How To Fix The Yellow Light On Verizon Router? (3 Easy Ways)

Routers and extenders are outfitted with a slew of LEDs that flash different colors to indicate various statuses.

Unfortunately, I was perplexed the majority of the time due to my Verizon Fios equipment randomly flashing colors.

But, once I figured out what each of these colors meant, figuring out what the lights meant became a breeze. Verizon device LEDs use a variety of colors to indicate various statuses, including white, blue, green, yellow, and red.

Each color represents a different mode of operation, a fault, and so on. You can connect more than one device to the internet at the same time by using wireless internet.

It’s so convenient! Wireless connections are only as good as the router they are connected to. The absence of an internet connection is indicated by a solid yellow light on your Verizon Fios router.

When this happens, you can check the Ethernet connection and broadband cables, or you can reboot the router. If none of these solutions work, contact Fios support to re-establish the connection.

Troubleshooting: Issues on Fixing The Yellow Light On Verizon Router

Issue	Solution
No internet connection	1. Check the cables and make sure they are properly connected. 2. Restart the router and modem. 3. Power cycle the router. 4. Contact Verizon customer support.
The router is overheating	1. Place the router in a well-ventilated area. 2. Clean the vents on the router. 3. Avoid placing the router near heat sources.
The router is not updated	1. Check for firmware updates and install them if available. 2. Contact Verizon customer support to see if there are any known issues with your router’s firmware.
The router is overloaded	1. Restart the router and modem. 2. Power cycle the router. 3. Disconnect any unnecessary devices from the network. 4. Contact Verizon customer support to see if there are any known issues with your router’s capacity.
The router is defective	1. Contact Verizon customer support to request a replacement router.

VERIZON FIOS ROUTER YELLOW LIGHT – TROUBLESHOOTING

A solid yellow light on your Verizon Fios extender indicates that it is in pairing mode, and the blinking lights vary in speed depending on the distance between the extender and the router, allowing you to locate the correct position for the extender.

HOW TO FIX THE BLINKING YELLOW LIGHT ON YOUR FIOS ROUTER?

The following steps can be done when your router flashes a yellow color:

1. Reboot the Router

When your internet connection is down, the first thing you should try is rebooting or restarting your router.

To restart your Verizon router, follow the steps below:

1. Turn off your router’s power. If your router has a backup battery, make sure to disconnect and reconnect it.
2. Wait 30 seconds before resuming power and allowing the router to boot up (indicated by the LED blinking in white color).

Rebooting almost always resolves the connectivity problem. The yellow internet light will turn solid white, indicating that your Internet connection has been restored.

2. Check if your Router is Overheating

If your router is overheating, your internet connection will suffer as a result. Some of the consequences of an overheated router include internet interruption, reduced internet speed, and so on.

Turning off the router’s power supply will allow it to cool down. Disconnect your router from any backup batteries, inverters, and so on.

You can also relocate the router to a location with adequate airflow to prevent it from overheating.

Alternative Video: Fix Yellow Light On Verizon Router

SUGGESTED POSTS:

• How To Fix Spectrum Router Red Light? [4 Easy Fixes]
• How to Fix Xfinity Router Blinking White? (6 Easy Solutions)
• Xfinity Router Online Light Off: How To Fix It? View More

3. Check Ethernet and Broadband Cables

This reminds me of something. I lost internet access at home a few months ago, on an unexpected morning. I checked the router and noticed that the status light was yellow.

I rebooted my router, but nothing changed. Next, I checked the back of my router to see if an animal, most likely a rat, had damaged both my Ethernet and Broadband cables.

I had to call a technician to come replace the cables. The connection was restored as soon as the repairman replaced the cables. As a result, the next step should be to determine whether or not the cables leading to your router are in good condition.

Ethernet and fiber optic cables that allow you to connect to the Internet are typically found at the back of your router. Check to see if both of these cables are still in good condition.

Long-term use can also cause wear and tear on the cables. As a result, replacing these cables every few years is advised.

While you’re inspecting the cable for damage, make sure it’s not loosely connected to the router. If the connections are loose, you can either tighten them yourself or contact technical support.

HOW TO FIX A FIOS EXTENDER’S YELLOW LIGHT 

1. Solid Yellow Light

When in wireless mode, the extender will display a solid yellow light to indicate that it is ready to pair with the Fios router.

To continue the connection, press and hold the router and extender’s front buttons for at least 5 seconds. While the connection is established, the lights on both devices will begin to blink blue.

2. Blinking Yellow Light

The blinking yellow light indicates the distance between the extender and the router. When the blink rate increases, the extender is too close to the router.

When the blinking slows, it indicates that the extender has moved too far away from the router. The blinking yellow light will go away once you find the optimal distance between the extender and router.

FIXING THE G3100 ROUTER’S YELLOW LIGHT

The G3100 router’s yellow light indicates that the internet connection has been lost. This can be caused by a variety of factors, such as a service provider issue, inclement weather, or rodents chewing up your wires.

Because there are numerous explanations for why this occurred, there are numerous solutions, the majority of which are simple.

To begin, try rebooting your router. If it still does not work, reset the router by holding down the reset button and resetting it. If none of this works, it is most likely due to a provider or hardware issue.

The best course of action would be to contact Fios customer service and explain your situation.

CONTACT FIOS SUPPORT

If the preceding steps are ineffective, you will need to contact your Internet Service Provider. Every now and then, maintenance must be performed at the ISP’s end for a brief period of time, during which the Internet will be unavailable.

In such cases, the service provider will usually notify you in advance of such interruptions. So, if you are not notified of a maintenance break and your Internet is down, you should contact your ISP to inquire about it.

Unfortunately, there is no other option but to wait out this maintenance break.

NOTE: If none of the preceding steps work, you can try resetting your Verizon router. Many of your internet problems will be resolved by resetting. You can reset your router by continuously pressing the reset button on the back of your router for 20 seconds.

It will take a few minutes for the computer to reboot. When the reboot is finished, your internet connection will be restored.

When preparing to perform a factory reset, make sure you have your login credentials on hand so that you can easily set up your router again.

Resetting has some added benefits: 

• It will remove all the unwanted cache data on your device. 
• It will stop any ongoing attacks from hackers or any other malicious agents.

The only downside with resetting the router is that resetting will return it to its factory settings.

GETTING YOUR INTERNET BACK IS ONLY PART OF THE BATTLE

If you’ve tried everything above and it’s still not working, you should assume that the router needs to be repaired. Request technical assistance as soon as possible so that you can get your router back up and running.

To be safe, wrap your Ethernet and Broadband cables in protective sheathing to keep rodents, insects, and other creatures from damaging them. Perform routine checks to ensure that the cables’ safety is not jeopardized.

CONCLUSION

To summarize, wireless internet is one of the things that has made our lives easier. Technology has made our lives so much easier. It is extremely convenient to be able to connect more than one device to a router.

The only issue is when it does fall. There are numerous reasons why an internet connection or speed is not performing optimally. The aforementioned suggestions should help to alleviate the situation.

When you’re setting up your router, make sure it’s in an area with plenty of airflow. You want your router to remain cool and avoid overheating.

Sometimes the troubleshooting tips do not work, which can be frustrating. If you are unable to resolve the situation on your own, the manufacturer will be able to assist you.

You only need to get in touch with the technical support team. If all of this fails, you may need to contact your internet service provider to see if there are any issues with your internet connection.

There will be times when the internet will be interrupted, and you will simply have to wait for them to pass. Any such interruptions would be communicated to you by the service provider.

Frequently Asked Questions

Question	Answer
What does the yellow light on my Verizon router mean?	The yellow light on your Verizon router means that there is no internet connection. This could be due to a number of reasons, such as a loose cable, a power outage, or a problem with your router.
How do I fix the yellow light on my Verizon router?	There are a few things you can try to fix the yellow light on your Verizon router: * Check the cables and make sure they are properly connected. * Restart the router and modem. * Power cycle the router. * Contact Verizon customer support.

What do I do when my Verizon router is yellow?

Your Verizon Fios router’s yellow light indicates that it is not connected to the internet. A soft reboot is required to reconnect. For 3 seconds, press and hold the reset button on the back of your router. As it reconnects, your router will blink white.

What’s the deal with my yellow WiFi router?

If you are unable to connect to the internet, the blinking yellow light may indicate that the cable connecting the modem to the AirPort device is unplugged or that your provider’s internet service is unavailable.

How do I fix the orange light on my Verizon router?

Check your Ethernet cable first to troubleshoot the orange light on your Verizon Fios router. Allow your Verizon Fios router to cool before cleaning the dust out of it. Then attempt to restart it. If that doesn’t work, try resetting it.

What is the significance of the yellow color on my Verizon extender?

When the wireless connection is established, the extender will begin updating its firmware. … Once the firmware update is complete and the extender begins rapidly blinking yellow, you can unplug it and relocate it to a location between the router and an area with spotty Wi-Fi coverage.

References:

• Verizon Router Yellow Light? Try These Fixes – Tech News Today
• Fios Remote Not Working? Here’s How to Fix it! – Spacehop
• Why My Fios Remote Not Working? | 6 Ways to Fix It! – ElectricalGang