JVC Universal Remote Code (A Comprehensive Guide)

If you’ve recently purchased a universal remote and need to pair it with your TV, you’ll need the JVC TV Universal Remote Codes. Below are given several universal remote control codes for JVC TVs.

There are multiple codes specified for every device. Therefore, if one of the codes does not work, please try another. The code is often a four-digit number.

Easy Programming JVC Universal Remote Codes
Easy Programming JVC Universal Remote Codes

JVC TV is one of the most well-known brands on the market regarding dependable television brands. The JVC tv remote app often includes a remote control. Nevertheless, if you lose or damage your TV remote, you can configure your TV using the TV universal remote JVC code.

KEY TAKEAWAY:

You can try alternative codes published on the manufacturer’s website or in the user manual of your universal remote control if these do not work. You can also attempt to program your remote control using automatic code search or manual code entering.

PROGRAMMING JVC TV UNIVERSAL REMOTE CODES

Consider Today is your lucky day because, due to codes, you may finally kiss your problems goodbye! What are codes precisely? Codes are numbers that generate a universal command for all types of remote controllers when encoded into a gadget. 

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)

To set the programming on a JVC remote control, the “SETUP” button must first be pressed. Next, users should watch for the red indicator light to illuminate and remain lit. 

After activation, the button can be released. Now is the moment to press the button (TV, DVD) attached to the device that one wishes to control swiftly. The indicator light should blink once, then remain steady. 

Choose one of the JVC universal codes to enter into the device in the following step. If it is valid, the light will turn off; otherwise, it will begin flashing. 

Finally, the device can be manually switched off and reset. The remote should now be fully functional. The other JVC universal codes must be tried if it does not work.

Programming JVC Universal TV Remote Codes
Programming JVC Universal TV Remote Codes

However, after overcoming all the obstacles you will face, the promise of hassle-free entertainment will become a reality. 

The second thing you will realize is that you are amused without interruption. Please refer to this article’s tutorial for a step-by-step explanation of the procedure.

  • Check the codes listed below and collect those corresponding to your device. By doing so, you will save time during the process because you will be able to submit the codes when requested readily. 
  • If feasible, replace the batteries in your remote to ensure a smooth operation. Additionally, turn on your devices beforehand.
  • To activate “Learning Mode,” press and hold the SETUP button until a flashing light indicates its status.
  • Enter the codes using the remote’s number buttons. 
  • Press the power button to switch off your gadget. 
  • After a few seconds, turn it back on after it has been turned off. Try out a couple of commands to see whether your remote responds.  
  • If you still need to, you must redo the process from the beginning and use a different code from the list.

Codes are also designed exclusively for your brand and device type, reducing compatibility concerns.

Although this may appear simple, it requires some patience and task-specific concentration. If you’re not tech-savvy, you may encounter repeated tasks and become frustrated.

REMOTE CONTROL CODES FOR JVC TVS

image 143
Remote Control Codes for JVC TVs

3-Digit JVC TV Universal Remote Codes

  • 024, 094, 066, 557, 655, 559, 012, 026, 030, 160, 190, 405, 533, 570, 164, 642, 560, 217, 013, 055, 065, 059, 141, 089, 901, 182, 123, 030, 160, 190, 405, 141, 231, 404, 040, 051, 008, 091, 082, 066.

4-Digit JVC TV Universal Remote Codes

  • 0508, 2321, 0067, 5170, 1096, 1115, 4201, 0653, 2118, 3650, 0731, 1055, 0617, 1010, 5203, 1795, 0141, 1795, 5071, 0321, 5199, 1009, 1818, 0481, 0053, 1180, 3841, 0311, 1080, 5204, 0993, 0060, 0771, 0418, 1180, 1123, 5206, 1048, 1117, 0802, 0308, 0093, 0023, 1182, 1131, 1058, 0650, 1281, 1307, 5311, 1109, 2005, 0069, 1911, 1227, 1133, 1227, 4107, 1011, 1111, 1114, 1430, 1029, 0607, 1060

5-Digit JVC TV Universal Remote Codes

  • 12265, 10069, 11892, 11774, 10053, 18016, 10053, 10160, 14808, 14273, 13650, 13829, 19405, 10169, 11670, 11349, 12811, 107311, 10683, 11245, 12463, 10463, 12049, 12561, 10650, 17706, 1193, 12859

HOW TO PROGRAM A JVC TELEVISION UNIVERSAL REMOTE WITHOUT CODES?

How To Program JVC Universal Remote with Hand?
How To Program JVC Universal Remote with Hand?

All universal remote codes are scanned in the remote during the auto-search procedure. It scans one code at a time to get the correct remote code for programming the control using your remote. Following are the instructions:

  • “Turn On” the intelligent equipment, such as “TV,” that the universal remote will control.
  • Tap the device button (TV, DVD, CBL, and OK/SEL) to “power on” the remote for three seconds. The LED light signifies that the device is prepared for programming.
  • Point the remote to the device and press the “CH+” and “CH-” buttons. The remote displays on/off signals. Press the “up” or “down” key repeatedly until the device turns off.
  • Check the code by pressing the “power” key. The device should power on. Change the channel to ensure the remote is appropriately programmed if it starts.
  • To save the code, tap the “device” button. The device’s LED will blink twice to confirm the stored code.

HOW TO PROGRAM A JVC TV UNIVERSAL REMOTE BY HAND?

We can quickly program a universal remote by using the keycode, which also identifies the manufacturer and model of your equipment.

  • First, you must “Turn On The Device.”
  • Select “TV” on the “JVC TV universal remote control.”
  • Now, press and hold the “Setup” button on the universal remote until the “Light Flash” appears (this indicates that the remote is in “Learning mode”).
  •  Finally, enter the “Keycode” obtained from the programming manual. (Instructions Booklet)
  • Once this step has been completed, “point your remote at the television” and then “press and hold power” button.
  • The “Power Button” can be released when the screen turns off.

If your device is still not operating, repeat the previous steps using a different code from the same section of the reference table.

JVC Universal Remote Code Complete List
JVC Universal Remote Code Complete List

HOW TO DETERMINE IF A JVC REMOTE IS UNIVERSAL?

Several TV remotes include JVC TV Universal Remote Codes. You can use the remote to operate devices other than the JVC TV. First, check if your JVC remote has the ‘Set’ and ‘Mode’ buttons to see if it is a universal remote. If so, it is a universal remote control.

If you have jvc tv remote codes not listed here, please add them to the comment section. We will be highly grateful. Also, explore other categories to locate universal remote codes for jvc tv for various brands of electronic devices.

FREQUENTLY ASKED QUESTIONS

How can I configure my One For All JVC remote?

Point the original remote at the One For All remote, choose a button on the One For All remote, and then hit the corresponding button on the original remote. Repeat for each button you wish to learn, and then the One For All will function identically to your original remote!

Can my phone operate my JVC television?

Pair the Android mobile with the JVC car receiver through Bluetooth. Find your mobile device and activate the volume control. If the connection is successful, you should see an asterisk (*) next to your mobile device. Choose “Bluetooth” and then click “Next” • Select your mobile device and select the “OK” button.

What is a remote application compatible with JVC?

What exactly is a Smart Remote? Android smartphone users can utilize the Smart Remote App to see the current status of a JVC car receiver and perform essential control.

How is a JVC remote reset?

Push and hold the LEFT () navigation, BACK, and OPTIONS buttons (push and hold all three buttons simultaneously) for at least 10 seconds to reset the remote.

CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts