One of the most well-liked entertainment options right now is Amazon’s Firestick TV set.
If you have one of these, you might have noticed that the Firestick remote differs significantly from a typical TV remote in that it is significantly smaller and has fewer buttons.
Firestick Remote Volume Not Working, try power cycling the TV, removing any objects that are in the way of the TV and remote, and checking the remote batteries if the volume on your Firestick remote isn’t working.
Use the HDMI-CEC port to connect, adjust the TV’s IR profile appropriately, and consider performing a factory reset on the Firestick. If nothing works, get in touch with customer service.
Video: How to Fix amazon fire stick Remote Volume Issue Quickly
POSSIBLE REASONS FOR VOLUME NOT WORKING ON THE FIRESTICK REMOTE
There could be a number of causes for your remote’s volume button to stop functioning. It might be caused by bad batteries, signal interference, or old, worn-out buttons.
A power cycle may be able to resolve the issue temporarily, or the remote control may be permanently broken and need to be replaced.
How to Fix FireStick Remote Volume Not Working?
It’s possible that your FireStick remote’s volume is malfunctioning due to a number of factors, including a dead battery, incorrect audio settings, or a failed pairing attempt. Change the batteries, reboot the TV, or unpair and reconnect the FireStick remote if you experience any of the issues mentioned above.
TURN OFF THE TV
Power cycling your TV is a straightforward yet possibly useful procedure that you might wish to attempt. In order to accomplish this correctly, first turn off the TV, then take the Fire TV stick out of the Samsung TV and wait for around 30 seconds.
Make sure the Firestick is reinserted before turning it back on to ensure that the two devices start up simultaneously.
EXAMINE THE REMOTE BATTERIES
It’s likely that your Firestick remote is worn out and has non-functioning buttons if it has been around for a while-say, more than five years.
It can be as a result of dust and debris building up within the remote control over time or because the rubber on the bottom of each button has worn out over time.
The buttons being harder and harder to press might be an indicator of this problem. You may also see if hitting a button still produces the “click” sound, which would suggest torn rubber.
DO A SIGNATURE OBSTRUCTION CHECK
Low-frequency infrared radiations are emitted by the volume and power buttons on the remote control, which the television receives.
Check to see if there is anything in the radiation path that could interfere with the remote’s ability to communicate with the TV.
The volume and power buttons on the remote are the only two that emit radio-frequency rays, thus it’s possible that the rest of the remote works flawlessly but these two buttons don’t.
SET THEIR PROFILE ON YOUR TV
The following is the easiest method for doing this:
- Go to Settings on your TV.
- Access the Equipment Control page.
- Pick TV by clicking Manage Equipment.
- Instead of going to Change TV, go to Infrared Options.
- Go to IR Profile and select Change IR Profile from there.
- To see whether it resolves the problem, switch it from All Devices to your specific IR Profile.
MAKE SURE HDMI IS CONNECTED PROPERLY
Verify that the Fire TV is connected to the correct HDMI port. To enable other remote controls to manage the power and volume of the television, you must make sure it is linked to the HDMI-CEC port.
This port should be labeled on the back of your firestick TV remote or in the user guide.
DISCONNECT AND RECONNECT THE REMOTE
In some cases, unpairing and repairing the remote may be enough to resolve the issue.
All you need to do is navigate to Settings, select Bluetooth Controllers and Devices, click on Amazon Fire TV Remote, and then select the device you want to unpair your Fire Stick Remote from the TV.
Then, for at least 15 seconds, press and hold Menu + Back + Home. You’ll be taken back to the main menu by Fire TV after the unlinking is finished.
After unpairing, you need to re-pair the remote with the fire TV app to, which is simple to do by following these steps.
- Link the Firestick to the television.
- Hold the remote near your Firestick while Fire TV is starting up, then press and hold the Home button for 10 seconds.
- If pairing with the remote doesn’t happen right away, try again.
- For this method to be successful, it can take numerous tries.
CHANGE EQUIPMENT SETTINGS
Navigate to Settings on your television and select Equipment Control. After selecting this, a new menu with the Manage Equipment option will appear; you must then choose TV > Change TV.
You must then choose your preferred television brand from a selection of available options. After completing this step, you will see a prompt telling you that the Firestick remote can now be updated to add equipment.
RECORD THE FIRESTICK AGAIN
The problem could be fixed by simply restarting the Firestick with the power button.
Scroll to the Settings tab on the Firestick home screen displayed on your television and select it (You can also click the Home button on your remote to access this screen).
To automatically restart your Firestick, go to the My Fire TV menu and select Restart. Your Fire Stick will repeatedly restart if there are any power problems.
SET BACK THE TV AND THE FIRESTICK
You might need to attempt doing a Factory Reset on the Firestick device if a simple restart doesn’t solve the problem.
Click and hold the Back and Right navigation buttons for at least 10 seconds, then select Continue to complete this. Note that doing so will clear out everything you’ve downloaded and reset your preferences. Use it as a last option as a result to fire tv stick lite.
REMOTELY ACCESS THE FIRESTICK APP
You can try using the Firestick Remote App on your Android or iPhone in the interim if your remote ends up being irreparably broken and you have to wait for a replacement to arrive.
Here’s how to use the app after you’ve installed it:
- Once the Fire TV has started, use the Firestick Remote app and sign in with your Amazon account.
- From the provided list of devices, select your Fire TV device.
- Enter the code displayed on the television into the app’s prompt.
- As of right now, your phone should work as a Fire TV remote.
SPEAK TO SUPPORT
The best course of action is to get in touch with Amazon’s Fire TV Customer Support and let them know the problem if none of the aforementioned fixes seem to work.
To identify the source of the issue, they could lead you through a number of diagnostic procedures. You will be required to pay for a replacement remote if it turns out to be irreversibly damaged.
You can use the Mi Remote App to control your Fire Stick because the Fire Stick Remote uses IR technology rather than Bluetooth.
This app is a stock feature on Xiaomi phones. If your phone has an IR blaster, you can also download an IR Remote App of your choosing.
To spare yourself some valuable time, I advise you to let tech support know about the numerous procedures you tried to fix the problem if you must contact them.
Frequently Asked Questions
Why won’t my Firestick remote’s volume work?
When the wrong HDMI port is being used, the wrong audio and device settings are chosen, the batteries are low on charge, or the remote is out of power, problems with volume control can occur with Amazon Fire Stick remotes.
How do I make my Fire Stick remote sound again?
Unmute your Fire Stick and TV. To check if you unintentionally muted one of them, press the Mute buttons on your TV and Fire Stick remote controls. Play around with the Mute and Volume buttons on your linked speaker system’s remote. On the circular ring button of the Fire Stick remote, press Up.
Does the Amazon Fire Stick have volume control?
The first Fire product to use additional volume and mute controls directly on the remote is the Fire TV Stick 4K, though. As a result, you can control the level directly from the stick rather than having to go to your TV, cable box, or speaker remote.