Philips Universal Remote Codes: A Comprehensive Guide

Philips TV remote codes. If you’ve recently purchased a universal remote and need the remote codes to operate your Philips television, we’ve provided codes for your television that should work. If the first option does not work, try the options that follow.

How To Program Philips Universal Remote Code?
How To Program Philips Universal Remote Code?

It would be best to program the remote to work with your television using the remote codes listed below. These are instructions on programing your remote to work with your television.

Key Takeaway:

To configure a Philips universal remote, refer to the setup instructions and seek the 3-digit code for your TV, VCR, etc., in the Philips-supplied list. Also, numerous websites provide lists of 4-digit codes for various kinds of Philips universal remote controls. In addition, Director offers straightforward instructions for programming Philips universal remotes.

PHILIPS HDTV REMOTE CODES

Your Philips universal remote can operate most HDTV brands like Sony, Vizio, LG, and Samsung. Push and hold the “Setup” button until the remote’s indicator light goes red and remains red.

Enter the TV’s code by pressing the TV button on the Philips universal remote and entering its code.

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)

The Sony TV codes 0414, 0902, 0801, 0708, 0639, and 0816 are standard. The codes for Vizio televisions are 0709 and 1702, while the codes for LG televisions are 0002, 0606, 0502, 0102, 0117, 0814, 0324, 0435, 0802, 0307, 0609, and 0217. 0112, 0309, 0209, 0512, 0302, 0502, 0002, 0102, 0110, 0818, and 0895 are the Samsung codes.

Press the “Power” button on your remote after entering the code to turn off your HDTV. If it functions, the remote has been successfully programmed. If it does not work, repeat the process by pressing and holding “Setup” followed by “TV.” Insert a different code. Continue testing codes until you find one that works with your TV.

How to Program an RCA Universal Remote Control?

CABLE BOX REMOTE PHILIPS CODES

Also, your Philips universal remote can be set to operate a variety of cable box brands from Comcast and Time Warner. To program your remote, press and hold the “Setup” button until the remote’s indicator light becomes and remains red.

Click the “Cbl” button on the remote control and enter the cable box’s code. AT&T and Comcast use the codes 0752 and 0954, but Motorola uses the codes 0552, 0148, 0952, 0453, 0654, 0754, and 0048. GE cable boxes use the code 0556, whereas Time Warner devices use the code 0252.

To change the channel on your box, press “Channel Up” or “Channel Down” after inputting the code. If the channel changes, the remote has been programmed successfully. If not, repeat the process with the remaining available codes.

SATELLITE BOX REMOTE PHILIPS CODES

After programming, a Philips universal remote control can also control satellite boxes. Hold the “Setup” button on your remote control until a red light appears.

Push the “Sat” button atop the remote, then enter the remote code for your satellite box. For example, several Philips remote codes are utilized by DIRECTV boxes, including 0863, 0864, 0564, 0963, 0259, 0260, 0664, 0065, 0265, 0465, 0362, and 0564.

Sattelite Box Remote Philips Code
Sattelite Box Remote Philips Code

The codes for Dish Network receivers are 0464, 0167, 0366, 0862, 0067, 0067, 0460, 0560, and 0660. Hughes Network satellite receivers use the codes 0864, 0763, 0765, 0465, 0564, 0362, and 0659, while Motorola satellite receivers use the codes 0466 and 0463.

After programming the remote, change the channel by pressing either “Channel Up” or “Channel Down.” If the channel does not change, you must try one of your box’s other codes.

If none of the codes provided work, or if you have a different manufacturer than those listed, you can visit the Philips universal remote website to obtain more codes for your remote.

REMOTE CODES FOR PHILIPS TELEVISIONS

Philips remote control codes If you’ve recently purchased a universal remote and need the remote codes to operate your Philips television, we’ve provided codes for your television that should work. If the first option does not work, try the options that follow.

It would help if you programmed the remote to work with your television using the below remote codes. These are instructions on programing your remote to work with your television.

PHILIPS HDTV CODES

  • 1129
  • 1236
  • 1237
  • 1239
  • 1261
  • 1334
  • 1351
  • 1390
  • 1411

PHILIPS TV CODES

  • 1004
  • 1007
  • 1011
  • 1017
  • 1018
  • 1047
  • 1053
  • 1056
  • 1057
  • 1059

PHILIPS DVD CODES

  • 2032
  • 2033
  • 2045
  • 2051
  • 2091
  • 2109
  • 2156
  • 2157
  • 2158
  • 2159
Remote Codes for Philips Television
Remote Codes for Philips Television

PHILIPS AUDIO CODES

  • 4006
  • 4027
  • 4039
  • 2304

PHILIPS AMPLIFIER CODES

  • 6047

PHILIPS VCR CODES

  • 3016
  • 3036
  • 3047
  • 3061
  • 3071
  • 3135
  • 3160
  • 3173
  • 3208
  • 3216

PHILIPS RECEIVER TUNER CODES

  • 5000
  • 5112
  • 5138
  • 5143
  • 5145
  • 5154

ON MOST REMOTES:

  • Turn the TV on.
  • Push and hold both the TV and SEL buttons for three seconds. The button will become lit.
  • With the button illuminated, point the remote at the television and input the television’s 3-, 4-, or 5-digit code.
  • Press the VOLUME + button to confirm. This should increase the TV’s volume.
  • Push the button on the television to save the 3-, 4-, or 5-digit code. The button will blink twice to indicate that the code has been saved.

Your Philips television is compatible with universal remotes from RCA, Comcast, DirecTV, Charter, and others.

PHILIPS UNIVERSAL REMOTE DVD PLAYER CODES

Philips Universal Remote DVD Player Codes
Philips Universal Remote DVD Player Codes

You can use universal remote controls to operate audio and video equipment if you know the codes. However, you must enter the correct remote codes to operate such remotes with your DVD player. Check now for the philips universal remote dvd player codes listed below.

List of Philips DVD Player Universal Remote Codes with 5 Digits

  • 22434, 21506, 21276, 22084, 20503, 20646, 21340, 21354, 22506, 2067, 21158

A Listing of Philips DVD Player Universal Remote 4-Digit Codes

  • 0885, 2033, 0503, 2318, 2404, 2051, 2109, 2091, 2033, 1911, 1914, 0646, 2302, 2318, 2243

A Listing of Philips DVD Player Universal Remote 3-Digit Codes

  • 362, 370, 387, 396, 398, 400, 408, 423, 437, 755, 891

HOW TO CONFIGURE THE PHILIPS DVD UNIVERSAL REMOTE WITHOUT THE CODES?

All universal remote codes are scanned in the remote during the auto-search procedure. It scans one code at a time to get the correct remote code for programming the control using your remote. The instructions follow:

How To Program Philips DVD Universal Remote?
How To Program Philips DVD Universal Remote?
  • “Turn On” the intelligent equipment, such as “TV,” that the universal remote will control.
  • Tap the device button (TV, DVD, CBL, and OK/SEL) to “power on” the remote for three seconds. The LED light signifies that the device is prepared for programming.
  • Aim the remote to the device and press the “CH+” and “CH-” buttons. The remote displays on/off signals. Hit the “up” or “down” key repeatedly until the device turns off.
  • Check the code by pressing the “power” key. The device should power on. Change the channel to ensure the remote is appropriately programmed if it starts.
  • To save the code, tap the “device” button. The device’s LED will blink twice to confirm the stored code.

HOW TO MANUALLY CONFIGURE A PHILIPS DVD UNIVERSAL REMOTE?

We can quickly program a universal remote by using the keycode, which also identifies the manufacturer and model of your equipment.

How To Manually Program Philips DVD Universal Remote?
How To Manually Program Philips DVD Universal Remote?
  • First, you must “Switch On The Gadget.”
  • Hit “TV” on the “DVD universal remote” from Philips.
  • Now, press and hold the “Setup” button on the universal remote until the “Light Flash” appears (this indicates that the remote is in “Learning mode”).
  • Finally, enter the “Keycode” obtained from the programming manual (Instructions Booklet)
  • Once this step has been completed, “aim your remote at the television” and then “press and hold power” button.
  • The “Power Button” can be released when the screen turns off.

If your device is still not operating, repeat the previous steps using a different code from the same section of the reference table.

FREQUENTLY ASKED QUESTIONS

What is the 4-digit code for the universal remote made by Philips?

When the on-screen prompt CURRENT CODE appears, enter the universal code “8888.” Then, input a new 4-digit access code that is simple to remember and re-enter the new code for confirmation.

How can I find the code for my Philips TV?

The MediaConnect code can be located on the TV’s menu screen. First, choose [Menu] on the remote control. Then, choose [Setup]>[Software]> [MediaConnect code] afterward. The code will be displayed on the screen’s right side.

How can I reset my universal Philips remote?

Within 6 seconds, simultaneously pressing the digits 2 and 8 should cause the LED to flicker twice. Entering code 9 8 1 causes the LED to flicker four times. The remote has been reset to factory settings.

CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts