DIRECTV Remote Not Working (Detailed Guide)

DIRECTV is one of the world’s largest entertainment industry leaders. DIRECTV, as opposed to traditional cable, employs satellite technology. This makes it the best option for anyone who lives in an area where internet access is limited.

DIRECTV Remote Not Working, If the signal between the remote and the DIRECTV receiver is obstructed, the DIRECTV-ready tv remote will not function. Replace the remote’s batteries with new alkaline ones. Reset the TV and reconnect the remote and receiver.

Most of us are spending more time at home than usual these days. This means that we are watching more television than usual. If you’re having trouble with your DIRECTV remote, this article will walk you through some simple troubleshooting steps to get you back to binge-watching your favorite TV shows.

Video: DIRECTV Remote Not Working?

DIRECTV REMOTE IS UNABLE TO CHANGE CHANNELS

A remote’s sole purpose is to make life easier. It can be aggravating when the remote att tv does not work, specifically when it does not change channels. If you’re having this issue, the remote may be in the wrong mode.

To begin, ensure that the remote is in the proper mode by pressing the Menu button on the remote. Select ‘Remote Control’ from the ‘Settings’ menu. You will then choose ‘IR/RF Setup.’ You have the option of using Infrared or Radio Frequency.

Change the remote’s mode to IR if it is currently in RF mode. You want an infrared signal to be sent between the remote and the receiver remote button box. Choose ‘Continue,’ then press the Exit button. The remote control is now linked to the DIRECTV receiver.

THE DIRECTV REMOTE WILL NOT TURN ON/OFF THE TV.

Remote controls are made up of numerous intricate components that must all work together. If one of those components fails to function properly, the remote’s entire functionality suffers. The best way to solve this problem is to reset the remote.

Reset the remote control

Resetting the remote will remove any glitches and allow you to begin again. Press the Menu button on the remote. Go to ‘Settings,’ then ‘Remote Control.’ Choose ‘Pair/Program Remote.’

The remote should automatically reset, but you may need to reenter the 5-digit code you used to pair it. If you can’t find the 5-digit code, you can do a factory reset on the remote.

Press and hold the Mute and Select buttons at the same time until the remote flashes three times. Select by pressing 9-8-1. The remote tv code will flash four times to indicate that it has been reset to factory default settings.

THE DIRECTV REMOTE CONTINUES TO BLINK

The remote genie hd dvr communicates by blinking. It alerts us when a button is pressed and even when the batteries are running low. If your DIRECTV remote is constantly blinking, it is trying to communicate with you.

If your DIRECTV remote code continues to blink, it may be attempting to connect to the DIRECTV receiver or the TV. Remove any objects that may be in the way of the signal path. Check that the remote is close to the TV.

Clean the remote control

Remote controls are frequently overlooked. We sit on top of them. We let them go. We eat on top of them. All of these factors can cause the buttons to stick. If just one button on the remote becomes stuck, the entire remote is affected.

Remove the remote’s batteries. Press and hold the Power button for 30 seconds at the same time. If your DIRECTV remote has a Power and On volume button, press both of them simultaneously.

After 30 seconds, press each volume button on the remote several times to ensure that none are stuck. Replace the remote’s batteries. Repeat the procedure if the remote continues to blink.

If the universal remote continues to blink after several attempts, there may be a hardware problem with the remote. You can contact DIRECTV to request a replacement remote.

DIRECTV REMOTE NOT CONNECTING

Sometimes problems with the remote are caused by something other than the Samsung remote. Check the power supply to your DIRECTV receiver before you threaten to throw it away.

Begin by turning on your television. On the receiver’s face, press the Power button. If the receiver does not turn on, unplug the power cord that connects it to the power source. Wait a few seconds before plugging the cord back in.

You must now repair the remote with the receiver. Press and hold the Mute and Enter buttons on the remote until the message ‘Applying IR/RF Setup’ appears on the screen. The DIRECTV remote and receiver have been fixed.

THE DIRECTV REMOTE IS NOT ADJUSTING THE VOLUME

Remotes communicate with other devices by using a unique code. Every device has its own unique code. If the remote cannot communicate with another device, it will not function.

If the DIRECTV remote cannot communicate with the TV, it will not adjust the volume. Check that the remote is set to the correct audio mode. Examine the cable connections between the DIRECTV receiver and the television.

Check that the remote is set to the DIRECTV receiver. Press the Menu button on the remote. Choose ‘Parental, Favorites, and Setup.’ Select ‘Program Remote’ from the remote section. To program your remote to the TV, follow the on-screen instructions.

DISCONNECT ANY NEWLY INSTALLED DEVICES

To communicate with each device, the remote sends out a signal. If the remote worked before installing the new device, the signals may have been competing to communicate with it. Remove the new device and check to see if the problem has been resolved.

Volume Controls Must Be Locked

If the remote is set to the DIRECTV receiver but you still have volume problems, locking the volume mode will help.

• Step 1: Move the Mode switch to the desired volume level.
• Step 2: Press and hold the Mute and Select buttons simultaneously until a green light blinks twice.
• Step 3: Input the three-digit code 9-9-3.
• Step 4: Wait until the green light flashes twice more.

DIRECTV REMOTE WON’T PAIR/KEEPS DISCONNECTING

DIRECTV remotes are designed to communicate with the DIRECTV receiver. There is a problem with the connection between the two if the remote keeps disconnecting or will not pair.

Try resetting the TV if the DIRECTV remote will not pair or is disconnecting. Pending updates may be interfering with the TV’s ability to communicate with the remote. Unplug the television for 60 seconds before repairing the remote.

Another suggestion is to ensure that the remote is properly paired with the receiver. If there was a recent power outage, the receiver’s connection to the remote may have been lost.

Press and hold the Mute and Enter buttons on the remote at the same time. The remote Samsung tv is now synced when the message ‘Applying IR/RF Setup’ appears on the screen. If the remote is not synced, the receiver must be reset.

To reset the receiver remote code, press and hold the receiver’s Red button. This button will be located either on the face panel or just inside the access door. If you cannot locate the button, unplug the receiver from its power source for 15 seconds.

DIRECTV REMOTE IS NOT WORKING

The remote should now be connected and working properly after resetting the DIRECTV receiver. If the remote is still not working, here are two more suggestions to get it working.

Check the batteries in the DIRECTV remote if it is not responding. Replace the alkaline batteries with new ones. Clean the battery terminals gently with a Q-tip and rubbing alcohol to remove any dirt that could interfere with the connection.

Battery Strength Test

You can test the strength of the batteries in the remote to determine whether new ones are required. Simply press and hold any of the remote’s buttons. You can determine the battery strength by doing the following:

• A solid green light indicates that the batteries are in good condition.
• A fast blinking green light indicates that the batteries are running low.
• Slow/No Blinking Green Light – Replace the batteries.

Test Receiver Connection

If the remote loses contact with the receiver, it will not function. Press and hold the Enter button on the remote for 3 seconds to test the connection. Select ‘DIRECTV Receivers Input Source’ when ‘Menu’ appears on the TV screen. You may need to experiment with different inputs to find the best one for your TV.

How Do I Connect A Firestick Without A Remote To Wifi?

CONCLUSION

If nothing else works, contact the customer service department. All of your questions will be answered by a highly trained agent. However, if you follow the instructions in this guide, it should work!

References:

https://www.directv.com/support/satellite/article/KM1443062/#:~:text=Receiver%20and%20remote%20control%20reset,the%20receiver%20and%20remote%20control.&text=On%20most%20DIRECTV%20receivers%2C%20there,button%20until%20the%20receiver%20restarts.

https://www.directv.com/support/satellite/article/KM1011876/

FAQs

How do I reprogram my DIRECTV remote?

Press and hold the MUTE and SELECT buttons until the remote’s light flashes three times to reset DIRECTV remotes to their factory settings. Then, enter 981 and press the SELECT button. The remote will blink four times to indicate that it has been reset.

How do I sync my DIRECTV remote again?

Pair the remote again once your DIRECTV STREAM device is turned back on: Point the DIRECTV STREAM remote at your DIRECTV STREAM device. For 2-3 seconds, simultaneously press and hold FAST FORWARD and REWIND. When they pair, an onscreen message will notify you that your remote is ready to use.

Why isn’t my remote working despite new batteries?

Check that no remote buttons are jammed or stuck. The battery terminals on the remote control may be dirty. Remove the batteries and use a cotton bud or soft cloth to clean the remote control terminals with a small solution of alcohol before replacing the batteries in the remote control.

What does the red light on the Direct TV remote mean?

What exactly is this? Device not paired: If the remote is not paired with the receiver or becomes disconnected, the red light illuminates to indicate that the remote is currently without a receiver.