After completing the setup process for your Vizio TV, you should be able to keep the TV on and access any applications or other satellite/cable channels within it. How do you fix the problem of the Vizio TV keeps restarting during setup or after an update?
If your Vizio TV repeatedly restarts during setup, after an update, or will not restart, try a few different power cycle methods, consider that multiple updates may need to be installed sequentially, check if the outlet you’re using has the proper voltage, or perform a factory reset.
It is necessary for any Vizio TV to restart after an update has occurred, as this allows the new firmware to take root and begin operating. However, once the process has been completed, there should only be one restart.
If you have updated your Vizio TV and it will not stop restarting after being set up, after an update, or will not restart at all, look below to find the specific issue you are experiencing and the solution to resolve it.
WHY DOES VIZIO TV KEEP RESTARTING?
This could be a software problem or a problem with your remote. Your television may be receiving signals from sources other than you.
Unfortunately, the problems you’re having could be caused by an internal hardware problem, such as a faulty power supply cord, power outlet, or wallboard, though there are a variety of possible causes.
This problem could be due to a manufacturing flaw, but it is also frequently caused by electrical issues such as shock/surge, fluctuations in over/under voltage conditions, and so on. This could also be due to general wear and tear; even in relatively newer models of the TV, this type of failure could be considered common.
VIZIO TV KEEPS RESTARTING
Before we get into restart issues caused by updates, let’s talk about the problem that owners have had with their Vizio TVs constantly restarting.
Restarts are warranted and necessary from time to time, but if your TV is restarting at all hours of the day with no pattern or warrant, it can be a major disruption to your television experience.
Read on for a solution if your Vizio TV keeps restarting. If your Vizio TV keeps restarting, you may need to power cycle it more thoroughly than usual. To do this, unplug your TV from the power outlet and leave it unplugged for at least one hour.
For 60 seconds, press and hold the power button on the back of the TV. While still holding the power button, plug the TV back into the wall outlet and turn it on to see if it restarts. If there are no more problems, your problem has been resolved.
1. Check Voltage
One of the most common causes is a voltage issue with your device. This indicates that the power supplied by the power supply is fluctuating. Insert a voltmeter into the power outlet to test this.
Take readings to determine the magnitude of the fluctuations. If the fluctuations are significant, this could be the cause. Changing the outlet by calling a technician would be a workable solution here.
Alternatively, you can connect various functional ports. To avoid power damage, you can also connect a voltage stabilizer between your power supply and TV.
2. Broken Adapter
If the problem persists, it is possible that your power adapter has been damaged. Confirm this by connecting a different power adapter to the system.
They may become damaged over time and require replacement. If this is an internal problem, it may be a good idea to consider purchasing a new television.
3. Vizio TV Pending Updates
If your Vizio TV keeps restarting and then installing updates, it is possible that your TV has a large number of pending updates since the last time you updated that want to bring you up to date with the latest firmware and software.
In this case, your Vizio TV will restart after an update and then proceed to the next update, causing it to reboot several times.
Alternative Video: Vizio TV Rebooting Itself
POSTS YOU MAY ALSO LIKE:
- How to Fix YouTube TV Is Not Working? Read More
- View: Xfinity Stream Roku Not Working: 10 Easy Possible Fixes
- How To Fix Fox News Not Working On Spectrum? [6 Easy Ways]
VIZIO TV KEEPS RESETTING
There is a distinction between restarting and resetting in that restarting is simply turning off and back on, whereas resetting is actually reconfiguring data within the TV and restarting once completed.
If you have a Vizio TV and notice that it is constantly pausing to reset, this can be even more inconvenient than restarting because it takes longer to complete. What should you do if your television keeps resetting itself?
If your Vizio TV keeps resetting, turn it off, unplug it from the power outlet, and unplug all devices from the TV. Hold down the power button on the TV for 30 seconds, then release it and plug it back in. Reconnect all previously connected devices and power on the TV.
VIZIO TV KEEPS UPDATING AND RESTARTING
The moment a Vizio TV updates and restarts is more advanced and involved than resetting. A Vizio TV receives the latest firmware update during an update, which helps to fix any bugs within the TV and allows other functions to run more smoothly.
This is absolutely necessary; however, it is not something that happens frequently and quickly, which can leave owners with this problem quite distraught.
If your Vizio TV keeps updating and restarting, it’s possible that your TV has multiple updates pending that need to be applied sequentially. If this is the case, the TV will reboot after one update and then proceed to another, causing it to restart several times in a matter of hours.
VIZIO TV KEEPS RESTARTING DURING SETUP
When you bring home a new Vizio TV, you will be required to connect all of your personal information to the TV, such as setting up WiFi, connecting cable or satellite, and downloading applications that you intend to use frequently.
For some, this can be a lengthy process that leaves them extremely frustrated when their TV keeps restarting during the setup process. How do you get it to stop and start again?
If your Vizio TV repeatedly restarts during setup, the voltage current coming from the outlet may be fluctuating too much. Plug a voltmeter into the outlet to confirm, and if the current value is too low or fluctuating, you may need to find another outlet or replace the current one.
If this is not the case, a power cycle may be enough to reset your TV without requiring any further investigation. This is covered in the preceding section, “Vizio TV Keeps Resetting.”
VIZIO TV WON’T RESTART AFTER UPDATE
If you had no problems with your Vizio TV during the setup process but notice that it has either automatically updated or that you have manually induced an update, you would think that the new firmware installation would solve all problems.
Although this would be ideal in an ideal world, some Vizio TV owners have reported issues with their TV refusing to restart after the update appears to have been completed. What can you do to fix this?
If your Vizio TV does not restart after an update, check to see if there is any power. With the light at the bottom of the TV turned on, press the power button on the TV to see if a light appears. There is a problem with the TV if it flashes from orange to white after more than two minutes.
If the power light comes on but there is no picture, there may be a problem with the picture. When you turn on a new Vizio TV, the white LED light will fade out.
If the light does not fade but instead turns off completely, there is a problem with the TV, and you should check to see if you are eligible for warranty or service.
VIZIO TV WON’T RESTART
If you haven’t recently updated your Vizio TV or haven’t had many issues with it, you might be surprised when you try to restart it and it refuses to cooperate.
Restarting your TV can fix any minor bugs that are only temporary by simply turning off the power and allowing the TV to flush without the need for a factory reset. However, what should you do if your Vizio TV refuses to restart?
If your Vizio TV refuses to restart, you may be able to resolve the issue by simply power cycling the TV (see “Vizio TV Keeps Resetting”).
If this does not work, you may need to perform a factory reset. To accomplish this, go to ‘Menu’ > ‘System’ > ‘Reset & Admin’ > ‘Reset TV to Factory Defaults’ > enter parental code > ‘OK.’
Resetting the TV and leaving it unplugged are two of the many possible solutions. Feel free to play around with your TV and see what works for you. We hope the methods mentioned above were helpful in repairing your television. Have fun streaming!
Frequently Asked Questions
Why does my Vizio TV keep turning off as soon as I turn it on?
Vizio TVs have an auto-off feature that is intended to save energy. By default, the TV will turn off if it detects no TV signal for ten minutes (like when your Netflix show stops streaming). From the sleep timer menu, you can disable the auto power-off feature.
Why is my new Vizio TV taking so long to update?
It’s possible that your TV has multiple pending updates that must be performed in sequence. It is not uncommon for the TV to reboot after completing one download and before beginning another during this process. The fact that your TV turns on and off while downloading these firmware updates does not indicate a problem.
Why does my TV keep rebooting?
If your Sony Android TV keeps rebooting, or if it’s stuck in an endless restart loop, you may need to perform a forced factory reset. When the TV software crashes after a firmware update and you are unable to perform a standard factory reset, the issue of continuous reboot occurs.