How To Program Terk Universal Remote Codes? (Easy Guide)

Implementing these universal codes to control everything with a single remote would be best. First, find the code that corresponds to the brand of your television. 

Then, you must proceed with programming the selected code from the list below. You may be considering the programming process. With the Terk Universal Remote Codes, you need only enter the four-digit code, and the operation will be nearly complete.

KEY TAKEAWAY:

The codes for Terk universal remotes can be acquired from numerous sources. It is crucial to note that the required code may change based on the model of the Terk remote and the controlled device. Remote Code Finder is a tool available on the Terk website for locating the correct code for your remote’s revision number.

TERK UNIVERSAL REMOTE CODES

• Aventura 1174
• AOC 1004, 1005, 1006, 1007, 1175, 1082, 1176, 1195, 1196, 1237
• Admiral 1001, 1173, 1083, 1211
• Akai 1002
• Aiko 1016
• Audiovox 1038
• Apex 1236, 1240, 1241
• Broksonic 1250, 1280
• Craig 1038
• Citizen 1004, 1006, 1008, 1171, 1038, 1016, 1105, 1196, 1132
• Curtis Mathes 1000, 1004, 1006, 1015, 1049, 1105, 1073, 1171, 1196, 1212
• Dayton 1004, 1006, 1171, 1196
• Daewoo 1004, 1005, 1006, 1018, 1017, 1082, 1171, 1202, 1196
• Emerson 1004, 1006, 1012, 1025, 1023, 1029, 1030, 1035, 1033, 1037, 1036,
• Envision 1004, 1006, 1196
• Fujitsu 1046, 1047
• Funai 1038, 1046, 1047

• GoldStar 1004, 1005, 1006, 1012, 1056, 1019, 1082, 1155, 1156, 1172, 1196
• GE 1000, 1003, 1004, 1006, 1022, 1052, 1054, 1087, 1100, 1165, 1166
• Hitachi 1004, 1006, 1012, 1013, 1135, 1136, 1145, 1063, 1179, 1185
• Hisense 1237
• Infinity 1062, 1130
• JVC 1012, 1013, 1014, 1054, 1060, 1063, 1066, 1123, 1157, 1159
• Jensen 1004, 1006, 1196
• Magnavox 1004, 1006, 1008, 1019, 1062, 1069, 1075, 1077, 1088, 1130
• LG 1004, 1006, 1196
• Mitsubishi 1004, 1005, 1006, 1022, 1051, 1079, 1080, 1082, 1064
• Motorola 1003, 1173
• Onwa 1038
• Philips 1003, 1004, 1008, 1019, 1012, 1062, 1068, 1069, 1075, 1088, 1087
• Panasonic 1003, 1054, 1130, 1062, 1160, 1350, 1351, 1214
• Pioneer 1004, 1006, 1136, 1185, 1179, 1196

• Philco 1003, 1004, 1005, 1006, 1008, 1062, 1069, 1019, 1075, 1077, 1082, 1088
• Pioneer 1004, 1006, 1136, 1185, 1179, 1196
• Proton 1004, 1006, 1012, 1196
• Proscan 1000, 1100, 1181, 1212, 1233
• RCA 1000, 1003, 1004, 1005, 1006, 1007, 1019, 1082, 1096, 1099, 1098
• Sansui 1191, 1208, 1282
• Samsung 1004, 1005, 1012, 1015, 1019, 1082, 1105, 1106, 1171, 1172, 1196
• Sanyo 1004, 1048, 1073, 1080, 1108, 1169, 1180, 1196
• Sylvania 1004, 1006, 1008, 1019, 1062, 1068, 1075, 1076, 1077, 1088, 1130
• Teknika 1001, 1004, 1005, 1006, 1008, 1013, 1014, 1016, 1038, 1046, 1047, 1063
• Symphonic 1033, 1038, 1189
• Toshiba 1049, 1071, 1072, 1073, 1105, 1109, 1117, 1118, 1160, 1283
• Yahama 1004, 1005, 1006, 1019, 1082, 1196
• Zenith 1004, 1083, 1151, 1152, 1154, 1196, 1210, 1217

HOW TO PROGRAM A TERK UNIVERSAL REMOTE WITH AUTOMATIC SEARCH?

All universal remote codes are scanned in the remote during the auto-search procedure. It scans one code at a time to get the correct remote code for programming the control using your remote. Following are the instructions:

• “Turn On” the intelligent equipment, such as “TV,” that the universal remote will control.
• Tap the device button (TV, DVD, CBL, and OK/SEL) to “power on” the remote for three seconds. The LED light signifies that the device is prepared for programming.
• Point the remote to the device and press the “CH+” and “CH-” buttons. The remote displays on/off signals. Press the “up” or “down” key repeatedly until the device turns off.
• Check the code by pressing the “power” key. The device should power on. Change the Channel to ensure the remote is appropriately programmed if it starts.
• To save the code, tap the “device” button. The device’s LED will blink twice to confirm the stored code.

HOW TO PROGRAM A TERK UNIVERSAL REMOTE USING THE MANUAL PROGRAMMING METHOD?

We can quickly program a universal remote by using the keycode, which also identifies the manufacturer and model of your equipment.

• First, you must “Turn On The Device.”
• Select “TV” from the “Terk universal remote.”
• Now, press and hold the “Setup” button on the universal remote until the “Light Flash” appears (this indicates that the remote is in “Learning mode”).
•  Finally, enter the “Keycode” obtained from the programming manual. (Instructions Booklet)
• Once this step has been completed, “point your remote at the television” and then “press and hold power” button.
• The “Power Button” can be released when the screen turns off.

If your device is still not operating, repeat the previous steps using a different code from the same section of the reference table.

HOW TO PROGRAM A TERK UNIVERSAL REMOTE CONTROL WITH CODE SEARCH?

If you cannot identify the correct key code for the device, you could put your universal remote to search mode to find it. However, a manual code forces the remote into search mode.

• Initially, “Turn On The Device”
• Now hold the “Setup” button down.
• Enter the three-digit code “9-9-1” and then hold down the “Power” button on the remote while pressing the Channel up buttons until the device, in this example, the television, “Turns Off.”

The procedure may take longer, but locating your key code is crucial. After completing the preceding steps, your remote should support all functions.

CONCLUSION

Applying universal codes to your electronic gadget will allow you to watch your preferred programs without interruption. If the codes contain any errors, please inform us.

FREQUENTLY ASKED QUESTIONS

How can I locate my TV code?

Using the TV’s remote, navigate to Settings and then Support. This window displays the model code when you select About this TV. Once you have the model number, you can learn more about your television.

How is a universal cable remote set up?

Press and hold the relevant mode button (TV, DVD, or AUX) while simultaneously pressing and holding the OK button for one second. Let go of both keys (all the mode keys should flash twice). Next, press the number keys (0-9) on the remote control to enter the four-digit setup code.

Can a universal remote control any television?

Can a universal remote control any television? You can use a universal remote for nearly any TV. For instance, the Logitech Harmony remotes are compatible with 270,000 items from 6,000 manufacturers.

Are all universal remotes compatible with the same codes?

Also, remember that not all universal remotes use identical programming methodologies. While this guide provides a broad overview of remote programming, you should refer to the specific instructions for your remote’s brand. Every universal remote brand is unique.