How To Program RCA Universal Remote Codes For Sony Blu-Ray Player? (Guide)
Your Sony DVD player’s remote no longer functions? Stay calm about how to operate your DVD player at this time. A ubiquitous remote control, such as those manufactured by RCA, can substitute for the DVD player remote.
Integrating it with your DVD using codes only requires a few steps! Here is a comprehensive guide to programming RCA universal remote codes for Sony DVD players.
USING AN RCA UNIVERSAL REMOTE TO PROGRAM SONY DVD PLAYERS
Codes are generated to establish a connection between your remote and your player so that it can be programmed.
When appropriately encoded, these unique numbers establish a stable and secure connection between your DVD player and remote. You only need to know how to integrate them effectively, which we will demonstrate in this programming tutorial.
How To Program Motorola Universal Remote Codes?
Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)
- First, write down or take a screenshot of all the necessary codes for simple access later in the process. Our technical team has supplied the required and compatible codes for your RCA remote and Sony DVD player below. Choose a code between three and five digits to save time.
- Next, it is essential to inspect your devices. First, ensure that your DVD player and remote work well. Plug in the DVD player you wish to program first. Next, confirm that the batteries in your remote control are functional. This will ensure that the procedure is uninterrupted throughout its entirety.
- Now is the moment to direct the remote to the DVD player. This will allow both devices to accept signals and commands.
- The next stage is to activate the “Learning Mode” for the player. Press and hold the SETUP button until a blinking or flashing light appears.
- A little light will blink four times if you have completed this step correctly.
- Enter the codes you prepared using the number keypad on your remote. Upon entering the code, observe whether the light goes out. If it did automatically, then the encoding was successful. If not, a different code from the list must be entered.
- Aim the remote at the DVD player and hold the power button down.
- Release the power switch when the device has shut down.
- Your device’s shutdown indicates that the programming was successful. Next, turn on the DVD player and test its functionality by pressing various remote controls, such as volume and settings.
If the DVD player obeys these commands, the remote is entirely integrated with the player. If any of the commands fail, you must resume from scratch. Repeat the first step and enter a new code when prompted.
As demonstrated, the procedure can take slightly longer than anticipated due to trial and error with codes. Therefore, our audiovisual team members recommend following the instructions slowly and attentively to avoid making mistakes.
3, 4, AND 5-DIGIT RCA UNIVERSAL REMOTE CODES FOR SONY TVS
3-DIGIT CODES (V.1) FOR RCU300, RCU310, RCU410, ETC.
- 166 261 360 361 402 403 404 509
3-DIGIT CODES (V.3) FOR RCU300T, RCU404, ETC.
- 068 070 071 088 092 093
4-DIGIT CODES (V.1) FOR RCR350, RCR450, RCR815, ETC.
- 3157 3159 3164 3166 3261 3269 3270 3271 3272 3360 3361 3404 3405 3417 3419 3435 3440 3518
4-DIGIT CODES (V.2) FOR RCR612, RCR812, RCR860, ETC.
- 3166 3269 3271 3275 3305
4-DIGIT CODES (V.3) FOR RCR412B, RCR3273/3373, ETC.
- 3148 3149 3152 3154 3158 3159 3350 3364 3419 3438 3446 3463 3482 3483 3485
4-DIGIT CODES (V.4) FOR RCR804BR, RCRH02BR, ETC.
- 0533 1533 0864 0772 1033 1070 1431 1432 1433 1516 1548 1892 2043 1633
5-DIGIT CODES (V.1) FOR RCRN08GR, RCRPS02GR, ETC.
- 31516 31633 30533 31070 30864 30772 31033 31431 31904 32020 32132
CONFIGURE THE RCA UNIVERSAL REMOTE WITHOUT THE DIGIT CODE LIST
Ensure all your devices are connected to power outlets and turned on as a first step. If the remote appears unresponsive, replace the batteries.
The instructions for various commercial solutions may vary marginally, but the fundamental steps are identical.
Some manufacturers use one-touch activity sequences for remote tests, but the following procedures apply to most brands.
After ensuring that all devices and remotes are operational, follow the below instructions. These instructions do not require an inventory of RCA universal remote codes.
- Turn on the devices you wish to configure via remote control. It could be intelligent televisions, video game consoles, a universal television, or the Logitech harmony ultimate remote.
- Aim the remote at the appliance. It’s likely a TV. Hold down the television switch. The remote’s power switch (ON/OFF button) will be illuminated. The indicator light must remain illuminated.
- Press and hold the TV control and the ON/OFF button while the light is on. Do it simultaneously. It will result in the ON/OFF toggle turning off. It will then automatically switch on again.
- Once the ON/OFF switch returns to the ON position, disengage both buttons.
- Press and hold the Play icon for five seconds. On some televisions, you may need to select the Slow button instead. After that, the appliance will shut down. Press the Play (or Slow) button if the device is still on until it turns off.
- Now, you must power on the device again. To reactivate the remove, press the button labeled Reverse. Suppose it does not; continue pressing until it returns. In our example, the TV immediately powers on.
- It is time to configure the device’s button. To save the configuration, press and then release the Stop icon.
- Repeat the preceding steps for each device (appliance) to continue programming your universal remote.
It may initially appear complicated, but it is not laborious. In addition, utilizing potent remote control customization features will improve your mood.
We will configure the remote using the RCA universal remote codes list in the following method.
CONFIGURE THE RCA UNIVERSAL REMOTE CONTROL FOR DIRECT CODE ENTRY
Let’s move on to the second method of programming the RCA remote. Similarly to the first method, ensure the remote has working batteries, and all devices are powered on. (red light or another color based on the type of universal remote control should be visible, which means the component turns on).
Then, please follow the steps outlined below. You will use a brand code like a TV, VCR, or DVD this time. Utilize the RCA universal remote codes listed on this page for the following procedures.
- Press and release the device switch for the specific RCA television, television set, or another device.
- Enter the universal code listed in the table at the bottom of this page. Press and release the TV button and a four- or five-digit code from the universal remote code list if it’s a television. The ON/OFF (power) switch will illuminate and remain lit.
- Next step: Press and simultaneously hold the device button and the ON/OFF button on the remote. The ON/OFF light should turn off and then back on.
- When one ON/OFF indicator light returns to the on position, disengage both buttons. The light must remain on
- Press and hold the Play (or Slow for some remotes) button for five seconds, as in the first method. The appliance will shut down. Keep pressing if it doesn’t. It will shut down eventually.
- Press the Stop button subsequently. The device will activate.
- To configure the memory and store data, press the Stop button.
- Repeat these steps to program additional devices in your living room and other rooms. Enter the following code for each brand.
As instructed, use the following list for digit codes. If you require an RCA remote code decoder, use the browser’s search function (Ctrl + F). The browser’s unique features are the optimal approach for searching for code.
FREQUENTLY ASKED QUESTIONS
Does the RCA universal remote support Blu-ray discs?
The codebook that comes with the RCA Universal Remote contains thousands of codes compatible with various TVs, Blu-ray Players, and Soundbars. Locate your television brand in the codebook.
Will a universal remote from RCA operate a Sony DVD player?
Your Sony DVD player’s remote no longer functions? Stay calm about how to operate your DVD player at this time. A ubiquitous remote control, such as those manufactured by RCA, can substitute for the DVD player remote.
How do I program my Sony Blu-ray remote?
Press and hold the TV I/O icon on the included remote. While pressing the TV I/O button, input the brand-specific code number using the number buttons on the remote control. Press the TV I/O button again. Aim the remote at the television.
I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!
