How To Fix Whirlpool Refrigerator LED Lights Not Working? [Solved, 4 Easy Ways]

My Whirlpool refrigerator has been performing admirably, but the LED lights inside the refrigerator have recently stopped working. So I went through all of the help documents and the user manual to figure out how to fix it, and this is what I discovered.

The following are the steps to repair Whirlpool refrigerator LED lights not working issue:

1. Check that the door hasn’t been left open for an extended period of time.
2. Examine the door switch that operates the LED light.
3. Check that the wiring harness is properly connected.
4. Restart your Whirlpool refrigerator.
5. Purchase a replacement LED light.

If you’ve tried everything and it’s still not working, it’s time to call a refrigerator repairman. You may also lack hands-on experience, and some of the steps may be too difficult for you to complete.

However, if you can use a screwdriver, you should be able to perform all of the above checks on your own. I’ll go over each of these steps in detail below so you know exactly what to do:

Troubleshooting: Issues on Fixing Whirlpool Refrigerator LED Lights

Issue	Solution
The LED lights are not working	Make sure the light bulbs are properly installed and that they are not burned out. You can also try resetting the refrigerator.
The LED lights are flickering	This could be a sign of a problem with the power supply, the light bulbs, or the control board. You should contact a qualified technician to diagnose and repair the problem.
The LED lights are not the correct color	You can replace the light bulbs with bulbs of the desired color.
The LED lights are too bright	You can adjust the brightness of the LED lights in the refrigerator settings.
The LED lights are not evenly lit	This could be a sign of a problem with the light bulbs, the light diffuser, or the control board. You should contact a qualified technician to diagnose and repair the problem.

WHIRLPOOL REFRIGERATOR LED LIGHTS NOT WORKING (OFF OR OUT)

When your refrigerator LED lights aren’t working, it can be difficult to see what’s inside, especially at night when only a few lights are turned on. So, how do you generally repair LED lights that aren’t working?

The LED light is activated and deactivated by a small switch located on the door’s hinge. When you close the door, it is pressed in. It’s best to inspect it first because it could be broken. Otherwise, the wiring or the bulb may be damaged.

There are some steps to try in order, and they are as follows:

Step 1: Check that the door hasn’t been open for a long time

If the door is left open for more than 10 minutes, the light will turn off automatically to conserve energy. The light may remain on if your door isn’t completely closed due to something blocking it. When you open the door, the light remains off. As a result, you should check the door switch.

Step 2: Examine the light switch that operates the LED light.

The light switch is typically located on the top of a Whirlpool refrigerator and is labeled “light switch.”

Look for it quickly, and if you can’t find it, consult the user manual for your refrigerator, which you can find on the Whirlpool website. It is, however, always located somewhere where the door touches the rest of the fridge as it closes.

The switch may be broken, and the spring in the tab that is pressed in as the door closes to turn on and off the light may be broken. As a result, when the door opens and closes, the tab does not get pressed in or bounced out.

Alternative Video: LED Light Flickering On Whirlpool Refrigerator

RECOMMENDED POSTS:

• Whirlpool Washer Wont Lock/Turn On/Unlock/Turn Off: How To Fix? [5 Easy Fixes]
• Whirlpool Washer Sensing Light Flashing: How To Fix? [7 Easy Methods]
• View: Whirlpool Washer Not Working/Repeating Cycle/Keeps Draining/Shuts Off

Step 3: Double check the wiring harness is connected

This can only be checked if you are reasonably skilled with your hands. Because this step necessitates removing one of your refrigerator’s panels in order to access the wiring underneath.

The LED light is connected to the fridge’s main power supply. The plug does not resemble a standard plug that you would plug into a wall outlet at home. However, it operates in the same manner.

When your LED light isn’t working, Whirlpool recommends checking the wiring harness, but says it’s more likely if you recently moved your fridge, which can cause it to be shaken loose.

Step 4: Power cycle your Whirlpool refrigerator

Refrigerators are similar to devices such as televisions, smartphones, and computers in that simply turning them on and off again can resolve a large percentage of problems.

Simply unplug your refrigerator from the wall. Remove the plug and wait for 30 seconds to a minute. Then reconnect it and turn on the wall outlet. Check to see if your LED light is now operational.

Step 5: Purchase a replacement LED light

If none of those solutions worked for you, replacing your LED light is a relatively simple process. The entire compartment in which the light is housed can be unscrewed, lifted out, and unplugged from where it plugs.

A new one can then be plugged in, screwed in, and tightened. If it sounds too difficult, similar to step 3, where you check the wiring harness, it’s best to have a technician come in and fix it for you.

However, if it sounds like something you might be able to do, you can order a replacement part online. You could try Ebay or a specialist website that sells Whirlpool parts, and then replace it yourself using your manual and/or some online videos.

WHIRLPOOL REFRIGERATOR LED LIGHTS FLASHING/BLINKING

It is possible that your LED light will not turn on at all. Instead, it blinks on and off. Here’s what you should do to resolve this issue:

This is usually related to the wiring that connects to your LED light or the wiring inside the bulb. When the light breaks, the component that holds the LED light, including the wiring, is replaced. However, it’s also possible that the plug to which the LED light is connected is loose.

The plug connects and disconnects, and the light turns on and off as a result. It’s also possible that the light switch that turns on and off the LED light when you open and close your refrigerator is broken.

If it is, it may be stuck between the on and off positions, causing the light to turn on and off at random. The steps to resolve all of these issues have been outlined above, and they remain the same if your LED light ceases to function.

So, scroll to the top of the page to step 1, which says ‘1. Check that the door hasn’t been left open for an extended period of time’.

WHIRLPOOL REFRIGERATOR LED LIGHTS DIM

LED lights in your refrigerator or freezer may also appear dimmer than usual. Because there is no switch to turn them on or off, the LED lights must be replaced. In most cases, this is caused by a faulty LED light.

A series connection connects all of the lights in a Whirlpool refrigerator. As a result, if one LED light fails, it can cause the other lights to dim. It may be necessary to order two lights to determine whether one or all of the lights are defective.

For example, if the light in your fridge is broken, the freezer light will be dim. However, simply replacing your freezer light may not solve the problem. Several master technicians advise replacing the light in question first to see if that resolves the issue.

If not, you’ll need to order a replacement light for the fridge or freezer to determine which light is broken. It’s possible that turning your fridge on and off will solve the problem, and it’s a quick and simple fix.

Simply unplug your refrigerator from the wall and wait 30 seconds or more. Then reconnect it. If that doesn’t work, you should order a replacement part and replace the LED light yourself. Alternatively, have a technician come in and repair it for you.

DEVICE IS ON SABBATH MODE

The Sabbath Mode is intended for travelers or those whose religious practices necessitate turning off the lights. When this option is selected, the temperature settings remain unchanged, but the control panel, interior lighting, and sound indicator lights are turned off.

It is recommended that you exit Saturday mode once it is no longer necessary to work as efficiently as possible. If you activate Saturday mode by accident, the word “Saturday” will appear on the screen.

The ability of the model to enter and exit Saturday mode varies. As a result, refer to the operating instructions for specific instructions on this model.

CONCLUSION

If this whirlpool fridge led light not working troubleshooting does not work for you, you can now seek professional assistance. This problem is most likely caused by a problem with the wiring connecting to your led light.

You don’t have to replace the led light every time it stops working; these smaller and simpler fixes will suffice in the majority of cases.

Frequently Asked Questions