Roku Remote Blinking Green Light: How to Fix?(10 Easy Ways!)

How to Fix Roku Remote Blinking Green Light? If you have a Roku device and your remote control is blinking green, don’t freak out. The blinking green light is frequently a warning that something is wrong, and you should investigate and resolve the issue. Our best advice is to take action right away rather than waiting until the situation worsens.

If you don’t do the necessary steps in a timely manner, you may find that your remote controller begins to have pairing issues or fails to perform its TV control functions properly. Continue reading to learn about the causes and potential solutions to your Roku remote’s blinking green light.

How to Fix Roku Remote Blinking Green Light?

Try to these 8 easy steps to fix it

  1. Remove the Roku TV Remote
  2. Remove the batteries from the remote control.
  3. Replace the batteries in the remote. Cover should not be replaced.
  4. Connect your Roku device
  5. Hold the reset button on the remote for three seconds.
  6. Remove the battery cover and replace it.
  7. When your Roku device first starts up, you’ll see a pairing message on the screen.
  8. It should work after it pairs.

If this does not resolve your issues read on for more details.

Roku Remote Flashing Green Light: 10 Ways To Fix
Roku Remote Flashing Green Light: 10 Ways To Fix

5 Best Universal Remote For Roku TV Devices

Get Big Discounts for Internet, Phone, Mobile, and WIFI.
Up to 50% off
Toll-Free Number 1-855-202-7237
(Xfinity, Spectrum, COX, Verizon, AT&T, T-Mobile, etc.)


The blinking green light indicates that your remote controller is not working properly. Usually, there will be a warning notification on your TV screen before or around the time you start seeing a blinking green light on your remote.

Avoiding the problem will not solve it in this case. You may find yourself unable to control your Roku device at some point, which means you won’t be able to access your favorite shows and other entertainment content. That is something you do not want.

When you see a blinking green light on your remote control, it only means there is a problem with it. The more important question here is, “What’s wrong with it?” Take a look at some of the possible causes of the blinking green light on your remote.

1. The Batteries are Low

When you see the blinking green light on your Roku remote control, try replacing the batteries with new ones. If that does not resolve the issue, there is something else wrong with your remote. Some users believe that alkaline batteries are preferable for Roku remotes.

2. There is a conflict.

Interference from other wireless devices near your Roku device is a common cause of the blinking green light on the Roku remote control.

Microwaves, cordless phones and speakers, Bluetooth microphones and speakers, wireless headsets, and other similar devices are examples of wireless devices. If there is something like this close to your Roku device, there is a chance you might experience the blinking green light.

3. You Have a Faulty Remote

It’s not always about the devices surrounding your Roku device and the remote control. It could be as simple as a faulty remote control. When this happens, your only option is to replace your Roku remote.


There are several easy fixes that you can try before opting for a replacement of the remote. They include:

1. Change the Batteries

The most common cause of the blinking green light on your Roku remote, as we discovered above, is low batteries. This means that your Roku is unable to communicate with your TV because it lacks sufficient power.

The solution is simple: replace the batteries, and your remote control will function normally again. If you can avoid it, don’t let your batteries run out of power.

2. Remove any impediment

Interference from other nearby wireless devices can cause the Roku remote to blink green. So, before you replace the batteries or get a new remote, move your Roku device to a different location. This ought to suffice.

Also, keep other wireless devices away from your TV and the remote so that the blinking green light doesn’t appear again.

Alternative Video: Fix Roku Remote Blinking Green Light

Fix Roku Remote Blinking Green Light


3. Ensure Your Remote is Properly Set Up

You must ensure that your remote is properly configured. If it isn’t, you may be experiencing the blinking green light issue. Here’s how to get started with your Roku remote:


  1. Ascertain that your controller is linked to the internet.
  2. Then, to access the Remote Settings, configure the screen’s display type.
  3. Select Yes to confirm the manufacturer of your television. If your system is unable to detect the brand of your television, manually enter the information.
  4. To confirm your selection, press Yes.
  5. To continue using your Roku entertainment, click OK.

4. Re-pair the Remote

Re-pairing your Roku remote to your streaming device is another option. Typically, this method resolves some of the issues that Roku owners face. To do this correctly, follow the steps below:

  1. Unplug your Roku player.
  2. Open the battery casing with care.
  3. Remove the controller’s batteries.
  4. After a few seconds, replace the batteries.
  5. Replace the battery cover only if necessary.
  6. Connect your Roku device.
  7. Hold down the Reset button for 3 seconds, or until you see a blinking light.
  8. Reinstall the battery cover.
  9. You should see a pairing notice on the screen after the system boots.
  10. Continue with the pairing instructions.

5. Check the HDMI Connection

This solution only applies to EPA controllers and streaming sticks. (I’ll go into more detail about EPA and IR controllers later.) If you have a Roku streaming stick, you should make sure that the HDMI connection is not broken.

It would be beneficial if you did this because the HDMI may not function properly when inserted into the TV’s HDMI port. So, try a different port and see if it works properly.

If it doesn’t work as expected or you need some reassurance from Roku’s HDMI extender, apply for a free copy by providing your serial number and any other information Roku may require. After checking your EPA controller, try using the remote again and see if the green blinking light is gone.

6. Opt for a Hard Reset

Please keep in mind that this action will erase your current device settings and force you to start from scratch. If you’ve decided to go ahead, follow the steps below:


  1. Remove the battery from your Roku device.
  2. Remove the batteries and power cable from your streaming box.
  3. Allow approximately 5 minutes before reconnecting the power cable.
  4. Wait for the Roku home screen to appear on your screen.
  5. In the battery compartment, replace the batteries.
  6. Allow your remote up to 30 seconds to connect to your streaming player.

7. Download the Controller App

Download the controller app if nothing else works and you need to use your Roku device. You can use it temporarily until you get a replacement remote.

The controller app has all of the features of a standard remote, but it may take some getting used to. In order to control your TV smoothly, you’ll also need a stable Wi-Fi connection.

How To Fix Roku Remote Blinking Green Light? (10 Easy Fixes To Try)
How To Fix Roku Remote Blinking Green Light? (10 Easy Fixes To Try)

8. Replace the Remote Control

If you’ve tried replacing the batteries and removing anything that could be interfering with a direct connection with your TV, there’s a chance your Roku remote has a bug. There is no other option in this case but to replace the remote. Learn about some of the best Roku remote replacements.

9. Turn Off Your Wifi

If your remote is refusing to pair, you might try turning off your WiFi while you pair it. This may appear to be counterintuitive, but some users swear by it. The Roku remote operates on WiFi frequencies, which are frequently hampered by interference.

10. Using the Mobile App to Pair

Still unable to resolve the problem? This could work for you. You must first download and install the Roku mobile app on your phone. Then, using your phone, log in to the app and navigate to the left hand column.

Then, navigate to SETTINGS >> REMOTE >> PAIR REMOTE and follow the instructions on the remote pairing page.


The Roku remote comes in two varieties: enhanced point-anywhere (EPA) and standard infrared IR controller. The IR controller functions similarly to standard remote controls. To make any changes, you must point the remote towards your Roku device.

The EPA remote, on the other hand, can be used anywhere in the vicinity without having to point it directly at your streaming player. If you have this remote, you can try the HDMI connection fix that we previously discussed.

CONCLUSION on Roku Remote Blinking Green Light

The Roku streaming player is fantastic, but you won’t get the most out of it if the remote is broken. We’ve covered all of the possible causes and solutions for your Roku remote’s blinking green light, and we hope you find one that works for you.

The green blinking light is most likely caused by the batteries, in our opinion. As a result, that should be the first place you look. In addition, if nothing else works, the next best thing you can do (to keep using your Roku device for the time being) is to download and use the controller app.

Roku Remote Blinking Green Light
Roku Remote Blinking Green Light

FAQs on Roku Remote Flash Green

Why is causing my Roku remote to flash green color?

Normally, this green light indicates that something is wrong with your controller and it is preventing it from functioning properly.

What can I do to stop the green light on my Roku remote from blinking?

One of the fundamental steps is to remove the batteries from the compartment, clean them, and wait a few seconds before re-inserting them. Another solution is to press and hold the pairing button on your remote for a few seconds. The error will most likely disappear.

What is the implication when I notice green light blinking on my Roku?

If the light continues to flash, it indicates that there may be a problem with the connection between the Roku player and the remote. You must now remove the batteries and reinsert them after a few seconds. Plug in your Roku device and hold down the reset button for about three seconds. It will solve the problem.

CEO and Networketing at Sycamorenet | + posts

I am passionate about networking internet technology and connecting the world. I believe that we can make a difference by providing unique solutions that are reliable and easy to use. I am constantly innovating and expanding our reach to new markets. Our goal is to provide global access to affordable, high-quality internet connectivity. Join us in our mission to connect the world!

Similar Posts