How To Program Haier TV Universal Remote Codes? (Easy Guide)
Are you a Haier TV user who wants to program the universal remote? Then read on because we will provide you with all the Haier TV remote codes, and you can program your tv with this universal remote control. So get ready with your Haier TV and your favorite universal remote control.
First, let us give you some valuable codes to try; if they don’t work, try another one until your television is programmed with the universal remote control.
HAIER TV UNIVERSAL REMOTE 4-DIGIT CODES LIST
- 0094
- 0123
- 0810
- 0217
- 0157
- 0081
- 0216
HAIER TV UNIVERSAL REMOTE 3-DIGIT CODES LIST
- 505
- 506
- 515
- 640
- 844
- 718
- 081
- 216
- 512
- 523
- 498
- 500
GE UNIVERSAL REMOTE CODES FOR HAIER TV
- 081, 216, 217, 0081, 0216, 0217, 0157, 1147, 0935, 5078, 5120, 5139, 5307, 5380, 5409, 5432, 0671, 0861, 5321, 0921, 1741, 2141, 1161, 3831, 6141, 6151, 4851
RCA UNIVERSAL REMOTE CODES FOR HAIER TV
- 1034, 1748, 1749, 3382, 2293, 4398, 1570, 2309, 11748, 11749, 11753, 12309, 13382, 12293, 13204, 11570, 14398
HOW TO PROGRAM HAIER TV UNIVERSAL REMOTE?
OFFICIAL METHOD
- First, turn on your “Haier TV.”
- Press and hold the “TV” and “SEL” buttons at the same time for “3 Seconds” until the “Button Blinks.”
- Now, “point the remote” at the television and enter “3-digit, 4-digit, or 5-digit” codes.
- Then, to confirm, press the “Volume+” button. If the “TV Volume Increases” indicator appears, it has been programmed with your television.
- Now, click the “TV” button twice to indicate that “the code has been stored.”
That’s it; your television and your preferred universal remote have been programmed, and you can now watch television more comfortably. If the above method did not work with any digit code, then try the following method. Either method will work.
HOW TO SET UP A HAIER TV UNIVERSAL REMOTE WITHOUT USING CODES?
All universal remote codes are scanned in the remote when using the auto search method. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the steps outlined below:
- “Turn On” the smart device, such as “TV,” that you want the universal remote to control.
- Turn on the remote by pressing and holding the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds. The LED light indicates that the device is prepared for programming.
- Point the remote at the device and press the “CH+” and “CH-” buttons. The remote will display on/off signals. Continue to press the “up” or “down” key until the device turns off.
- Verify the code by pressing the “power” button. The device should power on. If it starts, try changing the channel to ensure the remote is properly programmed.
- To save the code, tap the “device” button. The device’s LED will blink twice to confirm the code stored.
HOW TO PROGRAM HAIER TV UNIVERSAL REMOTE WITH THE MANUAL METHOD?
We can easily program a universal remote using the keycode, which identifies the make and model of your equipment.
Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)
- To begin, “Turn On The Device.”
- On your “Haier TV universal remote,” press the “TV” button.
- Now, press and hold the Universal Remote’s “Setup button” until it flashes (this indicates that it is in “Learning mode”).
- Finally, enter the “Keycode” that you found in the programming guide (Instructions Booklet)
- After that, “point your remote at the TV” and then “Press And Hold The Power” button.
- When the screen turns off, you can release the “Power Button.”
That’s it; your TV should now work perfectly with the universal remote control. If it doesn’t, try repeating the procedure with a different code from the same section of the reference table.
HOW TO USE A CODE SEARCH TO PROGRAM A HAIER TV UNIVERSAL REMOTE?
If you can’t find the correct key code for the device at the time, you can program your universal remote to search for it. It’s a manual code that puts the remote in search mode.
- First and foremost, “Turn On The Device.”
- Now, hold down the “Setup” button.
- Enter the three-digit code “9-9-1.”
- Now, on the remote, hold down the “Power Button” and then press the Channel Up button until the device, in this case, your television, “Turns Off.”
The above method may take a little longer, but it is critical to find your key code. After you’ve completed the preceding steps, your remote should be functional for all in-room functions.
We hope the above methods and codes helped you program your Haier television and favorite remote control.
CONCLUSION
If any of those methods did not help you, try another method and change the code if one code did not work; otherwise, if any code and method did not work, please leave a comment below with your problem.
Also, if you have any new universal remote three or four-digit codes, please leave them in the comments section; they may also be helpful to other users.
FREQUENTLY ASKED QUESTIONS
Can I use my phone to control my Haier TV?
Compared to traditional IR remotes, the Haier Bluetooth Remote has a more comprehensive operational angle. The remote includes a built-in Google Assistant voice button that allows you to control your TV with voice commands. The Android TV remote app is now available for both iOS and Android devices.
How do I find the code for my TV remote?
Check the product manual for the remote code. The simplest way to locate a TV remote code is to consult the product manual. Don’t be concerned if you misplaced the paper manual. Take note of the model and serial number on the back panel of your television.
How do I program my universal remote to my television without knowing the code?
To program your universal remote without a code, press the SET and Zero (0) buttons on your universal remote four times simultaneously. This is a critical step, and it is where most people fail. The LED light indicator (usually red) will then turn on steadily.
How do you program a one-size-fits-all remote control without codes?
If you don’t have a code for your device, you can look it up on your smartphone (iOS or Android) by downloading and opening the One For All Setup App. This Setup App grants you complete access to our code database, from which you can download the most recent codes for your device.
I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!