERSAL REMOTE CODES FOR SANYO TV:

If you cannot locate the correct key code for the Device, you can set your universal remote to search mode to find the correct one. Essentially, a code in the manual activates the remote’s search function.

  • “Activate” the Device.
  • Hold the “Setup” icon down.
  • Provide the three-digit code.
  • Hold the “Power” button on the remote and then select the “Channel Up” button to “Turn Off” the Device.
  • This method may require additional time or minutes.
  • After completing the preceding steps, your remote should operate for all functions.
Programming Sanyo TV Remote Code

USING “MANUAL SETUP METHOD” TO PROGRAM UNIVERSAL REMOTE CODES FOR A SANYO TV:

If the first two methods do not work, the final method is “Manual Setup”; if you manually configure the universal remote control, your Device will function precisely.

  • Aim the Device toward the Universal remote you wish to program.
  • Press the “Setup Button” and enter the “Code” from the manual.
  • For manual programming, select whichever function you wish to “program,” such as “TV Volume Up.”
  • Hold the corresponding button on the “Original Remote Control.”
  • The blinking of one of the LEDs indicates that the file has been saved successfully.
  • Now that your “TV Volume Up” button has been stored on the Universal remote, you can use it.

Using the three techniques above, programming our Sanyo TV device with a universal remote is simple.

HOW DO YOU DETERMINE WHETHER A SANYO REMOTE IS A UNIVERSAL REMOTE?

Universal remotes are included with some older Sanyo televisions. You can use the remote to operate devices other than the Sanyo TV. First, check if your Sanyo remote has the ‘Set’ and ‘Mode’ buttons to determine if it is a universal remote. If so, it is a universal remote control.

If you have any additional code not listed here, please add it to the comment area. We will be highly grateful. Also, check out additional categories to locate universal remote codes for other brands of your electronic devices.

HOW DO YOU DETERMINE WHETHER A SANYO REMOTE IS A UNIVERSAL REMOTE?

CONCLUSION

Finding the correct universal remote code for your old Sanyo television can be difficult, but it is undoubtedly possible with patience and persistence. Whether using an ancient or new universal remote control, it is essential to have the correct code to avoid frustration and confusion. 

By following the instructions in the user manual for your universal remote control or seeking online for the code, you should be able to quickly program your universal remote to operate your old Sanyo television.

FREQUENTLY ASKED QUESTIONS

How do you configure a remote to a Sanyo TV?

Click the setup button located in the upper left corner of the remote. The uppermost light will begin flashing. The TV button is located in the top right corner. While holding down the button, enter the code that you discovered.

How do I discover the code for my TV remote?

The simplest method for locating a TV remote code is to consult the product documentation. Refrain from losing the paper manually. You can locate the model and serial number on the back of your television.

How can a TV remote be programmed without a code?

To program your universal remote without a code, you must: Hold down the SET and Zero (0) controls simultaneously four times on your universal remote. This is a crucial stage where the majority of people fail. The LED light indicator (typically red) will then illuminate steadily.

CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts