This article will describe and demonstrate how to upgrade the firmware on Arris routers. In many ways, these products are considered top-of-the-line, and the most recent mesh systems offer a plethora of appealing features.
Whether you purchased your Arris router from your internet service provider or purchased it on your own, the time will come for a firmware upgrade. Unfortunately, many people are apprehensive about these types of upgrades, but there is no need to be.
The firmware update procedure is simple and should not cause any problems, even for inexperienced users.
For my Spectrum connection, I use an Arris router that I set up myself. I obtained it because I was dissatisfied with the one Spectrum provided when I signed up for their service.
I recently discovered that updating the firmware on your router is a good fix for slow internet speeds, so I decided to give it a shot.
I went to Arris’ support page and read through the manuals for my router. I also searched several user forums for information on how to update the firmware on my router. This guide is the result of that research, and it will help you update the firmware on your Arris router.
To update the firmware on your Arris router, go to the Arris support website and download the firmware for your model. Then, using the admin tool, upload the file to your router and begin the installation.
ARRIS FIRMWARE ROUTER UPDATE
Your Arris Router, like any other wireless router, has firmware that must be updated on a regular basis. When you update the firmware on your Arris Modem, the device keeps its security features up to date.
Furthermore, updating the firmware of your Arris Router adds new features to the device, limiting potential online threats from negatively impacting the device’s overall performance. As a result, it is critical to perform the Arris Router firmware update on a regular basis.
In most cases, the firmware is automatically updated; however, if your Arris Router model does not support automatic updates, you can perform a manual update.
You may encounter problems updating the firmware at times; however, you can reset the Arris Router and try updating the firmware again.
It is recommended that you read your Arris Router’s user manual to get an overview of the router’s operation as well as firmware-related information such as Arris SBG7600AC2 firmware update, Arris SB6190 firmware update, Arris DG3450A firmware, and so on.
WHY IS IT IMPORTANT TO UPDATE ROUTER FIRMWARE?
The firmware is your router’s operating system, and it controls all of its features. Updates are infrequent because firmware is “lower level” than other software.
However, these updates make significant changes to the firmware and improve the system in almost every way.
When combined with the fact that firmware updates also patch security flaws, updating the firmware on your router is just as important as updating any other software you own.
LOGIN TO THE ARRIS ROUTER USING ITS IP ADDRESS
The web-based graphical user interface is used to update the firmware (GUI). To access this interface, launch a web browser and type a default IP address into the address bar.
For the Arris routers, this will be 192.168.0.1. This address will take you to the login screen, where you must enter your administrator credentials to proceed. If you did not change the username and password when you first set up the router, they are admin and password, respectively.
BENEFITS OF UPDATING YOUR ROUTER FIRMWARE
Upgrading the firmware on your router does more than just improve your internet speeds. New updates can reduce your connection’s latency and add new features such as improved security and user management.
Firmware updates can also patch vulnerabilities in your router system that could pose a security risk, as well as fix bugs that could have previously broken your router.
Updating the firmware on your router can also update the firewall. Because your router is your system’s first point of contact with the internet, having an updated firewall is beneficial.
1. Log in to Your Router
The first thing you need to do is log in to the interface that lets you install the update to the router.
To do this:
- Open a browser window or tab.
- Type ‘192.168.0.1’ in the address bar without quotes.
- Enter the login credentials. If you have not set up a password, the default credentials are as follows:
- Username: admin
- Password: password
- Select log in.
- Red Globe On Verizon Router: What It Is & How To Fix It? (5 Easy Fixes)
- How To Fix The Yellow Light On Verizon Router? (Read More)
- How To Fix Spectrum Router Red Light? [4 Easy Fixes]
2. Find Out the Router’s Firmware Version
You must now determine what firmware version your router is running. Fortunately, you can do this directly from the tool. To begin, scan the interface for any mention of the firmware version. Make a note of it when you find it.
3. Check for the Latest Firmware Update and Download it.
Next up is to find and download the latest firmware update.
To do this, first head over to arris.com/support, then:
- Scroll down the page and select ‘Get software’ under the Software box.
- Search for the firmware for your model and hit download.
- Save the file somewhere you’ll remember.
4. Upload the Downloaded Firmware to the Router
To install the firmware update, you must upload the file you just downloaded to the router interface.
To do this:
- From the Setup page on the router interface, select Status.
- Choose Router Upgrade from the drop-down menu.
- Select Browse and navigate to the file you just downloaded.
- Select Upgrade and confirm.
- The file will be uploaded and installed. Do not switch off the router until the upload is complete.
5. Install the Firmware Update
The installation will begin automatically after you upload the file. The router will restart after the update, so don’t turn it off until it does. Check the firmware version again after installation.
Check that it has been updated to the version you just installed. If it hasn’t already, try installing it again.
6. Restart the Router
Following the completion of the update, some Arris models will restart. If yours does not, you must restart it manually. Turn off the router and wait a few minutes before re-enabling it.
ARE AUTOMATIC UPDATES AVAILABLE FOR ARRIS ROUTERS?
Manually updating the router can be time-consuming, especially if your model is obscure or an older model. Most devices receive automatic updates, but routers do not.
Some ISPs, such as AT&T, push firmware updates to their modems in stages, so it may take some time for the update to reach your router. Manually updating the software on your ISP router if it is an Arris model is a whole different can of worms.
Your ISP may not allow you to use the most recent firmware for your router, so check with them to ensure that you can install the firmware version you intend to use.
There are no automatic update features if you purchased your own Arris router. You must manually search for and install updates from their support page.
DOWNLOAD THE LATEST VERSION OF FIRMWARE FOR YOUR MODEL
Go to https://arris.secure.force.com/consumers/ in a new browser tab. Navigate the website to find your model, then check the product details for the most recent firmware version. Once you’ve found the most recent firmware version for your model, save it to your computer.
Please ensure that you have received the firmware for your specific model and not a similar one.
Even for inexperienced users, upgrading the firmware on an Arris router is a relatively simple process. Unless it is one of the discontinued models or provided by your internet service provider, you can do it in a few simple steps.
In the latter case, you’ll need to contact your Internet service provider for assistance. In all other cases, you should connect your PC, tablet or mobile to the Arris router you want to update.
A PC with wired connection using ethernet cable is preferred since it is more stable and reliable, but the Wi-Fi will also work. After you’ve updated the firmware on your router, go to speedtest.net or fast.com and run a speed test.
This can help you determine whether the firmware update has improved your speeds. If you haven’t changed your router’s default login information yet, now is a great time to do so.
After you’ve updated the firmware, go back to your router’s admin tools and look for a section titled Security or Administration. Then, change the password to something you’ll remember.
Frequently Asked Questions
How do I check the firmware on my Arris SURFboard?
In the Software Menu, look for the Firmware Version.
In the address box, type http://192.168.0.1 and press the Enter key. The https:// Redirect page will be displayed. The SURFboard Web Manager is being redirected to a more secure connection; to proceed, click the Proceed button.
How can I tell if my router’s firmware needs to be updated?
The simplest method is to use the router’s mobile app, which usually includes a check for updates option. (The name of the menu or setting varies by brand.) You can also look at your router’s web app, which is accessed by typing an IP address—typically 192.168.1.1. 0.1 or 192.168.
How do I update the firmware on my surfboard?
Download the firmware to a computer that has modem access. Set the modem to firmware upgrade mode, then upload the firmware from your computer. The manufacturer’s website should have more information.
How long does it take for an Arris modem to update?
How Long Does It Take To Update Modem Firmware? When not in use, turn off the router. Once the upload is complete, your router will restart. An update usually takes between three and five minutes.