Westinghouse Universal Remote Codes: Easy Programming Guide

Do you need the universal remote codes for your Westinghouse TV? This post describes the following codes. Below are given several universal remote control codes for Westinghouse. 

We provided many codes for every device. Hence, if one of the codes does not work, please try another. The code is often a four-digit number.

Westinghouse is one of the market’s most popular television brands. Typically, Westinghouse televisions include a remote control. But, if you lose or damage your Westinghouse TV remote, you can program the television with a universal remote.

Before using the code, you must know how to program your universal remote control to work with your Westinghouse television. How to program a Westinghouse television using a universal remote control is detailed below.

KEY TAKEAWAY:

There are multiple universal remote codes for Westinghouse televisions. Among the codes are 795, 528, 500, 553, 562, 505, and 738. You can find additional codes on websites such as The Product Analyst, Smart Home Starter, Smart TV Remote App, and Eliztech.

WESTINGHOUSE UNIVERSAL REMOTE CODES PROGRAMMING

This article lists all the working codes for your Westinghouse TV. Consider that going through the process may result in errors or repetitions of previous steps, especially if you need to be tech-savvy. 

Also, keep in mind that this will take time. Therefore, ensure that the appropriate codes are carefully entered to avoid errors that waste time and patience.

There is no doubt that you are aware that Westinghouse is one of the most well-known television brands in the world. When you buy a new Westinghouse TV, it usually comes with a remote control when delivered to you. 

How To Program GE Universal Remote Codes? Complete Guide!

What should you do if you lose or damage it by accident? In that case, we can assist you in programming your TV using Westinghouse remote codes.

There are three types of universal Westinghouse universal TV remote codes: three digits, four digits, and five digits. You may require assistance in using the remote code at times. Instead, select another legend from the list of Westinghouse universal TV remote codes below.

TIP: It is far better to write down the codes corresponding to your device’s brand so that you can quickly provide them when prompted. Apart from that, it will save you time. Here’s how to program your Westinghouse TV and other devices to work with a universal remote control:

• First, turn on the device you want to program, such as your television or any other device. Check the batteries in your remote and ensure everything works properly to avoid any interruptions during the process.

• Aim your remote control at your device to execute commands while the process is running.

• Locate the TV button on your Remote. Press the SETUP button to enter the learning mode, which prepares the remote and device for programming.

• You will then be prompted to enter the code from the provided list. To avoid errors during the procedure, ensure the code is entered correctly.

• If you followed the procedure correctly, the tiny light would blink four times as an indication. When it does, enter any of the codes listed above for your device.

• When you enter the correct code, the button light will turn off. Then, point your remote control at the television and press and hold the power button until the device turns off.

• When you turn off your device, it is an initial indication that the programming process was successful and the code was successfully stored. Please turn on your TV again to confirm its functionality.

• When the TV is turned on, try to navigate and use some buttons to see if it responds to commands. Repeat all the steps and use a different code if some buttons do not work.

If you want to connect your remote to other devices, follow the steps you used to connect it to your television.

ALL-IN-ONE WESTINGHOUSE TV CODES TABLE FOR YOUR EASE

RCA Universal Remote Codes: How To Program?

How To Program Onn Universal Remote Codes? (Complete Guide)

You’ll need the remote codes to set up the remote for your TV to make it work. Below you will find instructions on how to set your Remote in case you don’t know how to do it.

• 0002
• 0027
• 0478
• 0912
• 0916
• 3214

THREE-DIGIT WESTINGHOUSE TV REMOTE CODES TABLE FOR YOUR EASE

• 003
• 072
• 097
• 107
• 500
• 513
• 516
• 531
• 551
• 552
• 553
• 574
• 575
• 652
• 697
• 794
• 795
• 797
• 798
• 808
• 809
• 856

FOUR-DIGIT UNIVERSAL WESTINGHOUSE TV REMOTE CODES TABLE FOR YOUR EASE

• 0002
• 0013
• 0111
• 0114
• 0143
• 0451
• 0885
• 0889
• 0890
• 0915
• 1018
• 1027
• 1036
• 1146
• 1216
• 1300
• 1336
• 1430
• 1433
• 1414
• 1454
• 1489
• 1577
• 1712
• 1891
• 1901
• 2141
• 2281
• 3241
• 3251
• 3411
• 2711
• 3851
• 4797
• 5115
• 5117
• 5001
• 5054
• 5237
• 5781
• 5971
• 5981
• 5379

HOW DO YOU PROGRAM WESTINGHOUSE UNIVERSAL TV REMOTE CODES WITH A UNIVERSAL REMOTE CONTROL?

1. Turning on your Westinghouse TV will get you started.
2. Make your remote face your TV or point it towards it.
3. Select the TV option by pressing the start button on your universal Remote.
4. You can find the correct code by matching the abovementioned list with your universal Westinghouse TV remote.
5. If everything is done correctly, the tiny light should blink four times. If the procedure fails, you should restart it from the beginning.
6. After pressing any button on your universal remote code, could you wait a few seconds to ensure it works?

THE RESULTS WILL BE AVAILABLE TO YOU SHORTLY

The steps below will walk you through manually programming a Westinghouse universal remote.

• Turn on your device to begin programming your remote control.
• Select “TV” using your “Westinghouse universal remote control.”

Press “Setup” on the universal remote control for extended periods. A “LED Light Flash” will occur (indicating that it is in “Learning mode”).

• Find and enter the “Keycode” from the programming instructions (Instruction Booklet).
• After you’ve completed this technique, hold down the Power button on your Remote.
• When you release the power button, the screen will dim.

OVERVIEW OF HOW TO SET UP A BASIC REMOTE CONTROL

• Make sure that “TV” is selected under “Mode.”
• Flicker the visible LED twice while pressing the “Select” and “Mute” buttons.
• Enter the five-digit code outlined above.

Some remotes require you to enter TV mode by pressing the TV key when switching between modes. Then, press the POWER or VOLUME buttons on the Remote to test the television.

Most remote controls will select commands based on the situation. This is the most basic way to set up a remote control for a Westinghouse model.

A valid keystroke sequence can be found in the device’s instructions. Some systems allow orders to be combined, while others only allow a single command.

FREQUENTLY ASKED QUESTIONS